Difference between revisions of "2.0/Configuration"

From AnopeWiki
Jump to: navigation, search
m (Services Configuration)
(Main Configuration)
Line 3: Line 3:
 
''' These are ALL example configuration files, as found in the Anope 2.0 Source'''
 
''' These are ALL example configuration files, as found in the Anope 2.0 Source'''
 
== <div class="moduleheader">Main Configuration</div> ==
 
== <div class="moduleheader">Main Configuration</div> ==
 +
=== Sections ===
 +
==== Defines ====
 +
:;define {...} :
 +
::;name= :What to define
 +
::;value= :What the defined value should be set to.  This is similar to setting a variable.
 +
 +
==== Includes ====
 +
:;include {...} :
 +
::;type= :What type of include to use
 +
::;name= :What to include.
 +
 +
==== IRCD Config ====
 +
:* '''NOTE''': Do NOT just uncomment the example IRCd links and expect them to work.  These are examples of what you need to add to your IRCd configuration so that services, using the uplink section, can connect to the IRCd.
 +
 +
:;uplink {...} :
 +
::;host= :The IRCd's host address (recommended to use IP only)
 +
::;ipv6= :Is the host using IPv6
 +
::;ssl= :Use SSL to connect to the IRCd?  Not needed is you are connecting via localhost.
 +
::;port= :The port that the IRCd is listening on, to connect services to.
 +
::;password= :The connect password from your IRCd link definition in the IRCd configuration.
 +
 +
==== Server Information ====
 +
:;serverinfo {...} :
 +
::;name= :Services' host name as seen by clients who connect to your network
 +
::;description= :The "name" field show when your services is /whois'd
 +
::;localhost= :The local (machine where services is running) address for services to connect FROM '''Optional and not normally needed'''
 +
::;id= :Server ID.  '''Only needed if your ircd supports/requires it'''
 +
::;pid= :Process ID file.  This defines where it is stored, relative to your running services folder
 +
::;motd= :Message Of The Day file.  This defines where it is stored, relative to your running services folder
 +
 +
==== Protocol ====
 +
:Supported protocols
 +
::* bahamut
 +
::* charybdis
 +
::* hybrid
 +
::* inspircd12
 +
::* inspircd20
 +
::* ngircd
 +
::* plexus
 +
::* ratbox
 +
::* unreal
 +
 +
:;module {...} :
 +
::;name= :Name of the (above) supported protocol to load, you can have only 1.
 +
::;use_server_side_mlock= :If the protocol for your IRCd support it, enable server side mlock to allow the ircd to handle the mlocking status
 +
::;use_server_side_topiclock= :If the protocol for IRCd support it, enable the server side topic locking to allow the ircd to handle it.
 +
 +
==== Network Information ====
 +
:;networkinfo {...} :
 +
::;networkname= :Short Name of your network
 +
::;nicklen= :Maximum length of nicknames on your network.  This must match the size defined in your IRCd configuration.
 +
::;userlen= :Maximum length of idents on your network.  This must match the size defined in your IRCd configuration.
 +
::;hostlen= :Maximum length of hostnames on your network.  This must match the size defined in your IRCd configuration.
 +
::;chanlen= :Maximum length of channel names on your network. This must match the size defined in your IRCd configuration.
 +
::;modelistsize= :Maximum length of list modes (Bans, Exceptions, etc) settable on your network.  This must match the size defined in your IRCd configuration.
 +
::;vhost_chars= :Allowed characters in hostnames.  It is recommended that you DO NOT change this, unless you have a really good understanding of your ircd and what valid hostnames are.
 +
::;allow_undotted_vhost= :Allow vhost that do not contain at least a single '.'?  This is not recommended.
 +
::;disallow_start_or_end= :Prevent vhosts that begin or end with the defined characters.  Changing this value is not recommended.
 +
 +
==== Services Process Options ====
 +
:;options {...} :
 +
::;user= :User to run the services process as.
 +
::;group= :Group to run the services process as.
 +
::;casemap= :The character set services uses.  Once set, changing the value is not recommended.  The default is ASCII which is what most IRCd's use by default.
 +
::;seed= :This is the random number seed needed for your internal random number generation.
 +
::;strinctpasswords= :Require strict passwords that contain at least 5 characters in length and do not match the nickname.
 +
::;badpasslimit= :Number of times you can fail to enter your password before services /KILL's the user attempting the passwords.
 +
::;badpasstimeout= :The time before the badpasslimit count resets the attempted counts to 0.
