Difference between revisions of "2.0/Configuration"

From AnopeWiki
Jump to: navigation, search
Line 1: Line 1:
 
{{Language|2.0/Modules}}
 
{{Language|2.0/Modules}}
  
 +
** These are ALL example configuration files, as found in the Anope 2.0 Source **
 
== <div class="moduleheader">Main Configuration</div> ==
 
== <div class="moduleheader">Main Configuration</div> ==
  

Revision as of 22:10, 31 May 2014

Language

English

    • These are ALL example configuration files, as found in the Anope 2.0 Source **

Main Configuration

Example Conf

/*
 * Example configuration file for Services. After making the appropriate
 * changes to this file, place it in the Services conf directory (as
 * specified in the "configure" script, default /home/username/services/conf)
 * under the name "services.conf".
 *
 * The format of this file is fairly simple: three types of comments are supported:
 *  - All text after a '#' on a line is ignored, as in shell scripting
 *  - All text after '//' on a line is ignored, as in C++
 *  - A block of text like this one is ignored, as in C
 *
 * Outside of comments, there are three structures: blocks, keys, and values.
 *
 * A block is a named container, which contains a number of key to value pairs
 * - you may think of this as an array.
 *
 * A block is created like so:
 * foobar
 * {
 *    moo = "cow"
 *    foo = bar
 * }
 *
 * Note that nameless blocks are allowed and are often used with comments to allow
 * easily commenting an entire block, for example:
 * #foobar
 * {
 *    moo = "cow"
 *    foo = bar
 * }
 * is an entirely commented block.
 *
 * Keys are case insensitive. Values depend on what key - generally, information is
 * given in the key comment. The quoting of values (and most other syntax) is quite
 * flexible, however, please do not forget to quote your strings:
 *
 *   "This is a parameter string with spaces in it"
 *
 * If you need to include a double quote inside a quoted string, precede it
 * by a backslash:
 *
 *   "This string has \"double quotes\" in it"
 *
 * Time parameters can be specified either as an integer representing a
 * number of seconds (e.g. "3600" = 1 hour), or as an integer with a unit
 * specifier: "s" = seconds, "m" = minutes, "h" = hours, "d" = days.
 * Combinations (such as "1h30m") are not permitted. Examples (all of which
 * represent the same length of time, one day):
 *
 *   "86400", "86400s", "1440m", "24h", "1d"
 *
 * In the documentation for each directive, one of the following will be
 * included to indicate whether an option is required:
 *
 * [REQUIRED]
 *     Indicates a directive which must be given. Without it, Services will
 *     not start.
 *
 * [RECOMMENDED]
 *     Indicates a directive which may be omitted, but omitting it may cause
 *     undesirable side effects.
 *
 * [OPTIONAL]
 *     Indicates a directive which is optional. If not given, the feature
 *     will typically be disabled. If this is not the case, more
 *     information will be given in the documentation.
 *
 * [DISCOURAGED]
 *     Indicates a directive which may cause undesirable side effects if
 *     specified.
 *
 * [DEPRECATED]
 *     Indicates a directive which will disappear in a future version of
 *     Services, usually because its functionality has been either
 *     superseded by that of other directives or incorporated into the main
 *     program.
 */
 
/*
 * [OPTIONAL] Defines
 *
 * You can define values to other values, which can be used to easily change
 * many values in the configuration. at once.
 */
 
/*
 * The services.host define is used in multiple different locations throughout the
 * configuration for services clients hostnames.
 */
define
{
	name = "services.host"
	value = "services.localhost.net"
}
 
/*
 * [OPTIONAL] Additional Includes
 *
 * You can include additional configuration files here.
 * You may also include executable files, which will be executed and
 * the output from it will be included into your configuration.
 */
 
#include
{
	type = "file"
	name = "some.conf"
}
 
#include
{
	type = "executable"
	name = "/usr/bin/wget -q -O - http://some.misconfigured.network.com/services.conf"
}
 
/*
 * [REQUIRED] IRCd Config
 *
 * This section is used to set up Anope to connect to your IRC network.
 * This section can be included multiple times, and Anope will attempt to
 * connect to each server until it finally connects.
 *
 * Each uplink IRCd should have a corresponding configuration to allow Services
 * to link to it.
 *
 * An example configuration for InspIRCd that is compatible with the below uplink
 * and serverinfo configuration would look like:
 *
 *     <link name="services.localhost.net"
 *           ipaddr="127.0.0.1"
 *           port="7000"
 *           sendpass="mypassword"
 *           recvpass="mypassword">
 *     <uline server="services.localhost.net" silent="yes">
 *     <bind address="127.0.0.1" port="7000" type="servers">
 *
 * An example configuration for UnrealIRCd that is compatible with the below uplink
 * and serverinfo configuration would look like:
 *
 *     link services.localhost.net
 *     {
 *          username *;
 *          hostname *;
 *          bind-ip "127.0.0.1";
 *          port 7000;
 *          hub *;
 *          password-connect "mypassword";
 *          password-receive "mypassword";
 *          class servers;
 *     };
 *     ulines { services.localhost.net; };
 *     listen 127.0.0.1:7000;
 */
uplink
{
	/*
	 * The IP or hostname of the IRC server you wish to connect Services to.
	 * Usually, you will want to connect Services over 127.0.0.1 (aka localhost).
	 *
	 * NOTE: On some shell providers, this will not be an option.
	 */
	host = "127.0.0.1"
 
	/*
	 * Enable if Services should connect using IPv6.
	 */
	ipv6 = no
 
	/*
	 * Enable if Services should connect using SSL.
	 * You must have an SSL module loaded for this to work.
	 */
	ssl = no
 
	/*
	 * The port to connect to.
	 * The IRCd *MUST* be configured to listen on this port, and to accept
	 * server connections.
	 *
	 * Refer to your IRCd documentation for how this is to be done.
	 */
	port = 7000
 
	/*
	 * The password to send to the IRC server for authentication.
	 * This must match the link block on your IRCd.
	 *
	 * Refer to your IRCd documentation for more information on link blocks.
	 */
	password = "mypassword"
}
 
/*
 * [REQUIRED] Server Information
 *
 * This section contains information about the Services server.
 */
serverinfo
{
	/*
	 * The hostname that Services will be seen as, it must have no conflicts with any
	 * other server names on the rest of your IRC network. Note that it does not have
	 * to be an existing hostname, just one that isn't on your network already.
	 */
	name = "services.localhost.net"
 
	/*
	 * The text which should appear as the server's information in /whois and similar
	 * queries.
	 */
	description = "Services for IRC Networks"
 
	/*
	 * The local address that Services will bind to before connecting to the remote
	 * server. This may be useful for multihomed hosts. If omitted, Services will let
	 * the Operating System choose the local address. This directive is optional.
	 *
	 * If you don't know what this means or don't need to use it, just leave this
	 * directive commented out.
	 */
	#localhost = "nowhere."
 
	/*
	 * What Server ID to use for this connection?
	 * Note: This should *ONLY* be used for TS6/P10 IRCds. Refer to your IRCd documentation
	 * to see if this is needed.
	 */
	#id = "00A"
 
	/*
	 * The filename containing the Services process ID. The path is relative to the
	 * services root directory.
	 */
	pid = "data/services.pid"
 
	/*
	 * The filename containing the Message of the Day. The path is relative to the
	 * services root directory.
	 */
	motd = "conf/services.motd"
}
 
/*
 * [REQUIRED] Protocol module
 *
 * This directive tells Anope which IRCd Protocol to speak when connecting.
 * You MUST modify this to match the IRCd you run.
 *
 * Supported:
 *  - bahamut
 *  - charybdis
 *  - hybrid
 *  - inspircd12
 *  - inspircd20
 *  - ngircd
 *  - plexus
 *  - ratbox
 *  - unreal
 */
module
{
	name = "inspircd20"
 
	/*
	 * Some protocol modules can enforce mode locks server-side. This reduces the spam caused by
	 * services immediately reversing mode changes for locked modes.
	 *
	 * If the protocol module you have loaded does not support this, this setting will have no effect.
	 */
	use_server_side_mlock = yes
 
	/*
	 * Some protocol modules can enforce topic locks server-side. This reduces the spam caused by
	 * services immediately reversing topic changes.
	 *
	 * If the protocol module you have loaded does not support this, this setting will have no effect.
	 */
	use_server_side_topiclock = yes
}
 
/*
 * [REQUIRED] Network Information
 *
 * This section contains information about the IRC network that Services will be
 * connecting to.
 */
networkinfo
{
	/*
	 * This is the name of the network that Services will be running on.
	 */
	networkname = "LocalNet"
 
	/*
	 * Set this to the maximum allowed nick length on your network.
	 * Be sure to set this correctly, as setting this wrong can result in
	 * Services being disconnected from the network.
	 */
	nicklen = 31
 
	/* Set this to the maximum allowed ident length on your network.
	 * Be sure to set this correctly, as setting this wrong can result in
	 * Services being disconnected from the network.
	 */
	userlen = 10
 
	/* Set this to the maximum allowed hostname length on your network.
	 * Be sure to set this correctly, as setting this wrong can result in
	 * Services being disconnected from the network.
	 */
	hostlen = 64
 
	/* Set this to the maximum allowed channel length on your network.
	 */
	chanlen = 32
 
	/* The maximum number of list modes settable on a channel (such as b, e, I).
	 * Comment out or set to 0 to disable.
	 */
	modelistsize = 100
 
	/*
	 * The characters allowed in hostnames. This is used for validating hostnames given
	 * to services, such as BotServ bot hostnames and user vhosts. Changing this is not
	 * recommended unless you know for sure your IRCd supports whatever characters you are
	 * wanting to use. Telling services to set a vHost containing characters your IRCd
	 * disallows could potentially break the IRCd and/or Services.
	 *
	 * It is recommended you DON'T change this.
	 */
	vhost_chars = "abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-"
 
	/*
	 * If set to true, allows vHosts to not contain dots (.).
	 * Newer IRCds generally do not have a problem with this, but the same warning as
	 * vhost_chars applies.
	 *
	 * It is recommended you DON'T change this.
	 */
	allow_undotted_vhosts = false
 
	/*
	 * The characters that are not allowed to be at the very beginning or very ending
	 * of a vHost. The same warning as vhost_chars applies.
	 *
	 * It is recommended you DON'T change this.
	 */
	disallow_start_or_end = ".-"
}
 
/*
 * [REQUIRED] Services Options
 *
 * This section contains various options which determine how Services will operate.
 */
options
{
	/*
	 * On Linux/UNIX systems Anope can setuid and setgid to this user and group
	 * after starting up. This is useful if Anope has to bind to privileged ports
	 */
	#user = "anope"
	#group = "anope"
 
	/*
	 * The case mapping used by services. This must be set to a valid locale name
	 * installed on your machine. Services use this case map to compare, with
	 * case insensitivity, things such as nick names, channel names, etc.
	 *
	 * We provide two special casemaps shipped with Anope, ascii and rfc1459.
	 *
	 * This value should be set to what your IRCd uses, which is probably rfc1459,
	 * however Anope has always used ascii for comparison, so the default is ascii.
	 *
	 * Changing this value once set is not recommended.
	 */
	casemap = "ascii"
 
	/*
	 * This key is used to initiate the random number generator. This number
	 * MUST be random as you want your passcodes to be random. Don't give this
	 * key to anyone! Keep it private!
	 *
	 * NOTE: If you don't uncomment this or keep the default values, any talented
	 * programmer would be able to easily "guess" random strings used to mask
	 * information. Be safe, and come up with a 7-digit number.
	 *
	 * This directive is optional, but highly recommended.
	 */
	#seed = 9866235
 
	/*
	 * If set, Services will perform more stringent checks on passwords. If this
	 * isn't set, Services will only disallow a password if it is the same as the
	 * entity (nickname name) with which it is associated. When set, however,
	 * Services will also check that the password is at least five
	 * characters long, and in the future will probably check other things
	 * as well.
	 *
	 * This directive is optional, but recommended.
	 */
	strictpasswords = yes
 
	/*
	 * Sets the number of invalid password tries before Services removes a user
	 * from the network. If a user enters a number of invalid passwords equal to
	 * the given amount for any Services function or combination of functions
	 * during a single IRC session (subject to badpasstimeout, below), Services
	 * will issues a /KILL for the user. If not given, Services will ignore
	 * failed password attempts (though they will be logged in any case).
	 *
	 * This directive is optional, but recommended.
	 */
	badpasslimit = 5
 
	/*
	 * Sets the time after which invalid passwords are forgotten about. If a user
	 * does not enter any incorrect passwords in this amount of time, the incorrect
	 * password count will reset to zero. If not given, the timeout will be
	 * disabled, and the incorrect password count will never be reset until the user
	 * disconnects.
	 *
	 * This directive is optional.
	 */
	badpasstimeout = 1h
 
	/*
	 * Sets the delay between automatic database updates.
	 */
	updatetimeout = 5m
 
	/*
	 * Sets the delay between checks for expired nicknames and channels.
	 */
	expiretimeout = 30m
 
	/*
	 * Sets the timeout period for reading from the uplink.
	 */
	readtimeout = 5s
 
	/*
	 * Sets the interval between sending warning messages for program errors via
	 * WALLOPS/GLOBOPS.
	 */
	warningtimeout = 4h
 
	/*
	 * Sets the (maximum) frequency at which the timeout list is checked. This,
	 * combined with readtimeout above, determines how accurately timed events,
	 * such as nick kills, occur; it also determines how much CPU time Services
	 * will use doing this. Higher values will cause less accurate timing but
	 * less CPU usage.
	 *
	 * Note that this value is not an absolute limit on the period between
	 * checks of the timeout list; the previous may be as great as readtimeout
	 * (above) during periods of inactivity.
	 *
	 * If this directive is not given, it will default to 0.
	 */
	timeoutcheck = 3s
 
	/*
	 * If set, this will allow users to let Services send PRIVMSGs to them
	 * instead of NOTICEs. Also see the defmsg option of nickserv:defaults,
	 * which also toggles the default communication (PRIVMSG or NOTICE) to
	 * use for unregistered users.
	 *
	 * This is a feature that is against the IRC RFC and should be used ONLY
	 * if absolutely necessary.
	 *
	 * This directive is optional, and not recommended.
	 */
	#useprivmsg = yes
 
	/*
	 * If set, will force Services to only respond to PRIVMSGs addresses to
	 * Nick@ServerName - e.g. NickServ@localhost.net. This should be used in
	 * conjunction with IRCd aliases. This directive is optional.
	 *
	 * This option will have no effect on some IRCds, such as TS6 IRCds.
	 */
	#usestrictprivmsg = yes
 
	/*
	 * If set, Services will only show /stats o to IRC Operators. This directive
	 * is optional.
	 */
	#hidestatso = yes
 
	/*
	 * A space-separated list of ulined servers on your network, it is assumed that
	 * the servers in this list are allowed to set channel modes and Services will
	 * not attempt to reverse their mode changes.
	 *
	 * WARNING: Do NOT put your normal IRC user servers in this directive.
	 *
	 * This directive is optional.
	 */
	#ulineservers = "stats.your.network"
 
	/*
	 * How long to wait between connection retries with the uplink(s).
	 */
	retrywait = 60s
 
	/*
	 * If set, Services will hide commands that users don't have the privilege to execute
	 * from HELP output.
	 */
	hideprivilegedcommands = yes
 
	/*
	 * If set, Services will hide commands that users can't execute because they are not
	 * logged in from HELP output.
	 */
	hideregisteredcommands = yes
 
	/* The regex engine to use, as provided by the regex modules.
	 * Leave commented to disable regex matching.
	 *
	 * Note for this to work the regex module providing the regex engine must be loaded.
	 */
	regexengine = "regex/pcre"
 
	/*
	 * A list of languages to load on startup that will be available in /nickserv set language.
	 * Useful if you translate Anope to your language. (Explained further in docs/LANGUAGE).
	 * Note that english should not be listed here because it is the base language.
	 *
	 * Removing .UTF-8 will instead use the default encoding for the language, eg. iso-8859-1 for western European languages.
	 */
	languages = "ca_ES.UTF-8 de_DE.UTF-8 el_GR.UTF-8 es_ES.UTF-8 fr_FR.UTF-8 hu_HU.UTF-8 it_IT.UTF-8 nl_NL.UTF-8 pl_PL.UTF-8 pt_PT.UTF-8 ru_RU.UTF-8 tr_TR.UTF-8"
 
	/*
	 * Default language that non- and newly-registered nicks will receive messages in.
	 * Set to "en" to enable English. Defaults to the language the system uses.
	 */
	#defaultlanguage = "es_ES.UTF-8"
}
 
/*
 * [OPTIONAL] BotServ
 *
 * Includes botserv.example.conf, which is necessary for BotServ functionality.
 *
 * Remove this block to disable BotServ.
 */
include
{
	type = "file"
	name = "botserv.example.conf"
}
 
/*
 * [RECOMMENDED] ChanServ
 *
 * Includes chanserv.example.conf, which is necessary for ChanServ functionality.
 *
 * Remove this block to disable ChanServ.
 */
include
{
	type = "file"
	name = "chanserv.example.conf"
}
 
/*
 * [RECOMMENDED] Global
 *
 * Includes global.example.conf, which is necessary for Global functionality.
 *
 * Remove this block to disable Global.
 */
include
{
	type = "file"
	name = "global.example.conf"
}
 
/*
 * [OPTIONAL] HostServ
 *
 * Includes hostserv.example.conf, which is necessary for HostServ functionality.
 *
 * Remove this block to disable HostServ.
 */
include
{
	type = "file"
	name = "hostserv.example.conf"
}
 
/*
 * [OPTIONAL] MemoServ
 *
 * Includes memoserv.example.conf, which is necessary for MemoServ functionality.
 *
 * Remove this block to disable MemoServ.
 */
include
{
	type = "file"
	name = "memoserv.example.conf"
}
 
/*
 * [OPTIONAL] NickServ
 *
 * Includes nickserv.example.conf, which is necessary for NickServ functionality.
 *
 * Remove this block to disable NickServ.
 */
include
{
	type = "file"
	name = "nickserv.example.conf"
}
 
/*
 * [RECOMMENDED] OperServ
 *
 * Includes operserv.example.conf, which is necessary for OperServ functionality.
 *
 * Remove this block to disable OperServ.
 */
include
{
	type = "file"
	name = "operserv.example.conf"
}
 
/*
 * [RECOMMENDED] Logging Configuration
 *
 * This section is used for configuring what is logged and where it is logged to.
 * You may have multiple log blocks if you wish. Remember to properly secure any
 * channels you choose to have Anope log to!
 */
log
{
	/*
	 * Target(s) to log to, which may be one of the following:
	 *   - a channel name
	 *   - a filename
	 *   - globops
	 */
	target = "services.log"
 
	/* Log to both services.log and the channel #services
	 *
	 * Note that some older IRCds, such as Ratbox, require services to be in the
	 * log channel to be able to message it. To do this, configure service:channels to
	 * join your logging channel.
	 */
	#target = "services.log #services"
 
	/*
	 * The source(s) to only accept log messages from. Leave commented to allow all sources.
	 * This can be a users name, a channel name, one of our clients (eg, OperServ), or a server name.
	 */
	#source = ""
 
	/*
	 * The bot used to log generic messages which have no predefined sender if there
	 * is a channel in the target directive.
	 */
	bot = "Global"
 
	/*
	 * The number of days to keep logfiles, only useful if you are logging to a file.
	 * Set to 0 to never delete old logfiles.
	 *
	 * Note that Anope must run 24 hours a day for this feature to work correctly.
	 */
	logage = 7
 
	/*
	 * What types of log messages should be logged by this block. There are nine general categories:
	 *
	 *  admin      - Execution of admin commands (OperServ, etc).
	 *  override   - A services operator using their powers to execute a command they couldn't normally.
	 *  commands   - Execution of general commands.
	 *  servers    - Server actions, linking, squitting, etc.
	 *  channels   - Actions in channels such as joins, parts, kicks, etc.
	 *  users      - User actions such as connecting, disconnecting, changing name, etc.
	 *  other      - All other messages without a category.
	 *  rawio      - Logs raw input and output from services
	 *  debug      - Debug messages (log files can become VERY large from this).
	 *
	 * These options determine what messages from the categories should be logged. Wildcards are accepted, and
	 * you can also negate values with a ~. For example, "~operserv/akill operserv/*" would log all operserv
	 * messages except for operserv/akill. Note that processing stops at the first matching option, which
	 * means "* ~operserv/*" would log everything because * matches everything.
	 *
	 * Valid admin, override, and command options are:
	 *    pesudo-serv/commandname (eg, operserv/akill, chanserv/set)
	 *
	 * Valid server options are:
	 *    connect, quit, sync, squit
	 *
	 * Valid channel options are:
	 *    create, destroy, join, part, kick, leave, mode
	 *
	 * Valid user options are:
	 *    connect, disconnect, quit, nick, ident, host, mode, maxusers, oper
	 *
	 * Rawio and debug are simple yes/no answers, there are no types for them.
	 *
	 * Note that modules may add their own values to these options.
	 */
	admin = "*"
	override = "chanserv/* nickserv/* memoserv/set ~botserv/set botserv/*"
	commands = "~operserv/* *"
	servers = "*"
	#channels = "~mode *"
	users = "connect disconnect nick"
	other = "*"
	rawio = no
	debug = no
}
 