 +
::;updatetimeout= :The time between automatic database updates. 
 +
::;expiretimeout= :The time between checking for expired nicknames, and channels.
 +
::;readtimeout= :The time to allow the uplink to try to connect, if it does not connect, then issue an error message and stop.
 +
::;warningtimeout= :Send out program errors and warning messages at this interval.
 +
::;timeoutcheck= :The maximum time to check the timeout list of the uplink, etc.
 +
::;useprivmsg= :This breaks the '''STANDARDS''' or the protocol, and is not recommended.  It allows services to use /MSG instead of /NOTICE when sending information to the user.  If enabled, the nickserv option defmsg can set weather or not to use NOTICE or MSG by default.  It also allows users to chose between the two.
 +
::;usestrictprivmsg= :This will force they use of '/msg service@services.host command' instead of the '/msg services command' which would normally be converted from '/service command' using your IRCd command aliases function.  Leave commented out to disable.
 +
::;hidestatso= :Hide the list of ircops from users who try to use '/stats o'
 +
::;ulineservers= :This is a list of servers that Services will not try to reverse mode changes for.  '''WARNING''':Do NOT put your normal IRC user servers in this directive.
 +
::;retrywiat= :How long to wait before retrying to reconnect with the IRCd if the link dies.
 +
::;hideprivilegedcommands= :Hide commands that the user does not have access to.
 +
::;hideregisteredcommands= :Hide commands that the user does not have access to unless they log in to nickserv.
 +
::;regexengine= :The regular expression engine to use.  See Regex modules.
 +
::;languages= :Supported languages, '''IF your Operating system supports them'''.
 +
::;defaultlanguage= :What your server's default language is, if it is something other than English.
 +
 +
==== Logging ====
 +
:;log {...} :
 +
::;target= :Where to send log entries.  This is a space seperated list.
 +
::;source= :The source(s) to allow logs from. 
 +
::;bot= :Name of the generic Messaging nick
 +
::;logage= :How many days to keep log files
 +
::;What to log... :
 +
:::;admin= :Admin commands logged
 +
:::;override= :Overriden (by services admin/root) commands logged
 +
:::;commands= :Commandslogged
 +
:::;servers= :Service messaging logged
 +
:::;channels= :Channel commands logged
 +
:::;users= :User connects, nick changes, etc commands logged
 +
:::;other= :Other commands/entries logged
 +
:::;rawio= :log raw communications between services and the ircd.  Recommended this be set to no.
 +
:::;debug= :log debug information.  Recommended this be set to no.
 +
 +
==== Opertypes ====
 +
:;opertype {...}
 +
::;name= :Oper type definition name
 +
::;commands= :What this oper type has access to
 +
::;inherits= :What is hinherited from other opertype blocks
 +
::;privs= :What services privileges this opertype has access to
 +
::;modes= :What mode to automatically give the user, note that some IRCd's do not support this.
 +
 +
==== Oper defines ====
 +
:;oper {...} :
 +
::;name= :Oper's Nickname
 +
::;type= :Opertype
 +
::;require_oper= :Require the oper to be opere'd on the ircd before recognising their status in services
 +
::;password= :Optional password to have to login to to use oper level commands.  If you are not using '''require_oper''' then this should be used.
 +
::;certfp= :Secure Cert finger print for oper access.  This is nor supported in all IRCd's
 +
::;host= :Space separated Hostmask(s) for this oper
 +
::;vhost- :Oper Vhost.  This will override any other vhost they may have.
 +
 +
==== Mail ====
 +
:;mail {...} :
 +
::;usemail= :Should we use email
 +
::;sendmailpath= :Path to sendmail-like program on your system
 +
::;sendfrom= :Email address the email comes from
 +
::;delay= :The minimum amount of time between emails triggered by the same user.
 +
::;dontquoteaddresses= :Should we not put quotes around email names in the TO: field?
 +
::;registration_subject= :Subject of nick registration email
 +
::;registration_message= :Message of nick registration email
 +
::;reset_subject= :Subject of password reset email
 +
::;reset_message= :Message of password reset email
 +
::;emailchange_subject= :Subject of email change email
 +
::;emailchange_message= :Message of email change email
 +
::;memo_subject= :Subject of memo notification email
 +
::;memo_message= :Message of memo notification email
 +
 +
==== Database Module ====
 +
:;module {...} :
 +
::;name= :Name of module
 +
::*May includ other options such as engine name, and others.
  
 
=== Example Conf ===
 
=== Example Conf ===

Revision as of 18:08, 13 July 2014

Language

English

These are ALL example configuration files, as found in the Anope 2.0 Source

Main Configuration

Sections

Defines

define {...} 
name= 
What to define
value= 
What the defined value should be set to. This is similar to setting a variable.

Includes

include {...} 
type= 
What type of include to use
name= 
What to include.

IRCD Config

  • NOTE: Do NOT just uncomment the example IRCd links and expect them to work. These are examples of what you need to add to your IRCd configuration so that services, using the uplink section, can connect to the IRCd.
uplink {...} 
host= 
The IRCd's host address (recommended to use IP only)
ipv6= 
Is the host using IPv6
ssl= 
Use SSL to connect to the IRCd? Not needed is you are connecting via localhost.
port= 
The port that the IRCd is listening on, to connect services to.
password= 
The connect password from your IRCd link definition in the IRCd configuration.

Server Information

serverinfo {...} 
name= 
Services' host name as seen by clients who connect to your network
description= 
The "name" field show when your services is /whois'd
localhost= 
The local (machine where services is running) address for services to connect FROM Optional and not normally needed
id= 
Server ID. Only needed if your ircd supports/requires it
pid= 
Process ID file. This defines where it is stored, relative to your running services folder
motd= 
Message Of The Day file. This defines where it is stored, relative to your running services folder

Protocol

Supported protocols
  • bahamut
  • charybdis
  • hybrid
  • inspircd12
  • inspircd20
  • ngircd
  • plexus
  • ratbox
  • unreal
module {...} 
name= 
Name of the (above) supported protocol to load, you can have only 1.
use_server_side_mlock= 
If the protocol for your IRCd support it, enable server side mlock to allow the ircd to handle the mlocking status
use_server_side_topiclock= 
If the protocol for IRCd support it, enable the server side topic locking to allow the ircd to handle it.

Network Information

networkinfo {...} 
networkname= 
Short Name of your network
nicklen= 
Maximum length of nicknames on your network. This must match the size defined in your IRCd configuration.
userlen= 
Maximum length of idents on your network. This must match the size defined in your IRCd configuration.
hostlen= 
Maximum length of hostnames on your network. This must match the size defined in your IRCd configuration.
chanlen= 
Maximum length of channel names on your network. This must match the size defined in your IRCd configuration.
modelistsize= 
Maximum length of list modes (Bans, Exceptions, etc) settable on your network. This must match the size defined in your IRCd configuration.
vhost_chars= 
Allowed characters in hostnames. It is recommended that you DO NOT change this, unless you have a really good understanding of your ircd and what valid hostnames are.
allow_undotted_vhost= 
Allow vhost that do not contain at least a single '.'? This is not recommended.
disallow_start_or_end= 
Prevent vhosts that begin or end with the defined characters. Changing this value is not recommended.