/*
 * A log block to globops some useful things.
 */
log
{
	target = "globops"
	admin = "global/* operserv/mode operserv/kick operserv/akill operserv/s*line operserv/noop operserv/jupe operserv/oline operserv/set operserv/svsnick operserv/svsjoin operserv/svspart nickserv/getpass */drop"
	servers = "squit"
	users = "oper"
	other = "expire/* bados akill/*"
}
 
/*
 * [RECOMMENDED] Oper Access Config
 *
 * This section is used to set up staff access to restricted oper only commands.
 * You may define groups of commands and privileges, as well as who may use them.
 *
 * This block is recommended, as without it you will be unable to access most oper commands.
 * It replaces the old ServicesRoot directive amongst others.
 *
 * The command names below are defaults and are configured in the *serv.conf's. If you configure
 * additional commands with permissions, such as commands from third party modules, the permissions
 * must be included in the opertype block before the command can be used.
 *
 * Available privileges:
 *  botserv/administration        - Can view and assign private BotServ bots
 *  chanserv/administration       - Can modify the settings of any channel (including changing of the owner!)
 *  chanserv/access/modify        - Can modify channel access and akick lists, and use /chanserv enforce
 *  chanserv/auspex               - Can see any information with /chanserv info
 *  chanserv/no-register-limit    - May register an unlimited number of channels and nicknames
 *  chanserv/kick                 - Can kick and ban users from channels through ChanServ
 *  memoserv/info                 - Can see any information with /memoserv info
 *  memoserv/set-limit            - Can set the limit of max stored memos on any user and channel
 *  memoserv/no-limit             - Can send memos through limits and throttles
 *  nickserv/access               - Can modify other users access and certificate lists
 *  nickserv/alist                - Can see the channel access list of other users
 *  nickserv/auspex               - Can see any information with /nickserv info
 *  nickserv/confirm              - Can confirm other users nicknames
 *  nickserv/drop                 - Can drop other users nicks
 *  operserv/config               - Can modify services's configuration
 *  protected                     - Can not be kicked from channels by Services
 *
 * Available commands:
 *   botserv/bot/del          botserv/bot/add               botserv/bot/change        botserv/set/private
 *   botserv/set/nobot
 *
 *   chanserv/access/list     chanserv/drop                 chanserv/getkey           chanserv/invite
 *   chanserv/list            chanserv/suspend              chanserv/topic
 *
 *   chanserv/saset/bantype   chanserv/saset/description    chanserv/saset/email       chanserv/saset/keepmodes
 *   chanserv/saset/founder   chanserv/saset/keeptopic      chanserv/saset/restricted
 *   chanserv/saset/peace     chanserv/saset/persist        chanserv/saset/private
 *   chanserv/saset/secure    chanserv/saset/securefounder  chanserv/saset/secureops
 *   chanserv/saset/signkick  chanserv/saset/successor      chanserv/saset/topiclock
 *   chanserv/saset/url       chanserv/saset/noexpire       chanserv/saset/autoop
 *
 *   memoserv/sendall        memoserv/staff
 *
 *   nickserv/getpass        nickserv/getemail      nickserv/suspend      nickserv/ajoin
 *   nickserv/list
 *
 *   nickserv/saset/autoop     nickserv/saset/email   nickserv/saset/greet     nickserv/saset/password
 *   nickserv/saset/display    nickserv/saset/kill    nickserv/saset/language  nickserv/saset/message
 *   nickserv/saset/private    nickserv/saset/secure  nickserv/saset/url       nickserv/saset/noexpire
 *   nickserv/saset/keepmodes
 *
 *   hostserv/set            hostserv/del           hostserv/list
 *
 *   global/global
 *
 *   operserv/news         operserv/stats        operserv/kick       operserv/exception    operserv/seen
 *   operserv/mode         operserv/session      operserv/modinfo    operserv/ignore       operserv/chanlist
 *   operserv/chankill     operserv/akill        operserv/sqline     operserv/snline       operserv/userlist
 *   operserv/oper         operserv/config       operserv/umode      operserv/logsearch
 *   operserv/modload      operserv/jupe         operserv/set        operserv/noop
 *   operserv/quit         operserv/update       operserv/reload     operserv/restart
 *   operserv/shutdown     operserv/svs          operserv/oline      operserv/kill
 *
 * Firstly, we define 'opertypes' which are named whatever we want ('Network Administrator', etc).
 * These can contain commands for oper-only strings (see above) which grants access to that specific command,
 * and privileges (which grant access to more general permissions for the named area).
 * Wildcard entries are permitted for both, e.g. 'commands = "operserv/*"' for all OperServ commands.
 *
 * Below are some default example types, but this is by no means exhaustive,
 * and it is recommended that you configure them to your needs.
 */
 
opertype
{
	/* The name of this opertype */
	name = "Helper"
 
	/* What commands (see above) this opertype has */
	commands = "hostserv/*"
}
 
opertype
{
	/* The name of this opertype */
	name = "Services Operator"
 
	/* What opertype(s) this inherits from. Seperate with a comma. */
	inherits = "Helper, Another Helper"
 
	/* What commands (see above) this opertype may use */
	commands = "chanserv/list chanserv/suspend chanserv/topic memoserv/staff nickserv/list nickserv/suspend operserv/mode operserv/chankill operserv/akill operserv/session operserv/modinfo operserv/sqline operserv/oper operserv/kick operserv/ignore operserv/snline"
 
	/* What privs (see above) this opertype has */
	privs = "chanserv/auspex chanserv/no-register-limit memoserv/* nickserv/auspex nickserv/confirm"
 
	/*
	 * Modes to be set on users when they identify to accounts linked to this opertype.
	 *
	 * This can be used to automatically oper users who identify for services operator accounts, and is
	 * useful for setting modes such as Plexus's user mode +N.
	 *
	 * Note that some IRCds, such as InspIRCd, do not allow directly setting +o, and this will not work.
	 */
	#modes = "+o"
}
 
opertype
{
	name = "Services Administrator"
 
	inherits = "Services Operator"
 
	commands = "chanserv/access/list chanserv/drop chanserv/getkey chanserv/saset/noexpire memoserv/sendall nickserv/saset/* nickserv/getemail operserv/news operserv/jupe operserv/svs operserv/stats operserv/oline operserv/noop operserv/forbid global/*"
 
	privs = "*"
}
 
opertype
{
	name = "Services Root"
 
	commands = "*"
 
	privs = "*"
}
 
/*
 * After defining different types of operators in the above opertype section, we now define who is in these groups
 * through 'oper' blocks, similar to ircd access.
 *
 * The default is to comment these out (so NOBODY will have Services access).
 * You probably want to add yourself and a few other people at minimum.
 *
 * As with all permissions, make sure to only give trustworthy people access to Services.
 */
 
#oper
{
	/* The nickname of this services oper */
	#name = "nick1"
 
	/* The opertype this person will have */
	type = "Services Root"
 
	/* If set, the user must be an oper on the IRCd to gain their Services
	 * oper privileges.
	 */
	require_oper = yes
 
	/* An optional password. If defined the user must login using "/msg OperServ LOGIN" first */
	#password = "secret"
 
	/* An optional SSL fingerprint. If defined, it's required to be able to use this opertype. */
	#certfp = "ed3383b3f7d74e89433ddaa4a6e5b2d7"
 
	/* An optional list of user@host masks. If defined the user must be connected from one of them */
	#host = "*@*.anope.org ident@*"
 
	/* An optional vHost to set on users who identify for this oper block.
	 * This will override HostServ vHosts, and may not be available on all IRCds
	 */
	#vhost = "oper.mynet"
}
 
#oper
{
	name = "nick2"
	type = "Services Administrator"
}
 
#oper
{
	name = "nick3"
	type = "Helper"
}
 
/*
 * [OPTIONAL] Mail Config
 *
 * This section contains settings related to the use of e-mail from Services.
 * If the usemail directive is set to yes, unless specified otherwise, all other
 * directives are required.
 *
 * NOTE: Users can find the IP of the machine services is running on by examining
 * mail headers. If you do not want your IP known, you should set up a mail relay
 * to strip the relevant headers.
 */
mail
{
	/*
	 * If set, this option enables the mail commands in Services. You may choose
	 * to disable it if you have no Sendmail-compatible mailer installed. Whilst
	 * this directive (and entire block) is optional, it is required if
	 * nickserv:registration is set to yes.
	 */
	usemail = yes
 
	/*
	 * This is the command-line that will be used to call the mailer to send an
	 * e-mail. It must be called with all the parameters needed to make it
	 * scan the mail input to find the mail recipient; consult your mailer
	 * documentation.
	 *
	 * Postfix users must use the compatible sendmail utility provided with
	 * it. This one usually needs no parameters on the command-line. Most
	 * sendmail applications (or replacements of it) require the -t option
	 * to be used.
	 */
	sendmailpath = "/usr/sbin/sendmail -t"
 
	/*
	 * This is the e-mail address from which all the e-mails are to be sent from.
	 * It should really exist.
	 */
	sendfrom = "services@localhost.net"
 
	/*
	 * This controls the minimum amount of time a user must wait before sending
	 * another e-mail after they have sent one. It also controls the minimum time
	 * a user must wait before they can receive another e-mail.
	 *
	 * This feature prevents users from being mail bombed using Services and
	 * it is highly recommended that it be used.
	 *
	 * This directive is optional, but highly recommended.
	 */
	delay = 5m
 
	/*
	 * If set, Services will not attempt to put quotes around the TO: fields
	 * in e-mails.
	 *
	 * This directive is optional, and as far as we know, it's only needed
	 * if you are using ESMTP or QMail to send out e-mails.
	 */
	#dontquoteaddresses = yes
 
	/*
	 * The subject and message of emails sent to users when they register accounts.
	 */
	registration_subject = "Nickname registration for %n"
	registration_message = "Hi,
 
				You have requested to register the nickname %n on %N.
				Please type \" /msg NickServ CONFIRM %c \" to complete registration.
 
				If you don't know why this mail was sent to you, please ignore it silently.
 
				%N administrators."
 
	/*
	 * The subject and message of emails sent to users when they request a new password.
	 */
	reset_subject = "Reset password request for %n"
	reset_message = "Hi,
 
			You have requested to have the password for %n reset.
			To reset your password, type \" /msg NickServ CONFIRM %n %c \"
 
			If you don't know why this mail was sent to you, please ignore it silently.
 
			%N administrators."
 
	/*
	 * The subject and message of emails sent to users when they request a new email address.
	 */
	emailchange_subject = "Email confirmation"
	emailchange_message = "Hi,
 
			You have requested to change your email address to %e.
			Please type \" /msg NickServ CONFIRM %c \" to confirm this change.
 
			If you don't know why this mail was sent to you, please ignore it silently.
 
			%N administrators."
 
	/*
	 * The subject and message of emails sent to users when they receive a new memo.
	 */
	memo_subject = "New memo"
	memo_message = "Hi %n,
 
			You've just received a new memo from %s. This is memo number %d.
 
			Memo text:
 
			%t"
}
 
/*
 * [REQUIRED] Database configuration.
 *
 * This section is used to configure databases used by Anope.
 * You should at least load one database method, otherwise any data you
 * have will not be stored!
 */
 
/*
 * [DEPRECATED] db_old
 *
 * This is the old binary database format from late Anope 1.7.x, Anope 1.8.x, and
 * early Anope 1.9.x. This module only loads these databases, and will NOT save them.
 * You should only use this to upgrade old databases to a newer database format by loading
 * other database modules in addition to this one, which will be used when saving databases.
 */
#module
{
	name = "db_old"
 
	/*
	 * This is the encryption type used by the databases. This must be set correctly or
	 * your passwords will not work. Valid options are: md5, oldmd5, sha1, and plain.
	 * You must also be sure to load the correct encryption module below in the Encryption
	 * Modules section so that your passwords work.
	 */
	#hash = "md5"
}
 
/*
 * [RECOMMENDED] db_flatfile
 *
 * This is the default flatfile database format.
 */
module
{
	name = "db_flatfile"
 
	/*
	 * The database name db_flatfile should use
	 */
	database = "anope.db"
 
	/*
	 * Sets the number of days backups of databases are kept. If you don't give it,
	 * or if you set it to 0, Services won't backup the databases.
	 *
	 * NOTE: Services must run 24 hours a day for this feature to work.
	 *
	 * This directive is optional, but recommended.
	 */
	keepbackups = 3
 
	/*
	 * Allows Services to continue file write operations (i.e. database saving)
	 * even if the original file cannot be backed up. Enabling this option may
	 * allow Services to continue operation under conditions where it might
	 * otherwise fail, such as a nearly-full disk.
	 *
	 * NOTE: Enabling this option can cause irrecoverable data loss under some
	 * conditions, so make CERTAIN you know what you're doing when you enable it!
	 *
	 * This directive is optional, and you are discouraged against enabling it.
	 */
	#nobackupokay = yes
 
	/*
	 * If enabled, services will fork a child process to save databases.
	 *
	 * This is only useful with very large databases, with hundreds
	 * of thousands of objects, that have a noticeable delay from
	 * writing databases.
	 *
	 * If your database is large enough cause a noticeable delay when
	 * saving you should consider a more powerful alternative such
	 * as db_sql or db_redis, which incrementally update their
	 * databases asynchronously in real time.
	 */
	fork = no
}
 
/*
 * db_sql and db_sql_live
 *
 * db_sql module allows saving and loading databases using one of the SQL engines.
 * This module loads the databases once on startup, then incrementally updates
 * objects in the database as they are changed within Anope in real time. Changes
 * to the SQL tables not done by Anope will have no effect and will be overwritten.
 *
 * db_sql_live module allows saving and loading databases using one of the SQL engines.
 * This module reads and writes to SQL in real time. Changes to the SQL tables
 * will be immediately reflected into Anope. This module should not be loaded
 * in conjunction with db_sql.
 *
 */
#module
{
	name = "db_sql"
	#name = "db_sql_live"
 
	/*
	 * The SQL service db_sql(_live) should use, these are configured in modules.conf.
	 * For MySQL, this should probably be mysql/main.
	 */
	engine = "sqlite/main"
 
	/*
	 * An optional prefix to prepended to the name of each created table.
	 * Do not use the same prefix for other programs.
	 */
	#prefix = "anope_db_"
 
	/* Whether or not to import data from another database module in to SQL on startup.
	 * If you enable this, be sure that the database services is configured to use is
	 * empty and that another database module to import from is loaded before db_sql.
	 * After you enable this and do a database import you should disable it for
	 * subsequent restarts.
	 *
	 * Note that you can not import databases using db_sql_live. If you want to import
	 * databases and use db_sql_live you should import them using db_sql, then shut down
	 * and start services with db_sql_live.
	 */
	import = false
}
 
/*
 * db_redis.
 *
 * This module allows using Redis (http://redis.io) as a database backend.
 * This module requires that m_redis is loaded and configured properly.
 *
 * Redis 2.8 supports keyspace notifications which allows Redis to push notifications
 * to Anope about outside modifications to the database. This module supports this and
 * will internally reflect any changes made to the database immediately once notified.
 * See docs/REDIS for more information regarding this.
 */
#module
{
	name = "db_redis"
 
	/*
	 * Redis database to use. This must be configured with m_redis.
	 */
	engine = "redis/main"
}
 
/*
 * [RECOMMENDED] Encryption modules.
 *
 * The encryption modules are used when dealing with passwords. This determines how
 * the passwords are stored in the databases, and does not add any security as
 * far as transmitting passwords over the network goes.
 *
 * Without any encryption modules loaded users will not be able to authenticate unless
 * there is another module loaded that provides authentication checking, such as
 * m_ldap_authentication or m_sql_authentication.
 *
 * With enc_none, passwords will be stored in plain text, allowing for passwords
 * to be recovered later but it isn't secure and therefore is not recommended.
 *
 * The other encryption modules use one-way encryption, so the passwords can not
 * be recovered later if those are used.
 *
 * The first encryption module loaded is the primary encryption module. All new passwords are
 * encrypted by this module. Old passwords stored in another encryption method are
 * automatically re-encrypted by the primary encryption module on next identify.
 *
 * NOTE: enc_old is Anope's previous (broken) MD5 implementation which is present in
 * versions prior to Anope 1.7.17. If your databases were made using that module,
 * use this and not enc_md5.
 *
 * NOTE: enc_sha1 relies on how the OS stores 2+ byte data internally, and is
 * potentially broken when moving between 2 different OSes, such as moving from
 * Linux to Windows. It is recommended that you use enc_sha256 instead if you want
 * to use an SHA-based encryption. If you choose to do so, it is also recommended
 * that you first try to get everyone's passwords converted to enc_sha256 before
 * switching OSes by placing enc_sha256 at the beginning of the list.
 *
 */
 
#module { name = "enc_bcrypt" }
module { name = "enc_sha256" }
#module { name = "enc_md5" }
#module { name = "enc_sha1" }
 
/*
 * When using enc_none, passwords will be stored without encryption. This isn't secure
 * therefore it is not recommended.
 */
#module { name = "enc_none" }
 
/*
 * enc_old is Anope's previous (broken) MD5 implementation used from 1.4.x to 1.7.16.
 * If your databases were made using that module, load it here to allow conversion to the primary
 * encryption method.
 */
#module { name = "enc_old" }
 
 
/* Extra (optional) modules. */
include
{
	type = "file"
	name = "modules.example.conf"
}
 
/*
 * Chanstats module.
 * Requires a MySQL Database.
 */
#include
{
	type = "file"
	name = "chanstats.example.conf"
}
 
/*
 * IRC2SQL Gateway
 * This module collects data about users, channels and servers. It doesn't build stats
 * itself, however, it gives you the database, it's up to you how you use it.
 *
 * Requires a MySQL Database and MySQL version 5.5 or higher
 */
#include
{
	type = "file"
	name = "irc2sql.example.conf"
}

Services Configuration

=== NickServ ===
 
<div class="code">
<syntaxhighlight lang="cpp">
/*
 * Example configuration file for NickServ.
 */
 
/*
 * First, create the service.
 */
service
{
	/*
	 * The name of the NickServ client.
	 * If you change this value, you probably want to change the client directive in the configuration for the nickserv module too.
	 */
	nick = "NickServ"
 
	/*
	 * The username of the NickServ client.
	 */
	user = "services"
 
	/*
	 * The hostname of the NickServ client.
	 */
	host = "services.host"
 
	/*
	 * The realname of the NickServ client.
	 */
	gecos = "Nickname Registration Service"
 
	/*
	 * The modes this client should use.
	 * Do not modify this unless you know what you are doing.
	 *
	 * These modes are very IRCd specific. If left commented, sane defaults
	 * are used based on what protocol module you have loaded.
	 *
	 * Note that setting this option incorrectly could potentially BREAK some, if
	 * not all, usefulness of the client. We will not support you if this client is
	 * unable to do certain things if this option is enabled.
	 */
	#modes = "+o"
 
	/*
	 * An optional comma separated list of channels this service should join. Outside
	 * of log channels this is not very useful, as the service will just idle in the
	 * specified channels, and will not accept any types of commands.
	 *
	 * Prefixes may be given to the channels in the form of mode characters or prefix symbols.
	 */
	#channels = "@#services,#mychan"
}
 
/*
 * Core NickServ module.
 *
 * Provides essential functionality for NickServ.
 */
module
{
	name = "nickserv"
 
	/*
	 * The name of the client that should be NickServ.
	 */
	client = "NickServ"
 
	/*
	 * Force users to give an e-mail address when they register a nick.
	 *
	 * This directive defaults to "yes" and is recommended to be enabled. This is required if e-mail registration is enabled.
	 */
	forceemail = yes
 
	/*
	 * Require users who change their email address to confirm they
	 * own their new email.
	 */
	confirmemailchanges = no
 
	/*
	 * A message sent to users on connect if they use an unregistered nick.
	 *
	 * This directive is optional.
	 */
	#unregistered_notice = "Your nickname is not registered. To register it, use: /msg NickServ REGISTER password email"
 
	/*
	 * The default options for newly registered nicks. Note that changing these options
	 * will have no effect on nicks which are already registered. The list must be separated
	 * by spaces.
	 *
	 * The options are:
	 * -   killprotect: Kill nick if not identified within 60 seconds
	 * -    kill_quick: Kill nick if not identified within 20 seconds, this one overrides the above
	 *                    option and the above must be specified with this one
	 * -     ns_secure: Enable nickname security, requiring the nick's password before any operations
	 *                    can be done on it
	 * -    ns_private: Hide the nick from NickServ's LIST command
	 * -    hide_email: Hide's the nick's e-mail address from NickServ's INFO command
	 * -     hide_mask: Hide's the nick's last or current user@host from NickServ's INFO command
	 * -     hide_quit: Hide's the nick's last quit message
	 * -   memo_signon: Notify user if they have a new memo when they sign into the nick
	 * -  memo_receive: Notify user if they have a new memo as soon as it's received
	 * -     memo_mail: Notify user if they have a new memo by mail
	 * -        autoop: User will be automatically opped in channels they enter and have access to
	 * -           msg: Services messages will be sent as PRIVMSGs instead of NOTICEs, requires
	 *                    options:useprivmsg to be enabled as well
	 * -  ns_keepmodes: Enables keepmodes, which retains user modes across sessions
	 *
	 * This directive is optional, if left blank, the options will default to ns_secure, memo_signon, and
	 * memo_receive. If you really want no defaults, use "none" by itself as the option.
	 */
	defaults = "ns_secure ns_private hide_email hide_mask memo_signon memo_receive autoop"
 
	/*
	 * The minimum length of time between consecutive uses of NickServ's REGISTER command. This
	 * directive is optional, but recommended. If not set, this restriction will be disabled.
	 */
	regdelay = 30s
 
	/*
	 * The length of time before a nick's registration expires.
	 *
	 * This directive is optional, but recommended. If not set, the default is 21 days.
	 */
	expire = 21d
 
	/*
	 * Prevents the use of the ACCESS and CERT (excluding their LIST subcommand), DROP, FORBID, SUSPEND,
	 * GETPASS and SET PASSWORD commands by services operators on other services operators.
	 *
	 * This directive is optional, but recommended.
	 */
	secureadmins = yes
 
	/*
	 * If set, Services will set the channel modes a user has access to upon identifying, assuming
	 * they are not already set.
	 *
	 * This directive is optional.
	 */
	modeonid = yes
 
	/*
	 * If set, Services will set these user modes on any user who identifies.
	 *
	 * This directive is optional.
	 */
	#modesonid = "+R"
 
	/*
	 * If set, Services will not show netsplits in the last quit message field
	 * of NickServ's INFO command.
	 */
	hidenetsplitquit = no
 
	/*
	 * If set, is the length of time NickServ's killquick and kill options wait before
	 * forcing users off of protected nicknames.
	 */
	killquick = 20s
	kill = 60s
 
	/*
	 * If set, forbids the registration of nicks that contain an existing
	 * nick with Services access. For example, if Tester is a Services Oper,
	 * you can't register NewTester or Tester123 unless you are an IRC
	 * Operator.
	 *
	 * NOTE: If you enable this, you will have to be logged in as an IRC
	 * operator in order to register a Services Root nick when setting up
	 * Anope for the first time.
	 *
	 * This directive is optional.
	 */
	#restrictopernicks = yes
 
	/*
	 * The username, and possibly hostname, used for fake users created when Services needs to
	 * hold a nickname.
	 */
	enforceruser = "enforcer"
	enforcerhost = "services.host"
 
	/*
	 * The length of time Services hold nicknames.
	 *
	 * This directive is optional, but recommended. If not set it defaults to 1 minute.
	 */
	releasetimeout = 1m
 
	/*
	 * When a user's nick is forcibly changed to enforce a "nick kill", their new nick will start
	 * with this value. The rest will be made up of 6 or 7 digits.
	 * Make sure this is a valid nick and Nicklen+7 is not longer than the allowed Nicklen on your ircd.
	 *
	 * This directive is optional. If not set it defaults to "Guest"
	 */
	guestnickprefix = "Guest"
 
	/*
	 * If set, Services do not allow ownership of nick names, only ownership of accounts.
	 */
	nonicknameownership = no
 
	/*
	 * The maximum length of passwords
	 *
	 * This directive is optional. If not set it defaults to 32.
	 */
	passlen = 32
}
 
/*
 * Core NickServ commands.
 *
 * In Anope modules can provide (multiple) commands, each of which has a unique command name. Once these modules
 * are loaded you can then configure the commands to be added to any client you like with any name you like.
 *
 * Additionally, you may provide a permission name that must be in the opertype of users executing the command.
 *
 * Sane defaults are provided below that do not need to be edited unless you wish to change the default behavior.
 */
 
/* Command group configuration for NickServ.
 *
 * Commands may optionally be placed into groups to make NickServ's HELP output easier to understand.
 * Remove the following groups to use the old behavior of simply listing all NickServ commands from HELP.
 */
command_group
{
	name = "nickserv/admin"
	description = _("Services Operator commands")
}
 
/* Give it a help command. */
command { service = "NickServ"; name = "HELP"; command = "generic/help"; }
 
/*
 * ns_access
 *
 * Provides the command nickserv/access.
 *
 * Used for configuring what hosts have access to your account.
 */
module
{
	name = "ns_access"
 
	/*
	 * The maximum number of entries allowed on a nickname's access list.
	 * If not set, the default is 32. This number cannot be set to 0.
	 */
	accessmax = 32
 
	/*
	 * If set, Services will add the usermask of registering users to the access list of their
	 * newly created account. If not set, users will always have to identify to NickServ before
	 * being recognized, unless they manually add an address to the access list of their account.
	 * This directive is optional.
	 */
	addaccessonreg = yes
}
command { service = "NickServ"; name = "ACCESS"; command = "nickserv/access"; }
 
/*
 * ns_ajoin
 *
 * Provides the command nickserv/ajoin.
 *
 * Used for configuring channels to join once you identify.
 */
module
{
	name = "ns_ajoin"
 
	/*
	 * The maximum number of channels a user can have on NickServ's AJOIN command.
	 */
	ajoinmax = 10
}
command { service = "NickServ"; name = "AJOIN"; command = "nickserv/ajoin"; }
 
/*
 * ns_alist
 *
 * Provides the command nickserv/alist.
 *
 * Used for viewing what channels you have access to.
 */
module { name = "ns_alist" }
command { service = "NickServ"; name = "ALIST"; command = "nickserv/alist"; }
 
/*
 * ns_cert
 *
 * Provides the command nickserv/cert.
 *
 * Used for configuring your SSL certificate list, which can be used to automatically identify you.
 */
module
{
	name = "ns_cert"
 
	/*
	 * The maximum number of entries allowed on a nickname's certificate fingerprint list.
	 * The default is 5. This number cannot be set to 0.
	 */
	max = 5
}
command { service = "NickServ"; name = "CERT"; command = "nickserv/cert"; }
 
/*
 * ns_drop
 *
 * Provides the command nickserv/drop.
 *
 * Used for unregistering names.
 */
module { name = "ns_drop" }
command { service = "NickServ"; name = "DROP"; command = "nickserv/drop"; }
 
/*
 * ns_getemail
 *
 * Provides the command nickserv/getemail.
 *
 * Used for getting registered accounts by searching for emails.
 */
module { name = "ns_getemail" }
command { service = "NickServ"; name = "GETEMAIL"; command = "nickserv/getemail"; permission = "nickserv/getemail"; group = "nickserv/admin"; }
 
/*
 * ns_getpass
 *
 * Provides the command nickserv/getpass.
 *
 * Used for getting users passwords.
 *
 * Requires no encryption is being used.
 */
#module { name = "ns_getpass" }
#command { service = "NickServ"; name = "GETPASS"; command = "nickserv/getpass"; permission = "nickserv/getpass"; }
 
/*
 * ns_group
 *
 * Provides the commands nickserv/group, nickserv/glist, and nickserv/ungroup.
 *
 * Used for controlling nick groups.
 */
module
{
	name = "ns_group"
 
	/*
	 * The maximum number of nicks allowed in a group.
	 *
	 * This directive is optional, but recommended. If not set or set to 0, no limits will be applied.
	 */
	maxaliases = 16
 
	/*
	 * If set, the NickServ GROUP command won't allow any group changes. This is recommended to
	 * prevent users from accidentally dropping their nicks, as it forces users to explicitly
	 * drop their nicks before adding it to another group.
	 *
	 * This directive is optional, but recommended.
	 */
	nogroupchange = yes
}
command { service = "NickServ"; name = "GLIST"; command = "nickserv/glist"; }
command { service = "NickServ"; name = "GROUP"; command = "nickserv/group"; }
command { service = "NickServ"; name = "UNGROUP"; command = "nickserv/ungroup"; }
 
/*
 * ns_identify
 *
 * Provides the command nickserv/identify.
 *
 * Used for identifying to accounts.
 */
module { name = "ns_identify" }
command { service = "NickServ"; name = "ID"; command = "nickserv/identify"; hide = true; }
command { service = "NickServ"; name = "IDENTIFY"; command = "nickserv/identify"; }
 
/*
 * ns_info
 *
 * Provides the commands:
 * nickserv/info. - Used for gathering information about an account.
 * nickserv/set/hide, nickserv/saset/hide - Used for configuring which options are publically shown in nickserv/info.
 *
 */
module { name = "ns_info" }
command { service = "NickServ"; name = "INFO"; command = "nickserv/info"; }
 
command { service = "NickServ"; name = "SET HIDE"; command = "nickserv/set/hide"; }
command { service = "NickServ"; name = "SASET HIDE"; command = "nickserv/saset/hide"; permission = "nickserv/saset/hide"; }
 
 
/*
 * ns_list
 *
 * Provides the commands:
 *   nickserv/list - Used for retrieving and searching the registered account list.
 *   nickserv/set/private, nickserv/saset/private - Used for configuring whether or a users account shows up in nickserv/list.
 *
 */
module
{
	name = "ns_list"
 
	/*
	 * The maximum number of nicks to be returned for a NickServ LIST command.
	 */
	listmax = 50
}
command { service = "NickServ"; name = "LIST"; command = "nickserv/list"; }
 
command { service = "NickServ"; name = "SET PRIVATE"; command = "nickserv/set/private"; }
command { service = "NickServ"; name = "SASET PRIVATE"; command = "nickserv/saset/private"; permission = "nickserv/saset/private"; }
 
 
/*
 * ns_logout
 *
 * Provides the command nickserv/logout.
 *
 * Used for logging out of your account.
 */
module { name = "ns_logout" }
command { service = "NickServ"; name = "LOGOUT"; command = "nickserv/logout"; }
 
/*
 * ns_recover
 *
 * Provides the command nickserv/recover.
 *
 * Used for recovering your nick from services or another user.
 */
module
{
	name = "ns_recover"
 
	/*
	 * If set, Services will svsnick and svsjoin users who use the recover
	 * command on an identified user to the nick and channels of the recovered user.
	 *
	 * This directive is opional.
	 */
	restoreonrecover = yes
}
command { service = "NickServ"; name = "RECOVER"; command = "nickserv/recover"; }
# Uncomment below to emulate 1.8's behavior of ghost and release.
#command { service = "NickServ"; name = "GHOST"; command = "nickserv/recover"; }
#command { service = "NickServ"; name = "RELEASE"; command = "nickserv/recover"; }
 
/*
 * ns_register
 *
 * Provides the commands nickserv/confirm, nickserv/register, and nickserv/resend.
 *
 * Used for registering accounts.
 */
module
{
	name = "ns_register"
 
	/*
	 * Registration confirmation setting. Set to "none" for no registration confirmation,
	 * "mail" for email confirmation, and "admin" to have services operators manually confirm
	 * every registration. Set to "disable" to completely disable all registrations.
	 */
	registration = "none"
 
	/*
	 * The minimum length of time between consecutive uses of NickServ's RESEND command.
	 *
	 * This directive is optional, but recommended. If not set, this restriction will be disabled.
	 */
	resenddelay = 90s
 
	/*
	 * Prevents users from registering their nick if they are not connected
	 * for at least the given number of seconds.
	 *
	 * This directive is optional.
	 */
	#nickregdelay = 30s
 
	/*
	 * The length of time a user using an unconfirmed account has
	 * before the account will be released for general use again.
	 */
	#unconfirmedexpire = 1d
}
command { service = "NickServ"; name = "CONFIRM"; command = "nickserv/confirm"; }
command { service = "NickServ"; name = "REGISTER"; command = "nickserv/register"; }
command { service = "NickServ"; name = "RESEND"; command = "nickserv/resend"; }
 
/*
 * ns_resetpass
 *
 * Provides the command nickserv/resetpass.
 *
 * Used for resetting passwords by emailing users a temporary one.
 */
module { name = "ns_resetpass" }
command { service = "NickServ"; name = "RESETPASS"; command = "nickserv/resetpass"; }
 
/*
 * ns_set
 *
 * Provides the commands:
 *   nickserv/set, nickserv/saset - Dummy help wrappers for the SET and SASET commands.
 *   nickserv/set/autoop, nickserv/saset/autoop - Determines whether or not modes are automatically set users when joining a channel.
 *   nickserv/set/display, nickserv/saset/display - Used for setting a users display name.
 *   nickserv/set/email, nickserv/saset/email - Used for setting a users email address.
 *   nickserv/set/keepmodes, nickserv/saset/keepmodes - Configure whether or not services should retain a user's modes across sessions.
 *   nickserv/set/kill, nickserv/saset/kill - Used for configuring nickname protection.
 *   nickserv/set/language, nickserv/saset/language - Used for configuring what language services use.
 *   nickserv/set/message, nickserv/saset/message - Used to configure how services send messages to you.
 *   nickserv/set/password, nickserv/saset/password  - Used for changing a users password.
 *   nickserv/set/secure, nickserv/saset/secure - Used for configuring whether a user can identify by simply being recognized by nickserv/access.
 *   nickserv/saset/noexpire - Used for configuring noexpire, which prevents nicks from expiring.
 */
module
{
	name = "ns_set"
 
	/*
	 * Allow the use of the IMMED option in the NickServ SET KILL command.
	 *
	 * This directive is optional.
	 */
	#allowkillimmed = yes
}
 
command { service = "NickServ"; name = "SET"; command = "nickserv/set"; }
command { service = "NickServ"; name = "SASET"; command = "nickserv/saset"; permission = "nickserv/saset/"; group = "nickserv/admin"; }
 
command { service = "NickServ"; name = "SET AUTOOP"; command = "nickserv/set/autoop"; }
command { service = "NickServ"; name = "SASET AUTOOP"; command = "nickserv/saset/autoop"; permission = "nickserv/saset/autoop"; }
 
command { service = "NickServ"; name = "SET DISPLAY"; command = "nickserv/set/display"; }
command { service = "NickServ"; name = "SASET DISPLAY"; command = "nickserv/saset/display"; permission = "nickserv/saset/display"; }
 
command { service = "NickServ"; name = "SET EMAIL"; command = "nickserv/set/email"; }
command { service = "NickServ"; name = "SASET EMAIL"; command = "nickserv/saset/email"; permission = "nickserv/saset/email"; }
 
command { service = "NickServ"; name = "SET KEEPMODES"; command = "nickserv/set/keepmodes"; }
command { service = "NickServ"; name = "SASET KEEPMODES"; command = "nickserv/saset/keepmodes"; permission = "nickserv/saset/keepmodes"; }
 
command { service = "NickServ"; name = "SET KILL"; command = "nickserv/set/kill"; }
command { service = "NickServ"; name = "SASET KILL"; command = "nickserv/saset/kill"; permission = "nickserv/saset/kill"; }
 
command { service = "NickServ"; name = "SET LANGUAGE"; command = "nickserv/set/language"; }
command { service = "NickServ"; name = "SASET LANGUAGE"; command = "nickserv/saset/language"; permission = "nickserv/saset/language"; }
 
command { service = "NickServ"; name = "SET MESSAGE"; command = "nickserv/set/message"; }
command { service = "NickServ"; name = "SASET MESSAGE"; command = "nickserv/saset/message"; permission = "nickserv/saset/message"; }
 
command { service = "NickServ"; name = "SET PASSWORD"; command = "nickserv/set/password"; }
command { service = "NickServ"; name = "SASET PASSWORD"; command = "nickserv/saset/password"; permission = "nickserv/saset/password"; }
 
command { service = "NickServ"; name = "SET SECURE"; command = "nickserv/set/secure"; }
command { service = "NickServ"; name = "SASET SECURE"; command = "nickserv/saset/secure"; permission = "nickserv/saset/secure"; }
 
command { service = "NickServ"; name = "SASET NOEXPIRE"; command = "nickserv/saset/noexpire"; permission = "nickserv/saset/noexpire"; }
 
 
/*
 * ns_set_misc
 *
 * Provides the command nickserv/set/misc.
 *
 * Allows you to create arbitrary commands to set data, and have that data show up in nickserv/info.
 * A field named misc_description may be given for use with help output.
 */
module { name = "ns_set_misc" }
command { service = "NickServ"; name = "SET URL"; command = "nickserv/set/misc"; misc_description = _("Associate a URL with your account"); }
command { service = "NickServ"; name = "SASET URL"; command = "nickserv/saset/misc"; misc_description = _("Associate a URL with this account"); permission = "nickserv/saset/url"; group = "nickserv/admin"; }
#command { service = "NickServ"; name = "SET ICQ"; command = "nickserv/set/misc"; misc_description = _("Associate an ICQ account with your account"); }
#command { service = "NickServ"; name = "SASET ICQ"; command = "nickserv/saset/misc"; misc_description = _("Associate an ICQ account with this account"); permission = "nickserv/saset/icq"; group = "nickserv/admin"; }
#command { service = "NickServ"; name = "SET TWITTER"; command = "nickserv/set/misc"; misc_description = _("Associate a Twitter account with your account"); }
#command { service = "NickServ"; name = "SASET TWITTER"; command = "nickserv/saset/misc"; misc_description = _("Associate a Twitter account with this account"); permission = "nickserv/saset/twitter"; group = "nickserv/admin"; }
#command { service = "NickServ"; name = "SET FACEBOOK"; command = "nickserv/set/misc"; misc_description = _("Associate a Facebook URL with your account"); }
#command { service = "NickServ"; name = "SASET FACEBOOK"; command = "nickserv/saset/misc"; misc_description = _("Associate a Facebook URL with this account"); permission = "nickserv/saset/facebook"; group = "nickserv/admin"; }
 
/*
 * ns_status
 *
 * Provides the nickserv/status command.
 *
 * Used to determine if a user is recognized or identified by services.
 */
module { name = "ns_status" }
command { service = "NickServ"; name = "STATUS"; command = "nickserv/status"; }
 
/*
 * ns_suspend
 *
 * Provides the commands nickserv/suspend and nickserv/unsuspend.
 *
 * Used to suspend and unsuspend nicknames. Suspended nicknames can not be used but their settings are preserved.
 */
module
{
	name = "ns_suspend"
 
	/*
	 * The length of time before a suspended nick becomes unsuspended.
	 *
	 * This directive is optional. If not set, the default is never.
	 */
	#suspendexpire = 90d
 
	/*
	 * Settings to show to non-opers in NickServ's INFO output.
	 * Comment to completely disable showing any information about
	 * suspended nicknames to non-opers.
	 */
	show = "suspended, by, reason, on, expires"
}
command { service = "NickServ"; name = "SUSPEND"; command = "nickserv/suspend"; permission = "nickserv/suspend"; group = "nickserv/admin"; }
command { service = "NickServ"; name = "UNSUSPEND"; command = "nickserv/unsuspend"; permission = "nickserv/suspend"; group = "nickserv/admin"; }
 
/*
 * ns_update
 *
 * Provides the command nickserv/update.
 *
 * Used to update your status on all channels, turn on your vHost, etc.
 */
module { name = "ns_update" }
command { service = "NickServ"; name = "UPDATE"; command = "nickserv/update"; }
 
 
/*
 * Extra NickServ related modules.
 */
 
/*
 * ns_maxemail
 *
 * Limits how many times the same email address may be used in Anope
 * to register accounts.
 */
#module
{
	name = "ns_maxemail"
 
	/*
	 * The limit to how many registered nicks can use the same e-mail address. If set to 0 or left
	 * commented, there will be no limit enforced when registering new accounts or using
	 * /msg NickServ SET EMAIL.
	 */
	maxemails = 1
}


ChanServ

/*
 * Example configuration file for ChanServ.
 */
 
/*
 * First, create the service.
 */
service
{
	/*
	 * The name of the ChanServ client.
	 * If you change this value, you probably want to change the client directive in the configuration for the chanserv module too.
	 */
	nick = "ChanServ"
 
	/*
	 * The username of the ChanServ client.
	 */
	user = "services"
 
	/*
	 * The hostname of the ChanServ client.
	 */
	host = "services.host"
 
	/*
	 * The realname of the ChanServ client.
	 */
	gecos = "Channel Registration Service"
 
	/*
	 * The modes this client should use.
	 * Do not modify this unless you know what you are doing.
	 *
	 * These modes are very IRCd specific. If left commented, sane defaults
	 * are used based on what protocol module you have loaded.
	 *
	 * Note that setting this option incorrectly could potentially BREAK some, if
	 * not all, usefulness of the client. We will not support you if this client is
	 * unable to do certain things if this option is enabled.
	 */
	#modes = "+o"
 
	/*
	 * An optional comma separated list of channels this service should join. Outside
	 * of log channels this is not very useful, as the service will just idle in the
	 * specified channels, and will not accept any types of commands.
	 *
	 * Prefixes may be given to the channels in the form of mode characters or prefix symbols.
	 */
	#channels = "@#services,#mychan"
}
 
/*
 * Core ChanServ module.
 *
 * Provides essential functionality for ChanServ.
 */
module
{
	name = "chanserv"
 
	/*
	 * The name of the client that should be ChanServ.
	 */
	client = "ChanServ"
 
	/*
	 * The default options for newly registered channels. Note that changing these options
	 * will have no effect on channels which are already registered. The list must be separated
	 * by spaces.
	 *
	 * The options are:
	 * -      keeptopic: Retain topic when the channel is not in use
	 * -          peace: Disallow users from kicking or removing modes from others who are of the same
	 *                     access level or superior
	 * -     cs_private: Hide the channel from ChanServ's LIST command
	 * -     restricted: Kick/ban users who are restricted from the channel
	 * -      cs_secure: Enable channel security, requiring the user to be identified with NickServ in
	 *                     order to be considered for being on the access list of the channel
	 * -      secureops: Only allow operator status to be given if the user is on the access list
	 * -  securefounder: Only allow the real founder of the channel to drop the channel, change it's
	 *                     password, or change the founder or successor
	 * -       signkick: Use of ChanServ's KICK command will cause the user's nick to be signed to the kick.
	 * - signkick_level: Same as above, but the kick will not be signed if the user is at the same access
	 *                     level or superior to the target
	 * -      topiclock: Disallow the topic to be changed except with ChanServ's TOPIC command
	 * -        persist: Keep the channel open at all times
	 * -       noautoop: Disables autoop on the channel
	 * -  cs_keep_modes: Enables keep modes on the channel, which retains modes when the channel is
	 *                     not in use.
	 * -           none: No defaults
	 *
	 * This directive is optional, if left blank, the options will default to keeptopic, cs_secure, securefounder,
	 * and signkick. If you really want no defaults, use "none" by itself as the option.
	 */
	defaults = "keeptopic peace cs_secure securefounder signkick"
 