Services Process Options

options {...} 
user= 
User to run the services process as.
group= 
Group to run the services process as.
casemap= 
The character set services uses. Once set, changing the value is not recommended. The default is ASCII which is what most IRCd's use by default.
seed= 
This is the random number seed needed for your internal random number generation.
strinctpasswords= 
Require strict passwords that contain at least 5 characters in length and do not match the nickname.
badpasslimit= 
Number of times you can fail to enter your password before services /KILL's the user attempting the passwords.
badpasstimeout= 
The time before the badpasslimit count resets the attempted counts to 0.
updatetimeout= 
The time between automatic database updates.
expiretimeout= 
The time between checking for expired nicknames, and channels.
readtimeout= 
The time to allow the uplink to try to connect, if it does not connect, then issue an error message and stop.
warningtimeout= 
Send out program errors and warning messages at this interval.
timeoutcheck= 
The maximum time to check the timeout list of the uplink, etc.
useprivmsg= 
This breaks the STANDARDS or the protocol, and is not recommended. It allows services to use /MSG instead of /NOTICE when sending information to the user. If enabled, the nickserv option defmsg can set weather or not to use NOTICE or MSG by default. It also allows users to chose between the two.
usestrictprivmsg= 
This will force they use of '/msg service@services.host command' instead of the '/msg services command' which would normally be converted from '/service command' using your IRCd command aliases function. Leave commented out to disable.
hidestatso= 
Hide the list of ircops from users who try to use '/stats o'
ulineservers= 
This is a list of servers that Services will not try to reverse mode changes for. WARNING:Do NOT put your normal IRC user servers in this directive.
retrywiat= 
How long to wait before retrying to reconnect with the IRCd if the link dies.
hideprivilegedcommands= 
Hide commands that the user does not have access to.
hideregisteredcommands= 
Hide commands that the user does not have access to unless they log in to nickserv.
regexengine= 
The regular expression engine to use. See Regex modules.
languages= 
Supported languages, IF your Operating system supports them.
defaultlanguage= 
What your server's default language is, if it is something other than English.

Logging

log {...} 
target= 
Where to send log entries. This is a space seperated list.
source= 
The source(s) to allow logs from.
bot= 
Name of the generic Messaging nick
logage= 
How many days to keep log files
What to log... 
admin= 
Admin commands logged
override= 
Overriden (by services admin/root) commands logged
commands= 
Commandslogged
servers= 
Service messaging logged
channels= 
Channel commands logged
users= 
User connects, nick changes, etc commands logged
other= 
Other commands/entries logged
rawio= 
log raw communications between services and the ircd. Recommended this be set to no.
debug= 
log debug information. Recommended this be set to no.

Opertypes

opertype {...}
name= 
Oper type definition name
commands= 
What this oper type has access to
inherits= 
What is hinherited from other opertype blocks
privs= 
What services privileges this opertype has access to
modes= 
What mode to automatically give the user, note that some IRCd's do not support this.

Oper defines

oper {...} 
name= 
Oper's Nickname
type= 
Opertype
require_oper= 
Require the oper to be opere'd on the ircd before recognising their status in services
password= 
Optional password to have to login to to use oper level commands. If you are not using require_oper then this should be used.
certfp= 
Secure Cert finger print for oper access. This is nor supported in all IRCd's
host= 
Space separated Hostmask(s) for this oper
vhost- 
Oper Vhost. This will override any other vhost they may have.

Mail

mail {...} 
usemail= 
Should we use email
sendmailpath= 
Path to sendmail-like program on your system
sendfrom= 
Email address the email comes from
delay= 
The minimum amount of time between emails triggered by the same user.
dontquoteaddresses= 
Should we not put quotes around email names in the TO: field?
registration_subject= 
Subject of nick registration email
registration_message= 
Message of nick registration email
reset_subject= 
Subject of password reset email
reset_message= 
Message of password reset email
emailchange_subject= 
Subject of email change email
emailchange_message= 
Message of email change email
memo_subject= 
Subject of memo notification email
memo_message= 
Message of memo notification email

Database Module

module {...} 
name= 
Name of module
  • May includ other options such as engine name, and others.