	/*
	 * The maximum number of channels which may be registered to a single nickname.
	 *
	 * This directive is optional, but recommended.
	 * If not set, there will be no restriction on the numbers of channels a single nickname can have registered.
	 */
	maxregistered = 20
 
	/*
	 * The length of time before a channel registration expires.
	 *
	 * This directive is optional, but recommended.
	 * If not set, the default is 14 days.
	 */
	expire = 14d
 
	/*
	 * The maximum number of entries on a channel's access list.
	 * If not set, the default is 1024. This can be set to 0 for unlimited.
	 */
	accessmax = 1024
 
	/*
	 * The length of time ChanServ stays in a channel after kicking a user from a channel they are not
	 * permitted to be in. This only occurs when the user is the only one in the channel.
	 */
	inhabit = 15s
 
	/*
	 * Allow only IRC Operators to use ChanServ.
	 *
	 * This directive is optional.
	 */
	#opersonly = yes
 
	/*
	 * Modes that will not be allowed to be locked. Oper only modes such as +O
	 * are always restricted from regular users and are not affected by this.
	 * Comment out for no restrictions.
	 */
	#nomlock = "P"
 
	/*
	 * Modes that are required to be set and only set on all registered channels.
	 * These modes can not be locked or unlocked. The registered channel mode is
	 * automatically always required, if such a mode exists.
	 */
	#require = "r"
 
	/*
	 * The maximum length of the reason field for user commands such as chanserv/kick
	 * and chanserv/ban.
	 */
	reasonmax = 200
 
	/*
	 * If set, prevents channel access entries from containing hostmasks.
	 */
	disallow_hostmask_access = false
 
	/*
	 * If set, prevents channels from being on access lists.
	 */
	disallow_channel_access = false
 
	/*
	 * If set, ChanServ will always lower the timestamp of registered channels to their registration date.
	 * This prevents several race conditions where unauthorized users can join empty registered channels and set
	 * modes etc. prior to services deopping them.
	 */
	always_lower_ts = false
}
 
/*
 * ChanServ privilege configuration.
 *
 * ChanServ privileges are used to determine who has what access in channels. By default the core has its own
 * set of privileges it uses for various commands, which are defined below. Privilege ranks are used to
 * determine how powerful privileges are relative to other privileges, which is used by Anope to determine
 * who has greater access in a channel.
 *
 * If you load cs_access, you may define a level for the privilege, which is used by chanserv/access and chanserv/levels.
 * The levels defined will be used as the default levels for newly registered channels.
 * The level "founder" is a special level which means anyone with the privilege FOUNDER on the channel
 * has that permission. Additionally, the level "disabled" means that no one can use the privilege, including founders.
 *
 * If you load cs_flags, you may define a flag associated with that privilege for use in chanserv/flags.
 *
 * If you load cs_xop, you may define a XOP command to associate the privilege with.
 *
 * The name of privileges are uesd to associate them with channel modes. If you are using an IRCd that allows you to define additional
 * channel status modes, such as InspIRCd, you can associate privileges (and thus access levels, flags, xop) with the mode by naming
 * the privileges appropriately. For example, if you had a channel mode called admin, you could create AUTOADMIN, ADMIN, and ADMINME
 * privileges which would automatically be associated with that channel mode.
 *
 * Defining new privileges here is not useful unless you have a module (eg, a third party one) made to check for
 * the specific level you are defining.
 *
 * Sane defaults are provided below that do not need to be edited unless you wish to change the default behavior.
 */
 
/*
 * ACCESS_CHANGE privilege.
 *
 * Used by chanserv/access, chanserv/flags and chanserv/xop.
 *
 * Users with this permission can modify the permissions of others.
 */
privilege
{
	name = "ACCESS_CHANGE"
	rank = 0
	level = 10
	flag = "f"
	xop = "SOP"
}
 
/*
 * ACCESS_LIST privilege.
 *
 * Used by chanserv/access, chanserv/flags, and chanserv/xop.
 *
 * Users with this permission can view the access list of channels.
 */
privilege
{
	name = "ACCESS_LIST"
	rank = 10
	level = 3
	flag = "f"
	xop = "VOP"
}
 
/*
 * AKICK privilege.
 *
 * Used by chanserv/akick and chanserv/enforce.
 *
 * Users with this permission can modify the AKICK list.
 */
privilege
{
	name = "AKICK"
	rank = 250
	level = 10
	flag = "K"
	xop = "SOP"
}
 
/*
 * ASSIGN privilege.
 *
 * Used by botserv/assign.
 *
 * Users with this permission can assign and unassign BotServ bots to and from the channel.
 */
privilege
{
	name = "ASSIGN"
	rank = 270
	level = "founder"
	flag = "s"
	xop = "QOP"
}
 
/*
 * AUTOHALFOP privilege.
 *
 * Used by the core.
 *
 * Users with this permission get halfop on join.
 */
privilege
{
	name = "AUTOHALFOP"
	rank = 100
	level = 4
	flag = "H"
	xop = "HOP"
}
 
/*
 * AUTOOP privilege.
 *
 * Used by the core.
 *
 * Users with this permission get op on join.
 */
privilege
{
	name = "AUTOOP"
	rank = 210
	level = 5
	flag = "O"
	xop = "AOP"
}
 
/*
 * AUTOOWNER privilege.
 *
 * Used by the core.
 *
 * Users with this permission get owner on join.
 */
privilege
{
	name = "AUTOOWNER"
	rank = 330
	level = 9999
	flag = "Q"
	xop = "QOP"
}
 
/*
 * AUTOPROTECT privilege.
 *
 * Used by the core.
 *
 * Users with this permission get admin on join.
 */
privilege
{
	name = "AUTOPROTECT"
	rank = 240
	level = 10
	flag = "A"
	xop = "SOP"
}
 
/*
 * AUTOVOICE privilege.
 *
 * Used by the core.
 *
 * Users with this permission get voice on join.
 */
privilege
{
	name = "AUTOVOICE"
	rank = 50
	level = 3
	flag = "V"
	xop = "VOP"
}
 
/*
 * BADWORDS privilege.
 *
 * Used by botserv/badwords.
 *
 * Users with this permission can modify BotServ's BADWORDS list.
 */
privilege
{
	name = "BADWORDS"
	rank = 260
	level = 10
	flag = "K"
	xop = "SOP"
}
 
/*
 * BAN privilege.
 *
 * Used by chanserv/ban.
 *
 * Users with this permission can use the BAN command.
 */
privilege
{
	name = "BAN"
	rank = 150
	level = 4
	flag = "b"
	xop = "HOP"
}
 
/*
 * FANTASIA privilege.
 *
 * Used by botserv/main and chanserv/xop.
 *
 * Users with this permission can use fantasy commands in the channel.
 */
privilege
{
	name = "FANTASIA"
	rank = 30
	level = 3
	flag = "c"
	xop = "VOP"
}
 
/*
 * FOUNDER privilege.
 *
 * Used by chanserv/access, chanserv/akick,
 * chanserv/drop, chanserv/set/founder,
 * chanserv/set/securefounder, chanserv/set/successor and chanserv/xop.
 *
 * Users with this permission are treated as founders and can use
 * commands restricted to founders.
 */
privilege
{
	name = "FOUNDER"
	rank = 360
	level = 10000
	flag = "F"
	xop = "QOP"
}
 
/*
 * GETKEY privilege.
 *
 * Used by chanserv/getkey and nickserv/ajoin.
 *
 * Users with this permission can get they channel key with GETKEY and
 * can use nickserv/ajoin to join channels with keys.
 */
privilege
{
	name = "GETKEY"
	rank = 180
	level = 5
	flag = "G"
	xop = "AOP"
}
 
/*
 * HALFOP privilege.
 *
 * Used by chanserv/mode, chanserv/halfop and chanserv/dehalfop.
 *
 * Users with this permission can use ChanServ to halfop and dehalfop
 * others in the channel.
 */
privilege
{
	name = "HALFOP"
	rank = 120
	level = 5
	flag = "h"
	xop = "AOP"
}
 
/*
 * HALFOPME privilege.
 *
 * Used by chanserv/mode, chanserv/halfop and chanserv/dehalfop.
 *
 * Users with this permission can use ChanServ to halfop and dehalfop
 * themselves in the channel.
 */
privilege
{
	name = "HALFOPME"
	rank = 110
	level = 4
	flag = "h"
	xop = "HOP"
}
 
/*
 * INFO privilege.
 *
 * Used by botserv/info and chanserv/info.
 *
 * Users with this permission are allowed to get the full INFO output
 * from BotServ and ChanServ.
 */
privilege
{
	name = "INFO"
	rank = 80
	level = 9999
	flag = "I"
	xop = "QOP"
}
 
/*
 * INVITE privilege.
 *
 * Used by chanserv/invite and nickserv/ajoin.
 *
 * Users with this permission can invite users through ChanServ and
 * join invite only channels with nickserv/ajoin.
 */
privilege
{
	name = "INVITE"
	rank = 190
	level = 5
	flag = "i"
	xop = "AOP"
}
 
/*
 * KICK privilege.
 *
 * Used by chanserv/kick.
 *
 * Users with this permission can use the KICK command.
 */
privilege
{
	name = "KICK"
	rank = 130
	level = 4
	flag = "k"
	xop = "HOP"
}
 
/*
 * MEMO privilege.
 *
 * Used by memoserv/del, memoserv/ignore, memoserv/info, memoserv/list,
 * memoserv/main, memoserv/read and memoserv/set.
 *
 * Users with this permission can manage channel memos.
 */
privilege
{
	name = "MEMO"
	rank = 280
	level = 10
	flag = "m"
	xop = "SOP"
}
 
/*
 * MODE privilege.
 *
 * Used by chanserv/mode.
 *
 * Users with this permission can set modes through ChanServ and change
 * the mode lock.
 */
privilege
{
	name = "MODE"
	rank = 170
	level = 9999
	flag = "s"
	xop = "QOP"
}
 
/*
 * NOKICK privilege.
 *
 * Used by botserv/kick.
 *
 * Users with this permission are spared from automated BotServ kicks.
 */
privilege
{
	name = "NOKICK"
	rank = 20
	level = 1
	flag = "N"
	xop = "VOP"
}
 
/*
 * OP privilege.
 *
 * Used by chanserv/mode, chanserv/modes.
 *
 * Users with this permission can use ChanServ to op and deop
 * others in the channel.
 */
privilege
{
	name = "OP"
	rank = 230
	level = 5
	flag = "o"
	xop = "SOP"
}
 
/*
 * OPME privilege.
 *
 * Used by chanserv/mode, chanserv/modes.
 *
 * Users with this permission can use ChanServ to op and deop
 * themselves in the channel.
 */
privilege
{
	name = "OPME"
	rank = 220
	level = 5
	flag = "o"
	xop = "AOP"
}
 
/*
 * OWNER privilege.
 *
 * Used by chanserv/mode and chanserv/modes.
 *
 * Users with this permission can use ChanServ to owner and deowner
 * others in the channel.
 */
privilege
{
	name = "OWNER"
	rank = 350
	level = "founder"
	flag = "q"
	xop = "QOP"
}
 
/*
 * OWNERME privilege.
 *
 * Used by chanserv/mode and chanserv/modes.
 *
 * Users with this permission can use ChanServ to owner and deowner
 * themselves in the channel.
 */
privilege
{
	name = "OWNERME"
	rank = 340
	level = 9999
	flag = "q"
	xop = "QOP"
}
 
/*
 * PROTECT privilege.
 *
 * Used by chanserv/mode and chanserv/modes.
 *
 * Users with this permission can use ChanServ to protect and deprotect
 * others in the channel.
 */
privilege
{
	name = "PROTECT"
	rank = 310
	level = 9999
	flag = "a"
	xop = "QOP"
}
 
/*
 * PROTECTME privilege.
 *
 * Used by chanserv/mode and chanserv/modes.
 *
 * Users with this permission can use ChanServ to protect and deprotect
 * themselves in the channel.
 */
privilege
{
	name = "PROTECTME"
	rank = 300
	level = 10
	flag = "a"
	xop = "AOP"
}
 
/*
 * SAY privilege.
 *
 * Used by botserv/control.
 *
 * Users with this permission can use the BotServ bot in the channel to
 * say or do a /me with the provided message.
 */
privilege
{
	name = "SAY"
	rank = 90
	level = 5
	flag = "B"
	xop = "AOP"
}
 
/*
 * SET privilege.
 *
 * Used by botserv/kick, botserv/set, chanserv/clone, chanserv/log,
 * chanserv/saset/noexpire and chanserv/set.
 *
 * Users with this permission can set what BotServ will kick for, change
 * BotServ and ChanServ settings, clone ChanServ channel setings, and
 * set ChanServ logging options.
 */
privilege
{
	name = "SET"
	rank = 320
	level = 9999
	flag = "s"
	xop = "QOP"
}
 
/*
 * SIGNKICK privilege.
 *
 * Used by chanserv/ban and chanserv/kick.
 *
 * Users with this permission won't get their nick shown in the kick
 * through ChanServ when the setting SIGNKICK is set to LEVEL.
 */
privilege
{
	name = "SIGNKICK"
	rank = 140
	level = 9999
	flag = "K"
	xop = "QOP"
}
 
/*
 * TOPIC privilege.
 *
 * Used by chanserv/topic.
 *
 * Users with this permission can change the channel topic through ChanServ.
 */
privilege
{
	name = "TOPIC"
	rank = 160
	level = 5
	flag = "t"
	xop = "AOP"
}
 
/*
 * UNBAN privilege.
 *
 * Used by chanserv/unban.
 *
 * Users with this permission can unban themselves and others through ChanServ.
 */
privilege
{
	name = "UNBAN"
	rank = 200
	level = 4
	flag = "u"
	xop = "HOP"
}
 
/*
 * VOICE privilege.
 *
 * Used by chanserv/mode and chanserv/modes.
 *
 * Users with this permission can use ChanServ to voice and devoice
 * others in the channel.
 */
privilege
{
	name = "VOICE"
	rank = 70
	level = 4
	flag = "v"
	xop = "HOP"
}
 
/*
 * VOICEME privilege.
 *
 * Used by chanserv/mode and chanserv/modes.
 *
 * Users with this permission can use ChanServ to voice and devoice
 * themselves in the channel.
 */
privilege
{
	name = "VOICEME"
	rank = 60
	level = 3
	flag = "v"
	xop = "VOP"
}
 
/*
 * Core ChanServ commands.
 *
 * In Anope modules can provide (multiple) commands, each of which has a unique command name. Once these modules
 * are loaded you can then configure the commands to be added to any client you like with any name you like.
 *
 * Additionally, you may provide a permission name that must be in the opertype of users executing the command.
 *
 * Sane defaults are provided below that do not need to be edited unless you wish to change the default behavior.
 */
 
/* Command group configuration for ChanServ.
 *
 * Commands may optionally be placed into groups to make ChanServ's HELP output easier to understand.
 * Remove the following groups to use the old behavior of simply listing all ChanServ commands from HELP.
 */
command_group
{
	name = "chanserv/access"
	description = _("Used to manage the list of privileged users")
}
 
command_group
{
	name = "chanserv/status"
	description = _("Used to modify the channel status of you or other users")
}
 
command_group
{
	name = "chanserv/management"
	description = _("Used to manage channels")
}
 
command_group
{
	name = "chanserv/admin"
	description = _("Services Operator commands")
}
 
/* Give it a help command. */
command { service = "ChanServ"; name = "HELP"; command = "generic/help"; }
 
/*
 * cs_access
 *
 * Provides commands chanserv/access and chanserv/levels.
 * Provides the access system "levels".
 *
 * Used for giving users access in channels using a levels system. Allows allows redefining which privileges
 * are representated by given level on a per channel basis.
 *
 * The "LIST" subcommand of chanserv/access will show every access entry on the channel, including access
 * entries not added by cs_access. The "level" of these entries will be the representation of the access
 * entry by the other access system, which could be an XOP command name, or a set of flags.
 */
module { name = "cs_access" }
command { service = "ChanServ"; name = "ACCESS"; command = "chanserv/access"; group = "chanserv/access"; }
command { service = "ChanServ"; name = "LEVELS"; command = "chanserv/levels"; group = "chanserv/access"; }
 
/*
 * cs_akick
 *
 * Provides the command chanserv/akick.
 *
 * Used for preventing users from joining channels.
 */
module
{
	name = "cs_akick"
 
	/*
	 * The maximum number of entries on a channel's autokick list.
	 */
	autokickmax = 32
 
	/*
	 * The default reason for an autokick if none is given.
	 */
	autokickreason = "User has been banned from the channel"
}
command { service = "ChanServ"; name = "AKICK"; command = "chanserv/akick"; group = "chanserv/management"; }
 
/*
 * cs_ban
 *
 * Provides the command chanserv/ban.
 *
 * The configuration option 'kick' may be set in a command block for this command to control
 * whether or not users will be kicked from the channel once banned. The default is 'yes'.
 *
 * The configuration option 'mode' may be set to control which mode is set, such as BAN or QUIET.
 * The default is BAN.
 *
 * Used for banning users from channels.
 */
module { name = "cs_ban" }
command { service = "ChanServ"; name = "BAN"; command = "chanserv/ban"; }
 
/*
 * cs_clone
 *
 * Provides the command chanserv/clone.
 *
 * Used for copying channel settings from one channel to another.
 */
module { name = "cs_clone" }
command { service = "ChanServ"; name = "CLONE"; command = "chanserv/clone"; group = "chanserv/management"; }
 
/*
 * cs_drop
 *
 * Provides the command chanserv/drop.
 *
 * Used for unregistering channels.
 */
module { name = "cs_drop" }
command { service = "ChanServ"; name = "DROP"; command = "chanserv/drop"; }
 
/*
 * cs_enforce
 *
 * Provides the command chanserv/enforce.
 *
 * Used to enforce various channel settings such as secureops and restricted.
 */
module { name = "cs_enforce" }
command { service = "ChanServ"; name = "ENFORCE"; command = "chanserv/enforce"; group = "chanserv/management"; }
 
/*
 * cs_entrymsg
 *
 * Provides the command chanserv/entrymsg.
 *
 * Used to configure entry messages sent to users when they join a channel.
 */
module
{
	name = "cs_entrymsg"
 
	/* The maximum number of entrymsgs allowed per channel. If not set, defaults to 5. */
	maxentries = 5
}
command { service = "ChanServ"; name = "ENTRYMSG"; command = "chanserv/entrymsg"; group = "chanserv/management"; }
 
/*
 * cs_flags
 *
 * Provides the command chanserv/flags.
 * Provides the access system "flags".
 *
 * Used for giving users access in channels.
 *
 * The "LIST" subcommand of chanserv/flags will show every access entry on the channel, including access
 * entries not added by cs_flags. The "Flags" of these entries will be the flags representation of the
 * privilege set granted by the access entry.
 */
module { name = "cs_flags" }
command { service = "ChanServ"; name = "FLAGS"; command = "chanserv/flags"; group = "chanserv/access"; }
 
/*
 * cs_getkey
 *
 * Provides the command chanserv/getkey.
 *
 * Used for getting the key for channels.
 */
module { name = "cs_getkey" }
command { service = "ChanServ"; name = "GETKEY"; command = "chanserv/getkey"; }
 
/*
 * cs_info
 *
 * Provides the command chanserv/info.
 *
 * Used for getting information about channels.
 */
module { name = "cs_info" }
command { service = "ChanServ"; name = "INFO"; command = "chanserv/info"; }
 
/*
 * cs_invite
 *
 * Provides the command chanserv/invite.
 *
 * Used for inviting yourself in to channels.
 */
module { name = "cs_invite" }
command { service = "ChanServ"; name = "INVITE"; command = "chanserv/invite"; }
 
/*
 * cs_kick
 *
 * Provides the command chanserv/kick.
 *
 * Used for kicking users from channels.
 */
module { name = "cs_kick" }
command { service = "ChanServ"; name = "KICK"; command = "chanserv/kick"; }
 
/*
 * cs_list
 *
 * Provides the commands:
 *   chanserv/list - Used for retrieving and searching the registered channel list.
 *   chanserv/set/private - Used for setting whether channels should show up in chanserv/list.
 */
module
{
	name = "cs_list"
 
	/*
	 * The maximum number of channels to be returned for a ChanServ LIST command.
	 */
	listmax = 50
}
command { service = "ChanServ"; name = "LIST"; command = "chanserv/list"; }
 
command { service = "ChanServ"; name = "SET PRIVATE"; command = "chanserv/set/private"; }
 
 
/*
 * cs_log
 *
 * Provides the command chanserv/log.
 *
 * Use for configuring what actions on channels are logged and where.
 */
module
{
	name = "cs_log"
 
	/* Default log settings for newly registered channels */
 
	#default
	{
		command = "chanserv/modes"
		method = "MESSAGE @"
	}
 
	#default
	{
		service = "ChanServ"
		command = "ACCESS"
		method = "MESSAGE @"
	}
 