Example Conf

/*
 * Example configuration file for Services. After making the appropriate
 * changes to this file, place it in the Services conf directory (as
 * specified in the "configure" script, default /home/username/services/conf)
 * under the name "services.conf".
 *
 * The format of this file is fairly simple: three types of comments are supported:
 *  - All text after a '#' on a line is ignored, as in shell scripting
 *  - All text after '//' on a line is ignored, as in C++
 *  - A block of text like this one is ignored, as in C
 *
 * Outside of comments, there are three structures: blocks, keys, and values.
 *
 * A block is a named container, which contains a number of key to value pairs
 * - you may think of this as an array.
 *
 * A block is created like so:
 * foobar
 * {
 *    moo = "cow"
 *    foo = bar
 * }
 *
 * Note that nameless blocks are allowed and are often used with comments to allow
 * easily commenting an entire block, for example:
 * #foobar
 * {
 *    moo = "cow"
 *    foo = bar
 * }
 * is an entirely commented block.
 *
 * Keys are case insensitive. Values depend on what key - generally, information is
 * given in the key comment. The quoting of values (and most other syntax) is quite
 * flexible, however, please do not forget to quote your strings:
 *
 *   "This is a parameter string with spaces in it"
 *
 * If you need to include a double quote inside a quoted string, precede it
 * by a backslash:
 *
 *   "This string has \"double quotes\" in it"
 *
 * Time parameters can be specified either as an integer representing a
 * number of seconds (e.g. "3600" = 1 hour), or as an integer with a unit
 * specifier: "s" = seconds, "m" = minutes, "h" = hours, "d" = days.
 * Combinations (such as "1h30m") are not permitted. Examples (all of which
 * represent the same length of time, one day):
 *
 *   "86400", "86400s", "1440m", "24h", "1d"
 *
 * In the documentation for each directive, one of the following will be
 * included to indicate whether an option is required:
 *
 * [REQUIRED]
 *     Indicates a directive which must be given. Without it, Services will
 *     not start.
 *
 * [RECOMMENDED]
 *     Indicates a directive which may be omitted, but omitting it may cause
 *     undesirable side effects.
 *
 * [OPTIONAL]
 *     Indicates a directive which is optional. If not given, the feature
 *     will typically be disabled. If this is not the case, more
 *     information will be given in the documentation.
 *
 * [DISCOURAGED]
 *     Indicates a directive which may cause undesirable side effects if
 *     specified.
 *
 * [DEPRECATED]
 *     Indicates a directive which will disappear in a future version of
 *     Services, usually because its functionality has been either
 *     superseded by that of other directives or incorporated into the main
 *     program.
 */
 
/*
 * [OPTIONAL] Defines
 *
 * You can define values to other values, which can be used to easily change
 * many values in the configuration. at once.
 */
 
/*
 * The services.host define is used in multiple different locations throughout the
 * configuration for services clients hostnames.
 */
define
{
	name = "services.host"
	value = "services.localhost.net"
}
 
/*
 * [OPTIONAL] Additional Includes
 *
 * You can include additional configuration files here.
 * You may also include executable files, which will be executed and
 * the output from it will be included into your configuration.
 */
 
#include
{
	type = "file"
	name = "some.conf"
}
 
#include
{
	type = "executable"
	name = "/usr/bin/wget -q -O - http://some.misconfigured.network.com/services.conf"
}
 
/*
 * [REQUIRED] IRCd Config
 *
 * This section is used to set up Anope to connect to your IRC network.
 * This section can be included multiple times, and Anope will attempt to
 * connect to each server until it finally connects.
 *
 * Each uplink IRCd should have a corresponding configuration to allow Services
 * to link to it.
 *
 * An example configuration for InspIRCd that is compatible with the below uplink
 * and serverinfo configuration would look like:
 *
 *     <link name="services.localhost.net"
 *           ipaddr="127.0.0.1"
 *           port="7000"
 *           sendpass="mypassword"
 *           recvpass="mypassword">
 *     <uline server="services.localhost.net" silent="yes">
 *     <bind address="127.0.0.1" port="7000" type="servers">
 *
 * An example configuration for UnrealIRCd that is compatible with the below uplink
 * and serverinfo configuration would look like:
 *
 *     link services.localhost.net
 *     {
 *          username *;
 *          hostname *;
 *          bind-ip "127.0.0.1";
 *          port 7000;
 *          hub *;
 *          password-connect "mypassword";
 *          password-receive "mypassword";
 *          class servers;
 *     };
 *     ulines { services.localhost.net; };
 *     listen 127.0.0.1:7000;
 */
uplink
{
	/*
	 * The IP or hostname of the IRC server you wish to connect Services to.
	 * Usually, you will want to connect Services over 127.0.0.1 (aka localhost).
	 *
	 * NOTE: On some shell providers, this will not be an option.
	 */
	host = "127.0.0.1"
 
	/*
	 * Enable if Services should connect using IPv6.
	 */
	ipv6 = no
 
	/*
	 * Enable if Services should connect using SSL.
	 * You must have an SSL module loaded for this to work.
	 */
	ssl = no
 
	/*
	 * The port to connect to.
	 * The IRCd *MUST* be configured to listen on this port, and to accept
	 * server connections.
	 *
	 * Refer to your IRCd documentation for how this is to be done.
	 */
	port = 7000
 
	/*
	 * The password to send to the IRC server for authentication.
	 * This must match the link block on your IRCd.
	 *
	 * Refer to your IRCd documentation for more information on link blocks.
	 */
	password = "mypassword"
}
 
/*
 * [REQUIRED] Server Information
 *
 * This section contains information about the Services server.
 */
serverinfo
{
	/*
	 * The hostname that Services will be seen as, it must have no conflicts with any
	 * other server names on the rest of your IRC network. Note that it does not have
	 * to be an existing hostname, just one that isn't on your network already.
	 */
	name = "services.localhost.net"
 
	/*
	 * The text which should appear as the server's information in /whois and similar
	 * queries.
	 */
	description = "Services for IRC Networks"
 
	/*
	 * The local address that Services will bind to before connecting to the remote
	 * server. This may be useful for multihomed hosts. If omitted, Services will let
	 * the Operating System choose the local address. This directive is optional.
	 *
	 * If you don't know what this means or don't need to use it, just leave this
	 * directive commented out.
	 */
	#localhost = "nowhere."
 
	/*
	 * What Server ID to use for this connection?
	 * Note: This should *ONLY* be used for TS6/P10 IRCds. Refer to your IRCd documentation
	 * to see if this is needed.
	 */
	#id = "00A"
 
	/*
	 * The filename containing the Services process ID. The path is relative to the
	 * services root directory.
	 */
	pid = "data/services.pid"
 
	/*
	 * The filename containing the Message of the Day. The path is relative to the
	 * services root directory.
	 */
	motd = "conf/services.motd"
}
 
/*
 * [REQUIRED] Protocol module
 *
 * This directive tells Anope which IRCd Protocol to speak when connecting.
 * You MUST modify this to match the IRCd you run.
 *
 * Supported:
 *  - bahamut
 *  - charybdis
 *  - hybrid
 *  - inspircd12
 *  - inspircd20
 *  - ngircd
 *  - plexus
 *  - ratbox
 *  - unreal
 */
module
{
	name = "inspircd20"
 
	/*
	 * Some protocol modules can enforce mode locks server-side. This reduces the spam caused by
	 * services immediately reversing mode changes for locked modes.
	 *
	 * If the protocol module you have loaded does not support this, this setting will have no effect.
	 */
	use_server_side_mlock = yes
 
	/*
	 * Some protocol modules can enforce topic locks server-side. This reduces the spam caused by
	 * services immediately reversing topic changes.
	 *
	 * If the protocol module you have loaded does not support this, this setting will have no effect.
	 */
	use_server_side_topiclock = yes
}
 
/*
 * [REQUIRED] Network Information
 *
 * This section contains information about the IRC network that Services will be
 * connecting to.
 */
networkinfo
{
	/*
	 * This is the name of the network that Services will be running on.
	 */
	networkname = "LocalNet"
 
	/*
	 * Set this to the maximum allowed nick length on your network.
	 * Be sure to set this correctly, as setting this wrong can result in
	 * Services being disconnected from the network.
	 */
	nicklen = 31
 