	#default
	{
		command = "chanserv/xop"
		method = "MESSAGE @"
	}
 
	#default
	{
		service = "ChanServ"
		command = "FLAGS"
		method = "MESSAGE @"
	}
}
command { service = "ChanServ"; name = "LOG"; command = "chanserv/log"; group = "chanserv/management"; }
 
/*
 * cs_mode
 *
 * Provides the command chanserv/mode and chanserv/modes.
 *
 * Used for changing mode locks and changing modes. Multiple commands may be mapped to chanserv/modes, the
 * configuration directive 'set' and 'unset' are used to tell chanserv/modes which modes should be set or
 * unset when the command is executed.
 */
module
{
	name = "cs_mode"
 
	/*
	 * Default modes for mode lock, these are set on newly registered channels.
	 *
	 * If not set, the default is +nt.
	 */
	mlock = "+nt"
}
command { service = "ChanServ"; name = "MODE"; command = "chanserv/mode"; group = "chanserv/management"; }
 
command { service = "ChanServ"; name = "OWNER"; command = "chanserv/modes"; group = "chanserv/status"; set = "OWNER" }
command { service = "ChanServ"; name = "DEOWNER"; command = "chanserv/modes"; group = "chanserv/status"; unset = "OWNER" }
 
command { service = "ChanServ"; name = "PROTECT"; command = "chanserv/modes"; group = "chanserv/status"; set = "PROTECT" }
command { service = "ChanServ"; name = "DEPROTECT"; command = "chanserv/modes"; group = "chanserv/status"; unset = "PROTECT" }
 
command { service = "ChanServ"; name = "OP"; command = "chanserv/modes"; group = "chanserv/status"; set = "OP" }
command { service = "ChanServ"; name = "DEOP"; command = "chanserv/modes"; group = "chanserv/status"; unset = "OP" }
 
command { service = "ChanServ"; name = "HALFOP"; command = "chanserv/modes"; group = "chanserv/status"; set = "HALFOP" }
command { service = "ChanServ"; name = "DEHALFOP"; command = "chanserv/modes"; group = "chanserv/status"; unset = "HALFOP" }
 
command { service = "ChanServ"; name = "VOICE"; command = "chanserv/modes"; group = "chanserv/status"; set = "VOICE" }
command { service = "ChanServ"; name = "DEVOICE"; command = "chanserv/modes"; group = "chanserv/status"; unset = "VOICE" }
 
 
/*
 * cs_register
 *
 * Provides the commands chanserv/register.
 *
 * Used for registering channels.
 */
module { name = "cs_register" }
command { service = "ChanServ"; name = "REGISTER"; command = "chanserv/register"; }
 
/*
 * cs_seen
 *
 * Provides the commands chanserv/seen and operserv/seen.
 *
 * Records the last time a user was seen and what they were doing and allows users to request this data.
 * Also allows administrators to view stats about seen data and purge the database.
 */
module
{
	name = "cs_seen"
 
	/* If set, uses the older 1.8 style seen, which is less resource intensive */
	simple = false
 
	/* Sets the time to keep seen entries in the seen database. */
	purgetime = "30d"
 
	/* Sets the delay between checks for expired seen entries. */
	expiretimeout = "1d"
}
command { service = "OperServ"; name = "SEEN"; command = "operserv/seen"; permission = "operserv/seen"; }
 
/*
 * cs_set
 *
 * Provides the commands:
 *   chanserv/set and chanserv/saset - Dummy help wrappers for the SET commands.
 *   chanserv/set/autoop - Used for configuring whether or not ChanServ automatically gives channel status to users.
 *   chanserv/set/bantype - Used for controlling what format of bans are placed on channels.
 *   chanserv/set/description - Used for changing channels descriptions.
 *   chanserv/set/founder - Used for changing a channel's founder.
 *   chanserv/set/keepmodes - Used for enabling or disabling keepmodes, which retains channel modes.
 *   chanserv/set/peace - Used for configuring if users are able to kick other users with higher access than them.
 *   chanserv/set/persist - Used for setting whether ChanServ should stay in channels after the last user leaves.
 *   chanserv/set/restricted - Used for setting whether users not on a channel's access list can join.
 *   chanserv/set/secure - Used for setting whether users who are recognized for accounts should have their access in channels.
 *   chanserv/set/securefounder - Used for setting whether users with founder level access in channels have true founder or not.
 *   chanserv/set/secureops - Used for restricting who can have channel op privilege in a channel to those whom have access in the channel.
 *   chanserv/set/signkick - Used for setting signkick, which appends the kicker's name to kicks sent through ChanServ.
 *   chanserv/set/successor - Used for setting channel successors, which become channel founders if the founders' account expires.
 *   chanserv/saset/noexpire - Used for setting noexpire, which prevents channels from expiring.
 *
 * This is a dummy command to provide a help wrapper for the various SET commands.
 */
module
{
	name = "cs_set"
 
	/*
	 * The default ban type for newly registered channels.
	 *
	 * defbantype can be:
	 *
	 * 0: ban in the form of *!user@host
	 * 1: ban in the form of *!*user@host
	 * 2: ban in the form of *!*@host
	 * 3: ban in the form of *!*user@*.domain
	 */
	defbantype = 2
 
	/*
	 * If set, persisent channels have their creation times lowered to their
	 * original registration dates.
	 */
	persist_lower_ts = true
}
command { service = "ChanServ"; name = "SET"; command = "chanserv/set"; group = "chanserv/management"; }
command { service = "ChanServ"; name = "SET AUTOOP"; command = "chanserv/set/autoop"; }
command { service = "ChanServ"; name = "SET BANTYPE"; command = "chanserv/set/bantype"; }
command { service = "ChanServ"; name = "SET DESCRIPTION"; command = "chanserv/set/description"; }
command { service = "ChanServ"; name = "SET DESC"; command = "chanserv/set/description"; }
command { service = "ChanServ"; name = "SET FOUNDER"; command = "chanserv/set/founder"; }
command { service = "ChanServ"; name = "SET KEEPMODES"; command = "chanserv/set/keepmodes"; }
command { service = "ChanServ"; name = "SET PEACE"; command = "chanserv/set/peace"; }
command { service = "ChanServ"; name = "SET PERSIST"; command = "chanserv/set/persist"; }
command { service = "ChanServ"; name = "SET RESTRICTED"; command = "chanserv/set/restricted"; }
command { service = "ChanServ"; name = "SET SECURE"; command = "chanserv/set/secure"; }
command { service = "ChanServ"; name = "SET SECUREFOUNDER"; command = "chanserv/set/securefounder"; }
command { service = "ChanServ"; name = "SET SECUREOPS"; command = "chanserv/set/secureops"; }
command { service = "ChanServ"; name = "SET SIGNKICK"; command = "chanserv/set/signkick"; }
command { service = "ChanServ"; name = "SET SUCCESSOR"; command = "chanserv/set/successor"; }
command { service = "ChanServ"; name = "SET NOEXPIRE"; command = "chanserv/saset/noexpire"; permission = "chanserv/saset/noexpire"; }
 
/*
 * cs_set_misc
 *
 * Provides the command chanserv/set/misc.
 *
 * Allows you to create arbitrary commands to set data, and have that data show up in chanserv/info.
 * A field named misc_description may be given for use with help output.
 */
module { name = "cs_set_misc" }
command { service = "ChanServ"; name = "SET URL"; command = "chanserv/set/misc"; misc_description = _("Associate a URL with the channel"); }
command { service = "ChanServ"; name = "SET EMAIL"; command = "chanserv/set/misc"; misc_description = _("Associate an E-mail address with the channel"); }
 
/*
 * cs_status
 *
 * Provides the command chanserv/status.
 *
 * Used for determining a user's access on a channel and whether
 * or not they match any autokick entries.
 */
module { name = "cs_status" }
command { service = "ChanServ"; name = "STATUS"; command = "chanserv/status"; }
 
/*
 * cs_suspend
 *
 * Provides the commands chanserv/suspend and chanserv/unsuspend.
 *
 * Used for suspending and unsuspending channels. Suspended channels can not be used but their settings are stored.
 */
module
{
	name = "cs_suspend"
 
	/*
	 * The length of time before a suspended channel expires.
	 *
	 * This directive is optional.
	 * If not set, the default is never.
	 */
	expire = 90d
 
	/*
	 * Settings to show to non-opers in ChanServ's INFO output.
	 * Comment to completely disable showing any information about
	 * suspended channels to non-opers.
	 */
	show = "suspended, by, reason, on, expires"
}
command { service = "ChanServ"; name = "SUSPEND"; command = "chanserv/suspend"; permission = "chanserv/suspend"; group = "chanserv/admin"; }
command { service = "ChanServ"; name = "UNSUSPEND"; command = "chanserv/unsuspend"; permission = "chanserv/suspend"; group = "chanserv/admin"; }
 
/*
 * cs_sync
 *
 * Provides the command chanserv/sync.
 *
 * Used to sync users channel status modes with what access they have.
 */
module { name = "cs_sync" }
command { service = "ChanServ"; name = "SYNC"; command = "chanserv/sync"; group = "chanserv/management"; }
 
/*
 * cs_topic
 *
 * Provides the commands:
 *   chanserv/topic - Used for changing the channel topic. Useful in conjunction with chanserv/set/topiclock.
 *   chanserv/set/keeptopic - Used for configuring if ChanServ is to restore the channel topic when a channel is created.
 *
 */
module { name = "cs_topic" }
command { service = "ChanServ"; name = "TOPIC"; command = "chanserv/topic"; group = "chanserv/management"; }
command { service = "ChanServ"; name = "SET KEEPTOPIC"; command = "chanserv/set/keeptopic"; }
 
/*
 * cs_unban
 *
 * Provides the command chanserv/unban.
 *
 * Used for unbanning users from channels.
 */
module { name = "cs_unban" }
command { service = "ChanServ"; name = "UNBAN"; command = "chanserv/unban"; }
 
/*
 * cs_updown
 *
 * Provides the commands chanserv/up and chanserv/down.
 *
 * Used for setting or removing your status modes on a channel.
 */
module { name = "cs_updown" }
command { service = "ChanServ"; name = "DOWN"; command = "chanserv/down"; group = "chanserv/status"; }
command { service = "ChanServ"; name = "UP"; command = "chanserv/up"; group = "chanserv/status"; }
 
/*
 * cs_xop
 *
 * Provides the command chanserv/xop.
 * Provides the access system "XOP".
 *
 * Used for giving users access in channels. Many commands may be linked to chanserv/xop, but the
 * privileges given by each is determined by the privilege:xop settings above. These commands should
 * be ordered from highest to lowest, as each command inherits the privileges of the commands below
 * it.
 *
 * The "LIST" subcommand of chanserv/xop will show only XOP access entries of the given XOP type. You
 * can not view the entire access list at once, and instead should use another access system to do that.
 */
module { name = "cs_xop" }
command { service = "ChanServ"; name = "QOP"; command = "chanserv/xop"; group = "chanserv/access"; }
command { service = "ChanServ"; name = "SOP"; command = "chanserv/xop"; group = "chanserv/access"; }
command { service = "ChanServ"; name = "AOP"; command = "chanserv/xop"; group = "chanserv/access"; }
command { service = "ChanServ"; name = "HOP"; command = "chanserv/xop"; group = "chanserv/access"; }
command { service = "ChanServ"; name = "VOP"; command = "chanserv/xop"; group = "chanserv/access"; }
 
 
/*
 * Extra ChanServ related modules.
 */
 
/*
 * cs_statusupdate
 *
 * This module automatically updates users status on channels when the
 * channel's access list is modified.
 */
module { name = "cs_statusupdate" }

MemoServ

/*
 * Example configuration file for MemoServ.
 */
 
/*
 * First, create the service.
 */
service
{
	/*
	 * The name of the MemoServ client.
	 * If you change this value, you probably want to change the client directive in the configuration for the memoserv module too.
	 */
	nick = "MemoServ"
 
	/*
	 * The username of the MemoServ client.
	 */
	user = "services"
 
	/*
	 * The hostname of the MemoServ client.
	 */
	host = "services.host"
 
	/*
	 * The realname of the MemoServ client.
	 */
	gecos = "Memo Service"
 
	/*
	 * The modes this client should use.
	 * Do not modify this unless you know what you are doing.
	 *
	 * These modes are very IRCd specific. If left commented, sane defaults
	 * are used based on what protocol module you have loaded.
	 *
	 * Note that setting this option incorrectly could potentially BREAK some, if
	 * not all, usefulness of the client. We will not support you if this client is
	 * unable to do certain things if this option is enabled.
	 */
	#modes = "+o"
 
	/*
	 * An optional comma separated list of channels this service should join. Outside
	 * of log channels this is not very useful, as the service will just idle in the
	 * specified channels, and will not accept any types of commands.
	 *
	 * Prefixes may be given to the channels in the form of mode characters or prefix symbols.
	 */
	#channels = "@#services,#mychan"
}
 
/*
 * Core MemoServ module.
 *
 * Provides essential functionality for MemoServ.
 */
module
{
	name = "memoserv"
	/*
	 * The name of the client that should be MemoServ. Clients are configured
	 * with the service blocks.
	 */
	client = "MemoServ"
 
	/*
	 * The maximum number of memos a user is allowed to keep by default. Normal users may set the
	 * limit anywhere between 0 and this value. Services Admins can change it to any value or
	 * disable it.
	 *
	 * This directive is optional, but recommended. If not set, the limit is disabled
	 * by default, and normal users can set any limit they want.
	 */
	maxmemos = 20
 
	/*
	 * The delay between consecutive uses of the MemoServ SEND command. This can help prevent spam
	 * as well as denial-of-service attacks from sending large numbers of memos and filling up disk
	 * space (and memory). The default 3-second wait means a maximum average of 150 bytes of memo
	 * per second per user under the current IRC protocol.
	 *
	 * This directive is optional, but recommended.
	 */
	senddelay = 3s
}
 
/*
 * Core MemoServ commands.
 *
 * In Anope modules can provide (multiple) commands, each of which has a unique command name. Once these modules
 * are loaded you can then configure the commands to be added to any client you like with any name you like.
 *
 * Additionally, you may provide a permission name that must be in the opertype of users executing the command.
 *
 * Sane defaults are provided below that do not need to be edited unless you wish to change the default behavior.
 */
 
/* Give it a help command. */
command { service = "MemoServ"; name = "HELP"; command = "generic/help"; }
 
/*
 * ms_cancel
 *
 * Provides the command memoserv/cancel.
 *
 * Used to cancel memos already sent but not yet read.
 */
module { name = "ms_cancel" }
command { service = "MemoServ"; name = "CANCEL"; command = "memoserv/cancel"; }
 
/*
 * ms_check
 *
 * Provides the command memoserv/check.
 *
 * Used to check if a sent memo has been read.
 */
module { name = "ms_check" }
command { service = "MemoServ"; name = "CHECK"; command = "memoserv/check"; }
 
/*
 * ms_del
 *
 * Provides the command memoserv/del.
 *
 * Used to delete your memos.
 */
module { name = "ms_del" }
command { service = "MemoServ"; name = "DEL"; command = "memoserv/del"; }
 
/*
 * ms_ignore
 *
 * Provides the command memoserv/ignore.
 *
 * Used to ignore memos from specific users.
 */
module { name = "ms_ignore" }
command { service = "MemoServ"; name = "IGNORE"; command = "memoserv/ignore"; }
 
/*
 * ms_info
 *
 * Provides the command memoserv/info.
 *
 * Used to show memo related information about an account or a channel.
 */
module { name = "ms_info" }
command { service = "MemoServ"; name = "INFO"; command = "memoserv/info"; }
 
/*
 * ms_list
 *
 * Provides the command memoserv/list.
 *
 * Used to list your current memos.
 */
module { name = "ms_list" }
command { service = "MemoServ"; name = "LIST"; command = "memoserv/list"; }
 
/*
 * ms_read
 *
 * Provides the command memoserv/read.
 *
 * Used to read your memos.
 */
module { name = "ms_read" }
command { service = "MemoServ"; name = "READ"; command = "memoserv/read"; }
 
/*
 * ms_rsend
 *
 * Provides the command memoserv/rsend.
 *
 * Used to send a memo requiring a receipt be sent back once it is read.
 *
 * Requires configuring memoserv:memoreceipt.
 */
#module
{
	name = "ms_rsend"
 
	/*
	 * Only allow Services Operators to use ms_rsend.
	 *
	 * This directive is optional.
	 */
	operonly = false
}
#command { service = "MemoServ"; name = "RSEND"; command = "memoserv/rsend"; }
 
/*
 * ms_send
 *
 * Provides the command memoserv/send.
 *
 * Used to send memos.
 */
module { name = "ms_send" }
command { service = "MemoServ"; name = "SEND"; command = "memoserv/send"; }
 
/*
 * ms_sendall
 *
 * Provides the command memoserv/sendall.
 *
 * Used to send a mass memo to every registered user.
 */
module { name = "ms_sendall" }
command { service = "MemoServ"; name = "SENDALL"; command = "memoserv/sendall"; permission = "memoserv/sendall"; }
 
/*
 * ms_set
 *
 * Provides the command memoserv/set.
 *
 * Used to set settings such as how you are notified of new memos, and your memo limit.
 */
module { name = "ms_set" }
command { service = "MemoServ"; name = "SET"; command = "memoserv/set"; }
 
/*
 * ms_staff
 *
 * Provides the command memoserv/staff.
 *
 * Used to send a memo to all registered staff members.
 */
module { name = "ms_staff" }
command { service = "MemoServ"; name = "STAFF"; command = "memoserv/staff"; permission = "memoserv/staff"; }

OperServ

/*
 * Example configuration file for OperServ.
 */
 
/*
 * First, create the service.
 */
service
{
	/*
	 * The name of the OperServ client.
	 * If you change this value, you probably want to change the client directive in the configuration for the operserv module too.
	 */
	nick = "OperServ"
 
	/*
	 * The username of the OperServ client.
	 */
	user = "services"
 
	/*
	 * The hostname of the OperServ client.
	 */
	host = "services.host"
 
	/*
	 * The realname of the OperServ client.
	 */
	gecos = "Operator Service"
 
	/*
	 * The modes this client should use.
	 * Do not modify this unless you know what you are doing.
	 *
	 * These modes are very IRCd specific. If left commented, sane defaults
	 * are used based on what protocol module you have loaded.
	 *
	 * Note that setting this option incorrectly could potentially BREAK some, if
	 * not all, usefulness of the client. We will not support you if this client is
	 * unable to do certain things if this option is enabled.
	 */
	#modes = "+o"
 
	/*
	 * An optional comma separated list of channels this service should join. Outside
	 * of log channels this is not very useful, as the service will just idle in the
	 * specified channels, and will not accept any types of commands.
	 *
	 * Prefixes may be given to the channels in the form of mode characters or prefix symbols.
	 */
	#channels = "@#services,#mychan"
}
 
/*
 * Core OperServ module.
 *
 * Provides essential functionality for OperServ.
 */
module
{
	name = "operserv"
 
	/*
	 * The name of the client that should be OperServ.
	 */
	client = "OperServ"
 
	/*
	 * These define the default expiration times for, respectively, AKILLs, CHANKILLs, SNLINEs,
	 * and SQLINEs.
	 */
	autokillexpiry = 30d
	chankillexpiry = 30d
	snlineexpiry = 30d
	sqlineexpiry = 30d
 
	/*
	 * If set, this option will make Services send an AKILL command immediately after it has been
	 * added with AKILL ADD. This eliminates the need for killing the user after the AKILL has
	 * been added.
	 *
	 * This directive is optional, but recommended.
	 */
	akillonadd = yes
 
	/*
	 * If set, this option will make Services send an (SVS)KILL command immediately after SNLINE ADD.
	 * This eliminates the need for killing the user after the SNLINE has been added.
	 *
	 * This directive is optional.
	 */
	killonsnline = yes
 
	/*
	 * If set, this option will make Services send an (SVS)KILL command immediately after SQLINE ADD.
	 * This eliminates the need for killing the user after the SQLINE has been added.
	 *
	 * This directive is optional.
	 */
	killonsqline = yes
 
	/*
	 * Adds the nickname of the IRC Operator issuing an AKILL to the kill reason.
	 *
	 * This directive is optional.
	 */
	addakiller = yes
 
	/*
	 * Adds akill IDs to akills. Akill IDs are given to users in their ban reason and can be used to easily view,
	 * modify, or remove an akill from the ID.
	 */
	akillids = yes
 
	/*
	 * If set, only IRC Operators will be permitted to use OperServ, regardless of command access restrictions.
	 *
	 * This directive is optional, but recommended.
	 */
	opersonly = yes
}
 
/*
 * Core OperServ commands.
 *
 * In Anope modules can provide (multiple) commands, each of which has a unique command name. Once these modules
 * are loaded you can then configure the commands to be added to any client you like with any name you like.
 *
 * Additionally, you may provide a permission name that must be in the opertype of users executing the command.
 *
 * Sane defaults are provided below that do not need to be edited unless you wish to change the default behavior.
 */
 
/* Give it a help command. */
command { service = "OperServ"; name = "HELP"; command = "generic/help"; }
 
/*
 * os_akill
 *
 * Provides the command operserv/akill.
 *
 * Used to ban users from the network.
 */
module { name = "os_akill" }
command { service = "OperServ"; name = "AKILL"; command = "operserv/akill"; permission = "operserv/akill"; }
 
/*
 * os_chankill
 *
 * Provides the command operserv/chankill.
 *
 * Used to akill users from an entire channel.
 */
module { name = "os_chankill" }
command { service = "OperServ"; name = "CHANKILL"; command = "operserv/chankill"; permission = "operserv/chankill"; }
 
/*
 * os_defcon
 *
 * Provides the command operserv/defcon.
 *
 * Allows you to set services in defcon mode, which can be used to restrict services access
 * during bot attacks.
 */
#module
{
	name = "os_defcon"
 
	/*
	 * Default DefCon level (1-5) to use when starting Services up. Level 5 constitutes normal operation
	 * while level 1 constitutes the most restrictive operation. If this setting is left out or set to
	 * 0, DefCon will be disabled and the rest of this block will be ignored.
	 */
	#defaultlevel = 5
 
	/*
	 * The following 4 directives define what operations will take place when DefCon is set to levels
	 * 1 through 4. Each level is a list that must be separated by spaces.
	 *
	 * The following operations can be defined at each level:
	 * - nonewchannels: Disables registering new channels
	 * - nonewnicks: Disables registering new nicks
	 * - nomlockchanges: Disables changing MLOCK on registered channels
	 * - forcechanmodes: Forces all channels to have the modes given in the later chanmodes directive
	 * - reducedsessions: Reduces the session limit to the value given in the later sessionlimit directive
	 * - nonewclients: KILL any new clients trying to connect
	 * - operonly: Services will ignore all non-IRCops
	 * - silentoperonly: Services will silently ignore all non-IRCops
	 * - akillnewclients: AKILL any new clients trying to connect
	 * - nonewmemos: No new memos will be sent to block MemoServ attacks
	 */
	level4 = "nonewchannels nonewnicks nomlockchanges reducedsessions"
	level3 = "nonewchannels nonewnicks nomlockchanges forcechanmodes reducedsessions"
	level2 = "nonewchannels nonewnicks nomlockchanges forcechanmodes reducedsessions silentoperonly"
	level1 = "nonewchannels nonewnicks nomlockchanges forcechanmodes reducedsessions silentoperonly akillnewclients"
 
	/*
	 * New session limit to use when a DefCon level is using "reduced" session limiting.
	 */
	#sessionlimit = 2
 
	/*
	 * Length of time to add an AKILL for when DefCon is preventing new clients from connecting to the
	 * network.
	 */
	#akillexpire = 5m
 
	/*
	 * The channel modes to set on all channels when the DefCon channel mode system is in use.
	 *
	 * Note 1: Choose these modes carefully, because when DefCon switches to a level which does NOT have
	 * the mode setting selected, Services will set the reverse on all channels, e.g. if this setting
	 * is +RN when DefCon is used, all channels will be set to +RN, when DefCon is removed, all
	 * channels will be set to -RN. You don't want to set this to +k for example, because when DefCon
	 * is removed, all channels are set -k, removing the key from previously keyed channels.
	 *
	 * Note 2: MLOCKed modes will not be lost.
	 */
	#chanmodes = "+R"
 
	/*
	 * This value can be used to automatically return the network to DefCon level 5 after the specified
	 * time period, just in case any IRC Operator forgets to remove a DefCon setting.
	 *
	 * This directive is optional.
	 */
	#timeout = 15m
 
	/*
	 * If set, Services will send a global message on DefCon level changes.
	 *
	 * This directive is optional.
	 */
	#globalondefcon = yes
 
	/*
	 * If set, Services will send the global message defined in the message directive on DefCon level
	 * changes.
	 *
	 * This directive is optional.
	 */
	#globalondefconmore = yes
 
	/*
	 * Defines the message that will be sent on DefCon level changes when globalondefconmore is set.
	 *
	 * This directive is required only when globalondefconmore is set.
	 */
	#message = "Put your message to send your users here. Don't forget to uncomment globalondefconmore"
 
	/*
	 * Defines the message that will be sent when DefCon is returned to level 5. This directive is optional,
	 * and will also override globalondefcon and globalondefconmore when set.
	 */
	#offmessage = "Services are now back to normal, sorry for any inconvenience"
 
	/*
	 * Defines the reason to use when clients are KILLed or AKILLed from the network while the proper
	 * DefCon operation is in effect.
	 */
	#akillreason = "This network is currently not accepting connections, please try again later."
}
#command { service = "OperServ"; name = "DEFCON"; command = "operserv/defcon"; }
 
/*
 * os_dns
 *
 * Provides the command operserv/dns.
 *
 * This module requires that m_dns is loaded.
 *
 * This module allows controlling a DNS zone. This is useful for
 * controlling what servers users are placed on for load balancing,
 * and to automatically remove split servers.
 *
 * To use this module you must set a nameserver record for services
 * so that DNS queries go to services.
 *
 * Alternatively, you may use a slave DNS server to hide service's IP,
 * provide query caching, and provide better fault tolerance.
 *
 * To do this using BIND, configure similar to:
 *
 * options { max-refresh-time 60; };
 * zone "irc.example.com" IN {
 *   type slave;
 *   masters { 127.0.0.1 port 5353; };
 * };
 *
 * Where 127.0.0.1:5353 is the IP and port services are listening on.
 * We recommend you externally firewall both UDP and TCP to the port
 * Anope is listening on.
 *
 * Finally set a NS record for irc.example.com. to BIND or services.
 */
#module
{
	name = "os_dns"
 
	/* TTL for records. This should be very low if your records change often. */
	ttl = 1m
 
	/* If a server drops this many users the server is automatically removed from the DNS zone.
	 * This directive is optional.
	 */
	user_drop_mark = 50
 
	/* The time used for user_drop_mark. */
	user_drop_time = 1m
 
	/* When a server is removed from the zone for dropping users, it is readded after this time.
	 * This directive is optional.
	 */
	user_drop_readd_time = 5m
 
	/* If set, when a server splits, it is automatically removed from the zone. */
	remove_split_servers = yes
 
	/* If set, when a server connects to the network, it will be automatically added to
	 * the zone if it is a known server.
	 */
	readd_connected_servers = no
}
#command { service = "OperServ"; name = "DNS"; command = "operserv/dns"; permission = "operserv/dns"; }
 
/*
 * os_config
 *
 * Provides the command operserv/config.
 *
 * Used to view and set configuration options while services are running.
 */
module { name = "os_config" }
command { service = "OperServ"; name = "CONFIG"; command = "operserv/config"; permission = "operserv/config"; }
 
/*
 * os_forbid
 *
 * Provides the command operserv/forbid.
 *
 * Used to forbid specific nicks, channels, emails, etc. from being used.
 */
module { name = "os_forbid" }
command { service = "OperServ"; name = "FORBID"; command = "operserv/forbid"; permission = "operserv/forbid"; }
 
/*
 * os_ignore
 *
 * Provides the command operserv/ignore.
 *
 * Used to make Services ignore users.
 */
module { name = "os_ignore" }
command { service = "OperServ"; name = "IGNORE"; command = "operserv/ignore"; permission = "operserv/ignore"; }
 
/*
 * os_info
 *
 * Provides the command operserv/info.
 *
 * Used to add oper only notes to users and channels.
 */
module { name = "os_info" }
command { service = "OperServ"; name = "INFO"; command = "operserv/info"; permission = "operserv/info"; }
 
/*
 * os_jupe
 *
 * Provides the command operserv/jupe.
 *
 * Used to disconnect servers from the network and prevent them from relinking.
 */
module { name = "os_jupe" }
command { service = "OperServ"; name = "JUPE"; command = "operserv/jupe"; permission = "operserv/jupe"; }
 
/*
 * os_kick
 *
 * Provides the command operserv/kick.
 *
 * Used to kick users from channels.
 */
module { name = "os_kick" }
command { service = "OperServ"; name = "KICK"; command = "operserv/kick"; permission = "operserv/kick"; }
 
/*
 * os_kill
 *
 * Provides the command operserv/kill.
 *
 * Used to forcibly disconnect users from the network.
 */
module { name = "os_kill" }
command { service = "OperServ"; name = "KILL"; command = "operserv/kill"; permission = "operserv/kill"; }
 
/*
 * os_list
 *
 * Provides the commands operserv/chanlist and operserv/userlist.
 *
 * Used to list and search the channels and users currently on the network.
 */
module { name = "os_list" }
command { service = "OperServ"; name = "CHANLIST"; command = "operserv/chanlist"; permission = "operserv/chanlist"; }
command { service = "OperServ"; name = "USERLIST"; command = "operserv/userlist"; permission = "operserv/userlist"; }
 
/*
 * os_login
 *
 * Provides the commands operserv/login and operserv/logout.
 *
 * Used to login to OperServ, only required if your oper block requires this.
 */
module { name = "os_login" }
command { service = "OperServ"; name = "LOGIN"; command = "operserv/login"; }
command { service = "OperServ"; name = "LOGOUT"; command = "operserv/logout"; }
 
/*
 * os_logsearch
 *
 * Provides the command operserv/logsearch.
 *
 * Used to search services log files.
 */
module
{
	name = "os_logsearch"
 
	/* The log file name to search. There should be a log{} block configured to log
	 * to a file of this name.
	 */
	logname = "services.log"
}
command { service = "OperServ"; name = "LOGSEARCH"; command = "operserv/logsearch"; permission = "operserv/logsearch"; }
 
/*
 * os_mode
 *
 * Provides the commands operserv/mode and operserv/umode.
 *
 * Used to change user and channel modes.
 */
module { name = "os_mode" }
command { service = "OperServ"; name = "UMODE"; command = "operserv/umode"; permission = "operserv/umode"; }
command { service = "OperServ"; name = "MODE"; command = "operserv/mode"; permission = "operserv/mode"; }
 
/*
 * os_modinfo
 *
 * Provides the commands operserv/modinfo and operserv/modlist.
 *
 * Used to show information about loaded modules.
 */
module { name = "os_modinfo" }
command { service = "OperServ"; name = "MODINFO"; command = "operserv/modinfo"; permission = "operserv/modinfo"; }
command { service = "OperServ"; name = "MODLIST"; command = "operserv/modlist"; permission = "operserv/modinfo"; }
 
/*
 * os_module
 *
 * Provides the commands operserv/modload, operserv/modreload, and operserv/modunload.
 *
 * Used to load, reload, and unload modules.
 */
module { name = "os_module" }
command { service = "OperServ"; name = "MODLOAD"; command = "operserv/modload"; permission = "operserv/modload"; }
command { service = "OperServ"; name = "MODRELOAD"; command = "operserv/modreload"; permission = "operserv/modload"; }
command { service = "OperServ"; name = "MODUNLOAD"; command = "operserv/modunload"; permission = "operserv/modload"; }
 
/*
 * os_news
 *
 * Provides the commands operserv/logonnews, operserv/opernews, and operserv/randomnews.
 *
 * Used to configure news notices shown to users when they connect, and opers when they oper.
 */
module
{
	name = "os_news"
 
	/*
	 * The service bot names to use to send news to users on connection
	 * and to opers when they oper.
	 */
	announcer = "Global"
	oper_announcer = "OperServ"
 
	/*
	 * The number of LOGON/OPER news items to display when a user logs on.
	 *
	 * This directive is optional, if not set it will default to 3.
	 */
	#newscount = 3
}
command { service = "OperServ"; name = "LOGONNEWS"; command = "operserv/logonnews"; permission = "operserv/news"; }
command { service = "OperServ"; name = "OPERNEWS"; command = "operserv/opernews"; permission = "operserv/news"; }
command { service = "OperServ"; name = "RANDOMNEWS"; command = "operserv/randomnews"; permission = "operserv/news"; }
 
/*
 * os_noop
 *
 * Provides the command operserv/noop.
 *
 * Used to NOOP a server, which prevents users from opering on that server.
 */
module { name = "os_noop" }
command { service = "OperServ"; name = "NOOP"; command = "operserv/noop"; permission = "operserv/noop"; }
 
/*
 * os_oline
 *
 * Provides the command operserv/oline.
 *
 * Used to set oper flags on users, and is specific to UnrealIRCd.
 * See /helpop ?svso on your IRCd for more information.
 */
module { name = "os_oline" }
command { service = "OperServ"; name = "OLINE"; command = "operserv/oline"; permission = "operserv/oline"; }
 
/*
 * os_oper
 *
 * Provides the command operserv/oper.
 *
 * Used to configure opers and show information about opertypes.
 */
module { name = "os_oper" }
command { service = "OperServ"; name = "OPER"; command = "operserv/oper"; permission = "operserv/oper"; }
 
/*
 * os_reload
 *
 * Provides the command operserv/reload.
 *
 * Used to reload the services.conf configuration file.
 */
module { name = "os_reload" }
command { service = "OperServ"; name = "RELOAD"; command = "operserv/reload"; permission = "operserv/reload"; }
 
/*
 * os_session
 *
 * Provides the commands operserv/exception and operserv/session.
 *
 * This module enables session limiting. Session limiting prevents users from connecting more than a certain
 * number of times from the same IP at the same time - thus preventing most types of cloning.
 * Once a host reaches it's session limit, all clients attempting to connect from that host will
 * be killed. Exceptions to the default session limit can be defined via the exception list.
 *
 * Used to manage the session limit exception list, and view currently active sessions.
 */
module
{
	name = "os_session"
 
	/*
	 * Default session limit per host. Once a host reaches its session limit, all clients attempting
	 * to connect from that host will be killed.
	 *
	 * This directive is required if os_session is loaded.
	 */
	defaultsessionlimit = 3
 
	/*
	 * The maximum session limit that may be set for a host in an exception.
	 *
	 * This directive is required if os_session is loaded.
	 */
	maxsessionlimit = 100
 
	/*
	 * Sets the default expiry time for session exceptions.
	 *
	 * This directive is required if os_session is loaded.
	 */
	exceptionexpiry = 1d
 
	/*
	 * The message that will be NOTICE'd to a user just before they are removed from the network because
	 * their host's session limit has been exceeded. It may be used to give a slightly more descriptive
	 * reason for the impending kill as opposed to simply "Session limit exceeded".
	 *
	 * This directive is optional, if not set, nothing will be sent.
	 */
	sessionlimitexceeded = "The session limit for your IP %IP% has been exceeded."
 
	/*
	 * Same as above, but should be used to provide a website address where users can find out more
	 * about session limits and how to go about applying for an exception.
	 *
	 * Note: This directive has been intentionally commented out in an effort to remind you to change
	 * the URL it contains. It is recommended that you supply an address/URL where people can get help
	 * regarding session limits.
	 *
	 * This directive is optional, if not set, nothing will be sent.
	 */
	#sessionlimitdetailsloc = "Please visit http://your.website.url/ for more information about session limits."
 
	/*
	 * If set and is not 0, this directive tells Services to add an AKILL if the number of subsequent kills
	 * for the same host exceeds this value, preventing the network from experiencing KILL floods.
	 *
	 * This directive is optional.
	 */
	maxsessionkill = 15
 
	/*
	 * Sets the expiry time for AKILLs set for hosts exceeding the maxsessionkill directive limit.
	 *
	 * This directive is optional, if not set, defaults to 30 minutes.
	 */
	sessionautokillexpiry = 30m
 
	/*
	 * Sets the CIDR value used to determine which IP addresses represent the same person.
	 * By default this would limit 3 connections per IPv4 IP and 3 connections per IPv6 IP.
	 * If you are receiving IPv6 clone attacks it may be useful to set session_ipv6_cidr to
	 * 64 or 48.
	 */
	session_ipv4_cidr = 32
	session_ipv6_cidr = 128
}
command { service = "OperServ"; name = "EXCEPTION"; command = "operserv/exception"; permission = "operserv/exception"; }
command { service = "OperServ"; name = "SESSION"; command = "operserv/session"; permission = "operserv/session"; }
 
/*
 * os_set
 *
 * Provides the command operserv/set.
 *
 * Used to set various settings such as superadmin, debug mode, etc.
 */
module
{
	name = "os_set"
 
	/*
	 * If set, Services Admins will be able to use SUPERADMIN [ON|OFF] which will temporarily grant
	 * them extra privileges such as being a founder on ALL channels.
	 *
	 * This directive is optional.
	 */
	#superadmin = yes
}
command { service = "OperServ"; name = "SET"; command = "operserv/set"; permission = "operserv/set"; }
 
/*
 * os_shutdown
 *
 * Provides the commands operserv/quit, operserv/restart, and operserv/shutdown.
 *
 * Used to quit, restart, or shutdown services.
 */
module { name = "os_shutdown" }
command { service = "OperServ"; name = "QUIT"; command = "operserv/quit"; permission = "operserv/quit"; }
command { service = "OperServ"; name = "RESTART"; command = "operserv/restart"; permission = "operserv/restart"; }
command { service = "OperServ"; name = "SHUTDOWN"; command = "operserv/shutdown"; permission = "operserv/shutdown"; }
 
/*
 * os_stats
 *
 * Provides the operserv/stats command.
 *
 * Used to show statistics about services.
 */
module { name = "os_stats" }
command { service = "OperServ"; name = "STATS"; command = "operserv/stats"; permission = "operserv/stats"; }
 
/*
 * os_svs
 *
 * Provides the commands operserv/svsnick, operserv/svsjoin, and operserv/svspart.
 *
 * Used to force users to change nicks, join and part channels.
 */
module { name = "os_svs" }
command { service = "OperServ"; name = "SVSNICK"; command = "operserv/svsnick"; permission = "operserv/svs"; }
command { service = "OperServ"; name = "SVSJOIN"; command = "operserv/svsjoin"; permission = "operserv/svs"; }
command { service = "OperServ"; name = "SVSPART"; command = "operserv/svspart"; permission = "operserv/svs"; }
 
/*
 * os_sxline
 *
 * Provides the operserv/snline and operserv/sqline commands.
 *
 * Used to ban real names, nick names, and possibly channels.
 */
module { name = "os_sxline" }
command { service = "OperServ"; name = "SNLINE"; command = "operserv/snline"; permission = "operserv/snline"; }
command { service = "OperServ"; name = "SQLINE"; command = "operserv/sqline"; permission = "operserv/sqline"; }
 
/*
 * os_update
 *
 * Provides the operserv/update command.
 *
 * Use to immediately update the databases.
 */
module { name = "os_update" }
command { service = "OperServ"; name = "UPDATE"; command = "operserv/update"; permission = "operserv/update"; }

BotServ

/*
 * Example configuration file for BotServ.
 */
 
/*
 * First, create the service. If you do not want to have a 'BotServ', but do want the ability to have
 * ChanServ assigned to channels for the use of fantasy commands, you may delete the below 'service' block.
 *
 * Note that deleting a 'service' block for a pseudoclient that is already online will not remove the
 * client, the client becomes no different from a normal service bot, so you will have to use botserv/bot
 * to manually delete the client.
 *
 * You may then waant to map some of the below commands to other services, like placing botserv/bot on
 * OperServ so you can delete the below client, and mapping assign and unassign to ChanServ so users are
 * able to control whether or not ChanServ is in the channel. You may also want to map botserv/set/nobot
 * to OperServ so you can restrict who can assign the other core service clients.
 */
service
{
	/*
	 * The name of the BotServ client.
	 * If you change this value, you probably want to change the client directive in the configuration for the botserv module too.
	 */
	nick = "BotServ"
 
	/*
	 * The username of the BotServ client.
	 */
	user = "services"
 
	/*
	 * The hostname of the BotServ client.
	 */
	host = "services.host"
 
	/*
	 * The realname of the BotServ client.
	 */
	gecos = "Bot Service"
 
	/*
	 * The modes this client should use.
	 * Do not modify this unless you know what you are doing.
	 *
	 * These modes are very IRCd specific. If left commented, sane defaults
	 * are used based on what protocol module you have loaded.
	 *
	 * Note that setting this option incorrectly could potentially BREAK some, if
	 * not all, usefulness of the client. We will not support you if this client is
	 * unable to do certain things if this option is enabled.
	 */
	#modes = "+o"
 
	/*
	 * An optional comma separated list of channels this service should join. Outside
	 * of log channels this is not very useful, as the service will just idle in the
	 * specified channels, and will not accept any types of commands.
	 *
	 * Prefixes may be given to the channels in the form of mode characters or prefix symbols.
	 */
	#channels = "@#services,#mychan"
}
 
/*
 * Core BotServ module.
 *
 * Provides essential functionality for BotServ.
 */
module
{
	name = "botserv"
 
	/*
	 * The name of the client that should be BotServ.
	 *
	 * This directive is optional.
	 */
	client = "BotServ"
 
	/*
	 * The default bot options for newly registered channels. Note that changing these options
	 * will have no effect on channels which are already registered. The list must be separated
	 * by spaces.
	 *
	 * The options are:
	 * -    dontkickops: Channel operators will be protected against BotServ kicks
	 * - dontkickvoices: Voiced users will be protected against BotServ kicks
	 * -          greet: The channel's BotServ bot will greet incoming users that have set a greet
	 *                     in their NickServ settings
	 * -        fantasy: Enables the use of BotServ fantasy commands in the channel
	 *
	 * This directive is optional, if left blank, there will be no defaults.
	 */
	defaults = "greet fantasy"
 
	/*
	 * The minimum number of users there must be in a channel before the bot joins it. The best
	 * value for this setting is 1 or 2. This can be 0, the service bots will not part unless
	 * specifically unassigned, and will keep the channel open.
	 */
	minusers = 1
 
	/*
	 * The bots are currently not affected by any modes or bans when they try to join a channel.
	 * But some people may want to make it act like a real bot, that is, for example, remove all
	 * the bans affecting the bot before joining the channel, remove a ban that affects the bot
	 * set by a user when it is in the channel, and so on. Since it consumes a bit more CPU
	 * time, you should not enable this on larger networks.
	 *
	 * This directive is optional.
	 */
	#smartjoin = yes
 