	/* Set this to the maximum allowed ident length on your network.
	 * Be sure to set this correctly, as setting this wrong can result in
	 * Services being disconnected from the network.
	 */
	userlen = 10
 
	/* Set this to the maximum allowed hostname length on your network.
	 * Be sure to set this correctly, as setting this wrong can result in
	 * Services being disconnected from the network.
	 */
	hostlen = 64
 
	/* Set this to the maximum allowed channel length on your network.
	 */
	chanlen = 32
 
	/* The maximum number of list modes settable on a channel (such as b, e, I).
	 * Comment out or set to 0 to disable.
	 */
	modelistsize = 100
 
	/*
	 * The characters allowed in hostnames. This is used for validating hostnames given
	 * to services, such as BotServ bot hostnames and user vhosts. Changing this is not
	 * recommended unless you know for sure your IRCd supports whatever characters you are
	 * wanting to use. Telling services to set a vHost containing characters your IRCd
	 * disallows could potentially break the IRCd and/or Services.
	 *
	 * It is recommended you DON'T change this.
	 */
	vhost_chars = "abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-"
 
	/*
	 * If set to true, allows vHosts to not contain dots (.).
	 * Newer IRCds generally do not have a problem with this, but the same warning as
	 * vhost_chars applies.
	 *
	 * It is recommended you DON'T change this.
	 */
	allow_undotted_vhosts = false
 
	/*
	 * The characters that are not allowed to be at the very beginning or very ending
	 * of a vHost. The same warning as vhost_chars applies.
	 *
	 * It is recommended you DON'T change this.
	 */
	disallow_start_or_end = ".-"
}
 
/*
 * [REQUIRED] Services Options
 *
 * This section contains various options which determine how Services will operate.
 */
options
{
	/*
	 * On Linux/UNIX systems Anope can setuid and setgid to this user and group
	 * after starting up. This is useful if Anope has to bind to privileged ports
	 */
	#user = "anope"
	#group = "anope"
 
	/*
	 * The case mapping used by services. This must be set to a valid locale name
	 * installed on your machine. Services use this case map to compare, with
	 * case insensitivity, things such as nick names, channel names, etc.
	 *
	 * We provide two special casemaps shipped with Anope, ascii and rfc1459.
	 *
	 * This value should be set to what your IRCd uses, which is probably rfc1459,
	 * however Anope has always used ascii for comparison, so the default is ascii.
	 *
	 * Changing this value once set is not recommended.
	 */
	casemap = "ascii"
 
	/*
	 * This key is used to initiate the random number generator. This number
	 * MUST be random as you want your passcodes to be random. Don't give this
	 * key to anyone! Keep it private!
	 *
	 * NOTE: If you don't uncomment this or keep the default values, any talented
	 * programmer would be able to easily "guess" random strings used to mask
	 * information. Be safe, and come up with a 7-digit number.
	 *
	 * This directive is optional, but highly recommended.
	 */
	#seed = 9866235
 
	/*
	 * If set, Services will perform more stringent checks on passwords. If this
	 * isn't set, Services will only disallow a password if it is the same as the
	 * entity (nickname name) with which it is associated. When set, however,
	 * Services will also check that the password is at least five
	 * characters long, and in the future will probably check other things
	 * as well.
	 *
	 * This directive is optional, but recommended.
	 */
	strictpasswords = yes
 
	/*
	 * Sets the number of invalid password tries before Services removes a user
	 * from the network. If a user enters a number of invalid passwords equal to
	 * the given amount for any Services function or combination of functions
	 * during a single IRC session (subject to badpasstimeout, below), Services
	 * will issues a /KILL for the user. If not given, Services will ignore
	 * failed password attempts (though they will be logged in any case).
	 *
	 * This directive is optional, but recommended.
	 */
	badpasslimit = 5
 
	/*
	 * Sets the time after which invalid passwords are forgotten about. If a user
	 * does not enter any incorrect passwords in this amount of time, the incorrect
	 * password count will reset to zero. If not given, the timeout will be
	 * disabled, and the incorrect password count will never be reset until the user
	 * disconnects.
	 *
	 * This directive is optional.
	 */
	badpasstimeout = 1h
 