	/*
	 * Modes to set on service bots when they join channels, comment this out for no modes
	 *
	 * This directive is optional.
	 */
	botmodes = "ao"
 
	/*
	 * User modes to set on service bots. Read the comment about the service:modes directive
	 * on why this can be a bad idea to set.
	 */
	#botumodes = "i"
}
 
/*
 * Core BotServ commands.
 *
 * In Anope modules can provide (multiple) commands, each of which has a unique command name. Once these modules
 * are loaded you can then configure the commands to be added to any client you like with any name you like.
 *
 * Additionally, you may provide a permission name that must be in the opertype of users executing the command.
 *
 * Sane defaults are provided below that do not need to be edited unless you wish to change the default behavior.
 */
 
/* Give it a help command. */
command { service = "BotServ"; name = "HELP"; command = "generic/help"; }
 
/*
 * bs_assign
 *
 * Provides the commands:
 *   botserv/assign - Used to assign BotServ bots to channels
 *   botserv/unassign - Used to unassign BotServ bots
 *   botserv/set/nobot - Used to prohibit channels from being assigned BotServ bots.
 *
 * Used for assigning and unassigning bots to channels.
 */
module { name = "bs_assign" }
command { service = "BotServ"; name = "ASSIGN"; command = "botserv/assign"; }
command { service = "BotServ"; name = "UNASSIGN"; command = "botserv/unassign"; }
command { service = "BotServ"; name = "SET NOBOT"; command = "botserv/set/nobot"; permission = "botserv/set/nobot"; }
 
/*
 * bs_autoassign
 *
 * Allows service bots to be automatically assigned to channels upon registration.
 */
#module
{
	name = "bs_autoassign"
 
	/*
	 * Automatically assign ChanServ to channels upon registration.
	 */
	bot = "ChanServ"
}
 
/*
 * bs_badwords
 *
 * Provides the command botserv/badwords.
 *
 * Used for controlling the channel badword list.
 */
module
{
	name = "bs_badwords"
 
	/*
	 * The maximum number of entries a single bad words list can have.
	 */
	badwordsmax = 32
 
	/*
	 * If set, BotServ will use case sensitive checking for badwords.
	 *
	 * This directive is optional.
	 */
	#casesensitive = yes
}
command { service = "BotServ"; name = "BADWORDS"; command = "botserv/badwords"; }
 
/*
 * bs_bot
 *
 * Provides the command botserv/bot.
 *
 * Used for administrating BotServ bots.
 */
module { name = "bs_bot" }
command { service = "BotServ"; name = "BOT"; command = "botserv/bot"; }
 
/*
 * bs_botlist
 *
 * Provides the command botserv/botlist.
 *
 * Used for listing all available bots.
 */
module { name = "bs_botlist" }
command { service = "BotServ"; name = "BOTLIST"; command = "botserv/botlist"; }
 
/*
 * bs_control
 *
 * Provides the commands botserv/act and botserv/say.
 *
 * Used for making the bot message a channel.
 */
module { name = "bs_control" }
command { service = "BotServ"; name = "ACT"; command = "botserv/act"; }
command { service = "BotServ"; name = "SAY"; command = "botserv/say"; }
 
/*
 * bs_info
 *
 * Provides the command botserv/info.
 *
 * Used for getting information on bots or channels.
 */
module { name = "bs_info" }
command { service = "BotServ"; name = "INFO"; command = "botserv/info"; }
 
/*
 * bs_kick
 *
 * Provides the commands:
 *   botserv/kick - Dummy help wrapper for the KICK command.
 *   botserv/kick/amsg - Configures BotServ's AMSG kicker.
 *   botserv/kick/badwords - Configures BotServ's badwords kicker.
 *   botserv/kick/bolds - Configures BotServ's bold text kiceker.
 *   botserv/kick/caps - Configures BotServ's capital letters kicker.
 *   botserv/kick/colors - Configures BotServ's color kicker.
 *   botserv/kick/flood - Configures BotServ's flood kicker.
 *   botserv/kick/italics - Configures BotServ's italics kicker.
 *   botserv/kick/repeat - Configures BotServ's repeat kicker.
 *   botserv/kick/reverses - Configures BotServ's reverse kicker.
 *   botserv/kick/underlines - Configures BotServ's reverse kicker.
 *   botserv/set/dontkickops - Used for preventing BotServ from kicking channel operators.
 *   botserv/set/dontkickvoices - Used for preventing BotServ from kicking voices.
 *
 * Used for configuring what bots should kick for.
 */
module
{
	name = "bs_kick"
 
	/*
	 * The amount of time that data for a user is valid in BotServ. If the data exceeds this time,
	 * it is reset or deleted depending on the case. Do not set it too high, otherwise your
	 * resources will be slightly affected.
	 */
	keepdata = 10m
 
	/*
	 * If set, the bots will use a kick reason that does not state the word when it is kicking.
	 * This is especially useful if you have young people on your network.
	 *
	 * This directive is optional.
	 */
	gentlebadwordreason = yes
}
command { service = "BotServ"; name = "KICK"; command = "botserv/kick"; }
command { service = "BotServ"; name = "KICK AMSG"; command = "botserv/kick/amsg"; }
command { service = "BotServ"; name = "KICK BADWORDS"; command = "botserv/kick/badwords"; }
command { service = "BotServ"; name = "KICK BOLDS"; command = "botserv/kick/bolds"; }
command { service = "BotServ"; name = "KICK CAPS"; command = "botserv/kick/caps"; }
command { service = "BotServ"; name = "KICK COLORS"; command = "botserv/kick/colors"; }
command { service = "BotServ"; name = "KICK FLOOD"; command = "botserv/kick/flood"; }
command { service = "BotServ"; name = "KICK ITALICS"; command = "botserv/kick/italics"; }
command { service = "BotServ"; name = "KICK REPEAT"; command = "botserv/kick/repeat"; }
command { service = "BotServ"; name = "KICK REVERSES"; command = "botserv/kick/reverses"; }
command { service = "BotServ"; name = "KICK UNDERLINES"; command = "botserv/kick/underlines"; }
 
command { service = "BotServ"; name = "SET DONTKICKOPS"; command = "botserv/set/dontkickops"; }
command { service = "BotServ"; name = "SET DONTKICKVOICES"; command = "botserv/set/dontkickvoices"; }
 
 
/*
 * bs_set
 *
 * Provides the commands:
 *   botserv/set/private - Used to prohibit specific BotServ bots from being assigned to channels.
 */
module { name = "bs_set" }
command { service = "BotServ"; name = "SET"; command = "botserv/set"; }
command { service = "BotServ"; name = "SET BANEXPIRE"; command = "botserv/set/banexpire"; }
command { service = "BotServ"; name = "SET PRIVATE"; command = "botserv/set/private"; permission = "botserv/set/private"; }
 
/*
 * greet
 *
 * Provides the commands:
 *   botserv/set/greet - Used for enabling or disabling BotServ's greet messages in a channel.
 *   nickserv/set/greet, nickserv/saset/greet - Used for changing a users greet message, which is displayed when they enter channels.
 */
module { name = "greet" }
command { service = "BotServ"; name = "SET GREET"; command = "botserv/set/greet"; }
command { service = "NickServ"; name = "SET GREET"; command = "nickserv/set/greet"; }
command { service = "NickServ"; name = "SASET GREET"; command = "nickserv/saset/greet"; permission = "nickserv/saset/greet"; }
 
/*
 * GREET privilege.
 *
 * Used by 'greet'.
 *
 * Users with this privilege have their greet shown when they join channels.
 */
privilege
{
	name = "GREET"
	rank = 40
	level = 5
	flag = "g"
	xop = "AOP"
}
 
 
/*
 * fantasy
 *
 * Allows 'fantaisist' commands to be used in channels.
 *
 * Provides the commands:
 *   botserv/set/fantasy - Used for enabling or disabling BotServ's fantasist commands.
 */
module
{
	name = "fantasy"
 
	/*
	 * Defines the prefixes for fantasy commands in channels. One of these characters will have to be prepended
	 * to all fantasy commands. If you choose "!", for example, fantasy commands will be "!kick",
	 * "!op", etc. This directive is optional, if left out, the default fantasy character is "!".
	 */
	#fantasycharacter = "!."
}
command { service = "BotServ"; name = "SET FANTASY"; command = "botserv/set/fantasy"; }
 
/*
 * Fantasy commands
 *
 * Fantasy commands can be executed in channels that have a BotServ bot by prefixing the
 * command with one of the fantasy characters configured in botserv's fantasycharacter
 * directive.
 *
 * Sane defaults are provided below that do not need to be edited unless you wish to change the default behavior.
 */
fantasy { name = "ACCESS"; command = "chanserv/access"; }
fantasy { name = "AKICK"; command = "chanserv/akick"; }
fantasy { name = "AOP"; command = "chanserv/xop"; }
fantasy { name = "BAN"; command = "chanserv/ban"; }
fantasy { name = "CLONE"; command = "chanserv/clone"; }
fantasy { name = "DEHALFOP"; command = "chanserv/modes"; }
fantasy { name = "DEOP"; command = "chanserv/modes"; }
fantasy { name = "DEOWNER"; command = "chanserv/modes"; }
fantasy { name = "DEPROTECT"; command = "chanserv/modes"; }
fantasy { name = "DEVOICE"; command = "chanserv/modes"; }
fantasy { name = "DOWN"; command = "chanserv/down"; }
fantasy { name = "ENFORCE"; command = "chanserv/enforce"; }
fantasy { name = "ENTRYMSG"; command = "chanserv/entrymsg"; }
fantasy { name = "FLAGS"; command = "chanserv/flags"; }
fantasy { name = "HALFOP"; command = "chanserv/modes"; }
fantasy { name = "HELP"; command = "generic/help"; prepend_channel = false; }
fantasy { name = "HOP"; command = "chanserv/xop"; }
fantasy { name = "INFO"; command = "chanserv/info"; prepend_channel = false; }
fantasy { name = "INVITE"; command = "chanserv/invite"; }
fantasy { name = "K"; command = "chanserv/kick"; }
fantasy { name = "KB"; command = "chanserv/ban"; }
fantasy { name = "KICK"; command = "chanserv/kick"; }
fantasy { name = "LEVELS"; command = "chanserv/levels"; }
fantasy { name = "LIST"; command = "chanserv/list"; prepend_channel = false; }
fantasy { name = "LOG"; command = "chanserv/log"; }
fantasy { name = "MODE"; command = "chanserv/mode"; }
fantasy { name = "MUTE"; command = "chanserv/ban"; kick = no; mode = "QUIET"; }
fantasy { name = "OP"; command = "chanserv/modes"; }
fantasy { name = "OWNER"; command = "chanserv/modes"; }
fantasy { name = "PROTECT"; command = "chanserv/modes"; }
fantasy { name = "QOP"; command = "chanserv/xop"; }
fantasy { name = "SEEN"; command = "chanserv/seen"; prepend_channel = false; }
fantasy { name = "SOP"; command = "chanserv/xop"; }
fantasy { name = "STATUS"; command = "chanserv/status"; }
fantasy { name = "SUSPEND"; command = "chanserv/suspend"; permission = "chanserv/suspend"; }
fantasy { name = "SYNC"; command = "chanserv/sync"; }
fantasy { name = "TOPIC"; command = "chanserv/topic"; }
fantasy { name = "UNBAN"; command = "chanserv/unban"; }
fantasy { name = "UNSUSPEND"; command = "chanserv/unsuspend"; permission = "chanserv/suspend"; }
fantasy { name = "UP"; command = "chanserv/up"; }
fantasy { name = "VOICE"; command = "chanserv/modes"; }
fantasy { name = "VOP"; command = "chanserv/xop"; }

HostServ

/*
 * Example configuration file for HostServ.
 */
 
/*
 * First, create the service.
 */
service
{
	/*
	 * The name of the HostServ client.
	 * If you change this value, you probably want to change the client directive in the configuration for the hostserv module too.
	 */
	nick = "HostServ"
 
	/*
	 * The username of the HostServ client.
	 */
	user = "services"
 
	/*
	 * The hostname of the HostServ client.
	 */
	host = "services.host"
 
	/*
	 * The realname of the HostServ client.
	 */
	gecos = "vHost Service"
 
	/*
	 * The modes this client should use.
	 * Do not modify this unless you know what you are doing.
	 *
	 * These modes are very IRCd specific. If left commented, sane defaults
	 * are used based on what protocol module you have loaded.
	 *
	 * Note that setting this option incorrectly could potentially BREAK some, if
	 * not all, usefulness of the client. We will not support you if this client is
	 * unable to do certain things if this option is enabled.
	 */
	#modes = "+o"
 
	/*
	 * An optional comma separated list of channels this service should join. Outside
	 * of log channels this is not very useful, as the service will just idle in the
	 * specified channels, and will not accept any types of commands.
	 *
	 * Prefixes may be given to the channels in the form of mode characters or prefix symbols.
	 */
	#channels = "@#services,#mychan"
}
 
/*
 * Core HostServ module.
 *
 * Provides essential functionality for HostServ.
 */
module
{
	name = "hostserv"
 
	/*
	 * The name of the client that should be HostServ.
	 */
	client = "HostServ"
 
	/*
	 * If enabled, vhosts are activated on users immediately when they are set.
	 */
	activate_on_set = false
}
 
/*
 * Core HostServ commands.
 *
 * In Anope modules can provide (multiple) commands, each of which has a unique command name. Once these modules
 * are loaded you can then configure the commands to be added to any client you like with any name you like.
 *
 * Additionally, you may provide a permission name that must be in the opertype of users executing the command.
 *
 * Sane defaults are provided below that do not need to be edited unless you wish to change the default behavior.
 */
 
/* Give it a help command. */
command { service = "HostServ"; name = "HELP"; command = "generic/help"; }
 
/*
 * hs_del
 *
 * Provides the commands hostserv/del and hostserv/delall.
 *
 * Used for removing users' vHosts.
 */
module { name = "hs_del" }
command { service = "HostServ"; name = "DEL"; command = "hostserv/del"; permission = "hostserv/del"; }
command { service = "HostServ"; name = "DELALL"; command = "hostserv/delall"; permission = "hostserv/del"; }
 
/*
 * hs_group
 *
 * Provides the command hostserv/group.
 *
 * Used for grouping one vHost to many nicks.
 */
module
{
	name = "hs_group"
 
	/*
	 * Upon nickserv/group, this option syncs the nick's main vHost to the grouped nick.
	 */
	syncongroup = false
 
	/*
	 * This makes vhosts act as if they are per account.
	 */
	synconset = false
}
command { service = "HostServ"; name = "GROUP"; command = "hostserv/group"; }
 
/*
 * hs_list
 *
 * Provides the command hostserv/list.
 *
 * Used for listing actively set vHosts.
 */
module { name = "hs_list" }
command { service = "HostServ"; name = "LIST"; command = "hostserv/list"; permission = "hostserv/list"; }
 
/*
 * hs_off
 *
 * Provides the command hostserv/off.
 *
 * Used for turning off your vHost.
 */
module { name = "hs_off" }
command { service = "HostServ"; name = "OFF"; command = "hostserv/off"; }
 
/*
 * hs_on
 *
 * Provides the command hostserv/on.
 *
 * Used for turning on your vHost.
 */
module { name = "hs_on" }
command { service = "HostServ"; name = "ON"; command = "hostserv/on"; }
 
/*
 * hs_request
 *
 * Provides the commands hostserv/request, hostserv/activate, hostserv/reject, and hostserv/waiting.
 *
 * Used to manage vHosts requested by users.
 */
module
{
	name = "hs_request"
 
	/*
	 * If set, Services will send a memo to the user requesting a vHost when it's been
	 * approved or rejected.
	 */
	#memouser = yes
 
	/*
	 * If set, Services will send a memo to all Services staff when a new vHost is requested.
	 */
	#memooper = yes
}
command { service = "HostServ"; name = "REQUEST"; command = "hostserv/request"; }
command { service = "HostServ"; name = "ACTIVATE"; command = "hostserv/activate"; permission = "hostserv/set"; }
command { service = "HostServ"; name = "REJECT"; command = "hostserv/reject"; permission = "hostserv/set"; }
command { service = "HostServ"; name = "WAITING"; command = "hostserv/waiting"; permission = "hostserv/set"; }
 
/*
 * hs_set
 *
 * Provides the commands hostserv/set and hostserv/setall.
 *
 * Used for setting users' vHosts.
 */
module { name = "hs_set" }
command { service = "HostServ"; name = "SET"; command = "hostserv/set"; permission = "hostserv/set"; }
command { service = "HostServ"; name = "SETALL"; command = "hostserv/setall"; permission = "hostserv/set"; }


Other Configuration

Global

/*
 * Example configuration file for Global.
 */
 
/*
 * First, create the service.
 */
service
{
	/*
	 * The name of the Global client.
	 * If you change this value, you probably want to change the client directive in the configuration for the global module too.
	 */
	nick = "Global"
 
	/*
	 * The username of the Global client.
	 */
	user = "services"
 
	/*
	 * The hostname of the Global client.
	 */
	host = "services.host"
 
	/*
	 * The realname of the Global client.
	 */
	gecos = "Global Noticer"
 
	/*
	 * The modes this client should use.
	 * Do not modify this unless you know what you are doing.
	 *
	 * These modes are very IRCd specific. If left commented, sane defaults
	 * are used based on what protocol module you have loaded.
	 *
	 * Note that setting this option incorrectly could potentially BREAK some, if
	 * not all, usefulness of the client. We will not support you if this client is
	 * unable to do certain things if this option is enabled.
	 */
	#modes = "+o"
 
	/*
	 * An optional comma separated list of channels this service should join. Outside
	 * of log channels this is not very useful, as the service will just idle in the
	 * specified channels, and will not accept any types of commands.
	 *
	 * Prefixes may be given to the channels in the form of mode characters or prefix symbols.
	 */
	#channels = "@#services,#mychan"
}
 
/*
 * Core Global module.
 *
 * Provides essential functionality for Global.
 */
module
{
	name = "global"
 
	/*
	 * The name of the client that should be Global.
	 */
	client = "Global"
 
	/*
	 * This is the global message that will be sent when Services are being
	 * shutdown/restarted.
	 *
	 * This directive is optional.
	 */
	#globaloncycledown = "Services are restarting, they will be back shortly - please be good while we're gone"
 
	/*
	 * This is the global message that will be sent when Services (re)join the
	 * network.
	 *
	 * This directive is optional.
	 */
	#globaloncycleup = "Services are now back online - have a nice day"
 
	/*
	 * If set, Services will hide the IRC Operator's nick in a global
	 * message/notice.
	 *
	 * This directive is optional.
	 */
	#anonymousglobal = yes
}
 
/*
 * Core Global commands.
 *
 * In Anope modules can provide (multiple) commands, each of which has a unique command name. Once these modules
 * are loaded you can then configure the commands to be added to any client you like with any name you like.
 *
 * Additionally, you may provide a permission name that must be in the opertype of users executing the command.
 *
 * Sane defaults are provided below that do not need to be edited unless you wish to change the default behavior.
 */
 
/* Give it a help command. */
command { service = "Global"; name = "HELP"; command = "generic/help"; }
 
/*
 * gl_global
 *
 * Provides the command global/global.
 *
 * Used for sending a message to every online user.
 */
module { name = "gl_global" }
command { service = "Global"; name = "GLOBAL"; command = "global/global"; permission = "global/global"; }

Modules

/*
 * [OPTIONAL] Non-Core Modules
 *
 * The following blocks are used to load all non-core modules, including 3rd-party modules.
 * Modules can be prevented from loading by commenting out the line, other modules can be added by
 * adding a module block. These modules will be loaded prior to Services connecting to your network.
 *
 * Note that some of these modules are labeled EXTRA, and must be enabled prior to compiling by
 * running the 'extras' script on Linux and UNIX.
 */
 
/*
 * help
 *
 * Provides the command generic/help.
 *
 * This is a generic help command that can be used with any client.
 */
module { name = "help" }
 
/*
 * m_dns
 *
 * Adds support for the DNS protocol. By itself this module does nothing useful,
 * but other modules such as m_dnsbl and os_dns require this.
 */
#module
{
	name = "m_dns"
 
	/*
	 * The nameserver to use for resolving hostnames, must be an IP or a resolver configuration file.
	 * The below should work fine on all unix like systems. Windows users will have to find their nameservers
	 * from ipconfig /all and put the IP here.
	 */
	nameserver = "/etc/resolv.conf"
	#nameserver = "127.0.0.1"
 
	/*
	 * How long to wait in seconds before a DNS query has timed out.
	 */
	timeout = 5
 
 
	/* Only edit below if you are expecting to use os_dns or otherwise answer DNS queries. */
 
	/*
	 * The IP and port services use to listen for DNS queries.
	 * Note that ports less than 1024 are privileged on UNIX/Linux systems, and
	 * require Anope to be started as root. If you do this, it is recommended you
	 * set options:user and options:group so Anope can change users after binding
	 * to this port.
	 */
	ip = "0.0.0.0"
	port = 53
 
 
	/*
	 * SOA record information.
	 */
 
	/* E-mail address of the DNS administrator. */
	admin = "admin@example.com"
 
	/* This should be the names of the public facing nameservers serving the records. */
	nameservers = "ns1.example.com ns2.example.com"
 
	/* The time slave servers are allowed to cache. This should be reasonably low
	 * if you want your records to be updated without much delay.
	 */
	refresh = 3600
 
	/* A notify block. There should probably be one per nameserver listed in 'nameservers'.
	 */
	notify
	{
		ip = "192.0.2.0"
		port = 53
	}
}
 
/*
 * m_dnsbl
 *
 * Allows configurable DNS blacklists to check connecting users against. If a user
 * is found on the blacklist they will be immediately banned. This is a crucial module
 * to prevent bot attacks.
 */
#module
{
	name = "m_dnsbl"
 
	/*
	 * If set, Services will check clients against the DNSBLs when services connect to its uplink.
	 * This is not recommended, and on large networks will open a very large amount of DNS queries.
	 * Whilst services are not drastically affected by this, your nameserver/DNSBL might care.
	 */
	check_on_connect = no
 
	/*
	 * If set, Services will check clients when coming back from a netsplit. This can cause a large number
	 * of DNS queries open at once. Whilst services are not drastically affected by this, your nameserver/DNSBL
	 * might care.
	 */
	check_on_netburst = no
 
	/*
	 * If set, OperServ will add clients found in the DNSBL to the akill list. Without it, OperServ simply sends
	 * a timed G/K-line to the IRCd and forgets about it. Can be useful if your akill list is being fill up by bots.
	 */
	add_to_akill = yes
 
	blacklist
	{
		/* Name of the blacklist. */
		name = "rbl.efnetrbl.org"
 
		/* How long to set the ban for. */
		time = 4h
 
		/* Reason for akill.
		 * %n is the nick of the user
		 * %u is the ident/username of the user
		 * %g is the realname of the user
		 * %h is the hostname of the user
		 * %i is the IP of the user
		 * %r is the reason (configured below). Will be nothing if not configured.
		 * %N is the network name set in networkinfo:networkname
		 */
		reason = "You are listed in the efnet RBL, visit http://rbl.efnetrbl.org/?i=%i for info"
 
		/* Replies to ban and their reason. If this is totally omitted all replies get banned. */
		1 = "Open Proxy"
		/* Don't ban for result 2 or 3 */
		#2 = "spamtrap666"
		#3 = "spamtrap50"
		4 = "TOR"
		5 = "Drones / Flooding"
	}
 
	blacklist
	{
		name = "dnsbl.dronebl.org"
		time = 4h
		reason = "You have a host listed in the DroneBL. For more information, visit http://dronebl.org/lookup_branded?ip=%i&network=%N"
	}
}
 
/*
 * m_helpchan
 *
 * Gives users who are op in the specified help channel usermode +h (helpop).
 */
#module
{
	name = "m_helpchan"
 
	helpchannel = "#help"
}
 
/*
 * m_httpd
 *
 * Allows services to serve web pages. By itself, this module does nothing useful.
 *
 * Note that using this will allow users to get the IP of your services.
 * To prevent this we recommend using a reverse proxy or a tunnel.
 */
#module
{
	name = "m_httpd"
 
	httpd
	{
		/* Name of this service. */
		name = "httpd/main"
 
		/* IP to listen on. */
		ip = "0.0.0.0"
 
		/* Port to listen on. */
		port = 8080
 
		/* Time before connections to this server are timed out. */
		timeout = 30
 
		/* Listen using SSL. Requires an SSL module. */
		#ssl = yes
 
		/* If you are using a reverse proxy that sends one of the
		 * extforward_headers set below, set this to its IP.
		 * This allows services to obtain the real IP of users by
		 * reading the forwarded-for HTTP header.
		 */
		#extforward_ip = "192.168.0.255"
 
		/* The header to look for. These probably work as is. */
		extforward_header = "X-Forwarded-For Forwarded-For"
	}
}
 
/*
 * m_ldap [EXTRA]
 *
 * This module allows other modules to use LDAP. By itself, this module does nothing useful.
 */
#module
{
	name = "m_ldap"
 
	ldap
	{
		server = "ldap://127.0.0.1"
		port = 389
 
		/*
		 * Admin credentials used for performing searches and adding users.
		 */
		admin_binddn = "cn=Manager,dc=anope,dc=org"
		admin_password = "secret"
	}
}
 
/*
 * m_ldap_authentication [EXTRA]
 *
 * This module allows many commands such as IDENTIFY, RELEASE, RECOVER, GHOST, etc. use
 * LDAP to authenticate users. Requires m_ldap.
*/
#module
{
	name = "m_ldap_authentication"
 
	/*
	 * The distinguished name used for searching for users's accounts.
	 */
	basedn = "ou=users,dc=anope,dc=org"
 
	/*
	 * The search filter used to look up users's accounts.
	 * %account is replaced with the user's account.
	 * %object_class is replaced with the object_class configured below.
	 */
	search_filter = "(&(uid=%account)(objectClass=%object_class))"
 
	/*
	 * The object class used by LDAP to store user account information.
	 * This is used for adding new users to LDAP if registration is allowed.
	 */
	object_class = "anopeUser"
 
	/*
	 * The attribute value used for account names.
	 */
	username_attribute = "uid"
 
	/*
	 * The attribute value used for email addresses.
	 * This directive is optional.
	 */
	email_attribute = "email"
 
	/*
	 * The attribute value used for passwords.
	 * Used when registering new accounts in LDAP.
	 */
	password_attribute = "userPassword"
 
	/*
	 * If set, the reason to give the users who try to "/msg NickServ REGISTER".
	 * If not set, then registration is not blocked.
	 */
	#disable_register_reason = "To register on this network visit http://some.misconfigured.site/register"
 
	/*
	 * If set, the reason to give the users who try to "/msg NickServ SET EMAIL".
	 * If not set, then email changing is not blocked.
	 */
	#disable_email_reason = "To change your email address visit http://some.misconfigured.site"
}
 
/*
 * m_ldap_oper [EXTRA]
 *
 * This module dynamically ties users to Anope opertypes when they identify
 * via LDAP group membership. Requires m_ldap.
 *
 * Note that this doesn't give the user privileges on the IRCd, only in Services.
 */
#module
{
	name = "m_ldap_oper"
 
	/*
	 * An optional binddn to use when searching for groups.
	 * %a is replaced with the account name of the user.
	 */
	#binddn = "cn=Manager,dc=anope,dc=org"
 
	/*
	 * An optional password to bind with.
	 */
	#password = "secret"
 
	/*
	 * The base DN where the groups are.
	 */
	basedn = "ou=groups,dc=anope,dc=org"
 
	/*
	 * The filter to use when searching for users.
	 * %a is replaced with the account name of the user.
	 */
	filter = "(member=uid=%a,ou=users,dc=anope,dc=org)"
 
	/*
	 * The attribute of the group that is the name of the opertype.
	 * The cn attribute should match a known opertype in the config.
	 */
	opertype_attribute = "cn"
}
 
/*
 * m_mysql [EXTRA]
 *
 * This module allows other modules to use MySQL.
 */
#module
{
	name = "m_mysql"
 
	mysql
	{
		/* The name of this service. */
		name = "mysql/main"
		database = "anope"
		server = "127.0.0.1"
		username = "anope"
		password = "mypassword"
		port = 3306
	}
}
/*
 * m_redis
 *
 * This module allows other modules to use Redis.
 */
#module
{
	name = "m_redis"
 
	/* A redis database */
	redis
	{
		/* The name of this service */
		name = "redis/main"
 
		/*
		 * The redis database to use. New connections default to 0.
		 */
		db = 0
 
		ip = "127.0.0.1"
		port = 6379
	}
}
 
/*
 * m_regex_pcre [EXTRA]
 *
 * Provides the regex engine regex/pcre, which uses the Perl Compatible Regular Expressions library.
 */
#module { name = "m_regex_pcre" }
 
/*
 * m_regex_posix [EXTRA]
 *
 * Provides the regex engine regex/posix, which uses the POSIX compliant regular expressions.
 * This is likely the only regex module you will not need extra libraries for.
 */
#module { name = "m_regex_posix" }
 
/*
 * m_regex_tre [EXTRA]
 *
 * Provides the regex engine regex/tre, which uses the TRE regex library.
 */
#module { name = "m_regex_tre" }
 
/*
 * m_rewrite
 *
 * Allows rewriting commands sent to/from clients.
 */
#module { name = "m_rewrite" }
#command
{
	service = "ChanServ"; name = "CLEAR"; command = "rewrite"
 
	/* Enable m_rewrite. */
	rewrite = true
 
	/* Source message to match. A $ can be used to match anything. */
	rewrite_source = "CLEAR $ USERS"
 
	/*
	 * Message to rewrite the source message to. A $ followed by a number, eg $0, gets
	 * replaced by the number-th word from the source_message, starting from 0.
	 */
	rewrite_target = "KICK $1 *"
 
	/*
	 * The command description. This only shows up in HELP's output.
	 * Comment this option to prevent the command from showing in the
	 * HELP command.
	 */
	rewrite_description = "Clears all users from a channel"
}
 
/*
 * m_proxyscan
 *
 * This module allows you to scan connecting clients for open proxies.
 * Note that using this will allow users to get the IP of your services.
 *
 * Currently the two supported proxy types are HTTP and SOCKS5.
 *
 * The proxy scanner works by attempting to connect to clients when they
 * connect to the network, and if they have a proxy running instruct it to connect
 * back to services. If services are able to connect through the proxy to itself
 * then it knows it is an insecure proxy, and will ban it.
 */
#module
{
	name = "m_proxyscan"
 
	/*
	 * The target IP services tells the proxy to connect back to. This must be a publicly
	 * available IP that remote proxies can connect to.
	 */
	#target_ip = "127.0.0.1"
 
	/*
	 * The port services tells the proxy to connect to.
	 */
	target_port = 7226
 
	/*
	 * The listen IP services listen on for incoming connections from suspected proxies.
	 * This probably will be the same as target_ip, but may not be if you are behind a firewall (NAT).
	 */
	#listen_ip = "127.0.0.1"
 
	/*
	 * The port services should listen on for incoming connections from suspected proxies.
	 * This most likely will be the same as target_port.
	 */
	listen_port = 7226
 
	/*
	 * An optional notice sent to clients upon connect.
	 */
	#connect_notice = "We will now scan your host for insecure proxies. If you do not consent to this scan please disconnect immediately."
 
	/*
	 * Who the notice should be sent from.
	 */
	#connect_source = "OperServ"
 
	/*
	 * If set, OperServ will add infected clients to the akill list. Without it, OperServ simply sends
	 * a timed G/K-line to the IRCd and forgets about it. Can be useful if your akill list is being filled up by bots.
	 */
	add_to_akill = yes
 
	/*
	 * How long before connections should be timed out.
	 */
	timeout = 5
 
	proxyscan
	{
		/* The type of proxy to check for. A comma separated list is allowed. */
		type = "HTTP"
 
		/* The ports to check. */
		port = "80,8080"
 
		/* How long to set the ban for. */
		time = 4h
 
		/*
		 * The reason to ban the user for.
		 * %h is replaced with the type of proxy found.
		 * %i is replaced with the IP of proxy found.
		 * %p is replaced with the port.
		 */
		reason = "You have an open proxy running on your host (%t:%i:%p)"
	}
}
 
/*
 * m_sasl
 *
 * Some IRCds allow "SASL" authentication to let users identify to Services
 * during the IRCd user registration process. If this module is loaded, Services will allow
 * authenticating users through this mechanism. Supported mechanisms are:
 * PLAIN, EXTERNAL.
 */
#module { name = "m_sasl" }
 
/*
 * m_sasl_dh-aes [EXTRA]
 *
 * Add the DH-AES mechanism to SASL.
 * Requires m_sasl to be loaded.
 * Requires openssl.
 */
#module { name = "m_sasl_dh-aes" }
 
/*
 * m_sasl_dh-blowfish [EXTRA]
 *
 * Add the DH-BLOWFISH mechanism to SASL.
 * Requires m_sasl to be loaded.
 * Requires openssl.
 */
#module { name = "m_sasl_dh-blowfish" }
 
/*
 * m_ssl_gnutls [EXTRA]
 *
 * This module provides SSL services to Anope using GnuTLS, for example to
 * connect to the uplink server(s) via SSL.
 *
 * You may only load either m_ssl_gnutls or m_ssl_openssl, bot not both.
 */
#module
{
	name = "m_ssl_gnutls"
 
	/*
	 * An optional certificate and key for m_ssl_gnutls to give to the uplink.
	 *
	 * You can generate your own certificate and key pair by using:
	 *
	 *   certtool --generate-privkey --bits 2048 --outfile anope.key
	 *   certtool --generate-self-signed --load-privkey anope.key --outfile anope.crt
	 *
	 */
	cert = "data/anope.crt"
	key = "data/anope.key"
 
	/*
	 * Diffie-Hellman parameters to use when acting as a server. This is only
	 * required for TLS servers that want to use ephemeral DH cipher suites.
	 *
	 * This is NOT required for Anope to connect to the uplink server(s) via SSL.
	 *
	 * You can generate DH parameters by using:
	 *
	 *   certtool --generate-dh-params --bits 2048 --outfile dhparams.pem
	 *
	 */
#	dhparams = "data/dhparams.pem"
}
 
/*
 * m_ssl_openssl [EXTRA]
 *
 * This module provides SSL services to Anope using OpenSSL, for example to
 * connect to the uplink server(s) via SSL.
 *
 * You may only load either m_ssl_openssl or m_ssl_gnutls, bot not both.
 *
 */
#module
{
	name = "m_ssl_openssl"
 
	/*
	 * An optional certificate and key for m_ssl_openssl to give to the uplink.
	 *
	 * You can generate your own certificate and key pair by using:
	 *
	 *   openssl genrsa -out anope.key 2048
	 *   openssl req -new -x509 -key anope.key -out anope.crt -days 1095
	 */
	cert = "data/anope.crt"
	key = "data/anope.key"
}
 
/*
 * m_sql_authentication [EXTRA]
 *
 * This module allows authenticating users against an external SQL database using a custom
 * query.
 */
#module
{
	name = "m_sql_authentication"
 
	/* SQL engine to use. Should be configured elsewhere with m_mysql, m_sqlite, etc. */
	engine = "mysql/main"
 
	/* Query to execute to authenticate. A non empty result from this query is considered a success,
	 * and the user will be authenticated.
	 *
	 * @a@ is replaced with the user's account name
	 * @p@ is replaced with the user's password
	 * @n@ is replaced with the user's nickname
	 * @i@ is replaced with the user's IP
	 *
	 * Note that @n@ and @i@ may not always exist in the case of a user identifying outside of the normal
	 * nickserv/identify command, such as through the web panel.
	 *
	 * Furthermore, if a field named email is returned from this query the user's email is
	 * set to its value.
	 *
	 *
	 * We've included some example queries for some popular website/forum systems.
	 *
	 * Drupal 6: "SELECT `mail` AS `email` FROM `users` WHERE `name` = @a@ AND `pass` = MD5(@p@) AND `status` = 1"
	 * e107 cms: "SELECT `user_email` AS `email` FROM `e107_user` WHERE `user_loginname` = @a@ AND `user_password` = MD5(@p@)"
	 * SMF Forum: "SELECT `email_address` AS `email` FROM `smf_members` WHERE `member_name` = @a@ AND `passwd` = SHA1(CONCAT(LOWER(@a@), @p@))"
	 * vBulletin: "SELECT `email` FROM `user` WHERE `username` = @a@ AND `password` = MD5(CONCAT(MD5(@p@), `salt`))"
	 * IP.Board: "SELECT `email` FROM `ibf_members` WHERE `name` = @a@ AND `members_pass_hash` = MD5(CONCAT(MD5(`members_pass_salt`), MD5(@p@)))"
	 */
	query = "SELECT `email_addr` AS `email` FROM `my_users` WHERE `username` = @a@ AND `password` = MD5(CONCAT('salt', @p@))"
 
	/*
	 * If set, the reason to give the users who try to "/msg NickServ REGISTER".
	 * If not set, then registration is not blocked.
	 */
	#disable_reason = "To register on this network visit http://some.misconfigured.site/register"
 
	/*
	 * If set, the reason to give the users who try to "/msg NickServ SET EMAIL".
	 * If not set, then email changing is not blocked.
	 */
	#disable_email_reason = "To change your email address visit http://some.misconfigured.site"
}
 
/*
 * m_sql_log [EXTRA]
 *
 * This module adds an additional target option to log{} blocks
 * that allows logging Service's logs to SQL. To log to SQL, add
 * the SQL service name to log:targets prefixed by sql_log:. For
 * example:
 *
 * log
 * {
 *     targets = "services.log sql_log:mysql/main"
 *     ...
 * }
 *
 * By default this module logs to the table `logs`, and will create
 * it if it doesn't exist. This module does not create any indexes (keys)
 * on the table and it is recommended you add them yourself as necessary.
 */
#module { name = "m_sql_log" }
 
/*
 * m_sql_oper [EXTRA]
 *
 * This module allows granting users services operator privileges and possibly IRC Operator
 * privileges based on an external SQL database using a custom query.
 */
#module
{
	name = "m_sql_oper"
 
	/* SQL engine to use. Should be configured elsewhere with m_mysql, m_sqlite, etc. */
	engine = "mysql/main"
 
	/* Query to execute to determine if a user should have operator privileges.
	 * A field named opertype must be returned in order to link the user to their oper type.
	 * The oper types must be configured earlier in services.conf.
	 *
	 * If a field named modes is returned from this query then those modes are set on the user.
	 * Without this, only a simple +o is sent.
	 *
	 * @a@ is replaced with the user's account name
	 * @i@ is replaced with the user's IP
	 */
	query = "SELECT `opertype` FROM `my_users` WHERE `user_name` = @a@"
}
 
/*
 * m_sqlite [EXTRA]
 *
 * This module allows other modules to use SQLite.
 */
#module
{
	name = "m_sqlite"
 
	/* A SQLite database */
	sqlite
	{
		/* The name of this service. */
		name = "sqlite/main"
 
		/* The database name, it will be created if it does not exist. */
		database = "anope.db"
	}
}
 
/*
 * webcpanel
 *
 * This module creates a web configuration panel that allows users and operators to perform any task
 * as they could over IRC. If you are using the default configuration you should be able to access
 * this panel by visiting http://127.0.0.1:8080 in your web browser from the machine Anope is running on.
 *
 * This module requires m_httpd.
 */
#module
{
	name = "webcpanel"
 
	/* Web server to use. */
	server = "httpd/main";
 
	/* Template to use. */
	template = "default";
 
	/* Page title. */
	title = "Anope IRC Services";
}
 
/*
 * m_xmlrpc
 *
 * Allows remote applications (websites) to execute queries in real time to retrieve data from Anope.
 * By itself this module does nothing, but allows other modules (m_xmlrpc_main) to receive and send XMLRPC queries.
 */
#module
{
	name = "m_xmlrpc"
 
	/* Web service to use. Requires m_httpd. */
	server = "httpd/main"
}
 
/*
 * m_xmlrpc_main
 *
 * Adds the main XMLRPC core functions.
 * Requires m_xmlrpc.
 */
#module { name = "m_xmlrpc_main" }

</code>

irc2sql

/*
 * Example configuration file for the irc2sql gateway
 *
 */
 
service
{
	/*
	 * The name of the StatServ client.
	 */
	nick = "StatServ"
 
	/*
	 * The username of the StatServ client.
	 */
	user = "StatServ"
 
	/*
	 * The hostname of the StatServ client.
	 */
	host = "services.host"
 
	/*
	 * The realname of the StatServ client.
	 */
	gecos = "Statistical Service"
 
	/*
	 * The modes this client should use.
	 * Do not modify this unless you know what you are doing.
	 *
	 * These modes are very IRCd specific. If left commented, sane defaults
	 * are used based on what protocol module you have loaded.
	 *
	 * Note that setting this option incorrectly could potentially BREAK some, if
	 * not all, usefulness of the client. We will not support you if this client is
	 * unable to do certain things if this option is enabled.
	 */
	#modes = "+o"
 
	/*
	 * An optional comma separated list of channels this service should join. Outside
	 * of log channels this is not very useful, as the service will just idle in the
	 * specified channels, and will not accept any types of commands.
	 *
	 * Prefixes may be given to the channels in the form of mode characters or prefix symbols.
	 */
	#channels = "@#services,#mychan"
}
 
module
{
	name = "irc2sql"
 
	/*
	 * The name of the client that should send the CTCP VERSION requests.
	 * It must already exist or must be defined in the following service block.
	 */
	client = "StatServ"
 
	/* 
	 * The name of the SQL engine to use.
	 * This must be MySQL and must match the name in the mysql{} block
	 */
	engine = "mysql/main"
 
	/*
	 * An optional prefix to prepended to the name of each created table.
	 * Do not use the same prefix for other programs.
	 */
	prefix = "anope_"
 
	/*
	 * GeoIP - Automatically adds users geoip location to the user table.
	 * Tables are created by irc2sql, you have to run the
	 * geoipupdate script after you started Anope to download
	 * and import the GeoIP database.
	 *
	 * The geoip database can be the smaller "country" database or the
	 * larger "city" database. Comment to disable geoip lookup.
	 */
	geoip_database = "country"
 
	/*
	 * Get the CTCP version from users
	 * The users connecting to the network will receive a CTCP VERSION
	 * request from the above configured services client
	 */
	ctcpuser = "yes"
 
	/*
	 * Send out CTCP VERSION requests to users during burst.
	 * Disable this if you restart Anope often and don't want to
	 * annoy your users.
	 */
	ctcpeob = "yes"
}