	/*
	 * Sets the delay between automatic database updates.
	 */
	updatetimeout = 5m
 
	/*
	 * Sets the delay between checks for expired nicknames and channels.
	 */
	expiretimeout = 30m
 
	/*
	 * Sets the timeout period for reading from the uplink.
	 */
	readtimeout = 5s
 
	/*
	 * Sets the interval between sending warning messages for program errors via
	 * WALLOPS/GLOBOPS.
	 */
	warningtimeout = 4h
 
	/*
	 * Sets the (maximum) frequency at which the timeout list is checked. This,
	 * combined with readtimeout above, determines how accurately timed events,
	 * such as nick kills, occur; it also determines how much CPU time Services
	 * will use doing this. Higher values will cause less accurate timing but
	 * less CPU usage.
	 *
	 * Note that this value is not an absolute limit on the period between
	 * checks of the timeout list; the previous may be as great as readtimeout
	 * (above) during periods of inactivity.
	 *
	 * If this directive is not given, it will default to 0.
	 */
	timeoutcheck = 3s
 
	/*
	 * If set, this will allow users to let Services send PRIVMSGs to them
	 * instead of NOTICEs. Also see the defmsg option of nickserv:defaults,
	 * which also toggles the default communication (PRIVMSG or NOTICE) to
	 * use for unregistered users.
	 *
	 * This is a feature that is against the IRC RFC and should be used ONLY
	 * if absolutely necessary.
	 *
	 * This directive is optional, and not recommended.
	 */
	#useprivmsg = yes
 
	/*
	 * If set, will force Services to only respond to PRIVMSGs addresses to
	 * Nick@ServerName - e.g. NickServ@localhost.net. This should be used in
	 * conjunction with IRCd aliases. This directive is optional.
	 *
	 * This option will have no effect on some IRCds, such as TS6 IRCds.
	 */
	#usestrictprivmsg = yes
 
	/*
	 * If set, Services will only show /stats o to IRC Operators. This directive
	 * is optional.
	 */
	#hidestatso = yes
 
	/*
	 * A space-separated list of ulined servers on your network, it is assumed that
	 * the servers in this list are allowed to set channel modes and Services will
	 * not attempt to reverse their mode changes.
	 *
	 * WARNING: Do NOT put your normal IRC user servers in this directive.
	 *
	 * This directive is optional.
	 */
	#ulineservers = "stats.your.network"
 
	/*
	 * How long to wait between connection retries with the uplink(s).
	 */
	retrywait = 60s
 
	/*
	 * If set, Services will hide commands that users don't have the privilege to execute
	 * from HELP output.
	 */
	hideprivilegedcommands = yes
 
	/*
	 * If set, Services will hide commands that users can't execute because they are not
	 * logged in from HELP output.
	 */
	hideregisteredcommands = yes
 
	/* The regex engine to use, as provided by the regex modules.
	 * Leave commented to disable regex matching.
	 *
	 * Note for this to work the regex module providing the regex engine must be loaded.
	 */
	regexengine = "regex/pcre"
 
	/*
	 * A list of languages to load on startup that will be available in /nickserv set language.
	 * Useful if you translate Anope to your language. (Explained further in docs/LANGUAGE).
	 * Note that english should not be listed here because it is the base language.
	 *
	 * Removing .UTF-8 will instead use the default encoding for the language, eg. iso-8859-1 for western European languages.
	 */
	languages = "ca_ES.UTF-8 de_DE.UTF-8 el_GR.UTF-8 es_ES.UTF-8 fr_FR.UTF-8 hu_HU.UTF-8 it_IT.UTF-8 nl_NL.UTF-8 pl_PL.UTF-8 pt_PT.UTF-8 ru_RU.UTF-8 tr_TR.UTF-8"
 
	/*
	 * Default language that non- and newly-registered nicks will receive messages in.
	 * Set to "en" to enable English. Defaults to the language the system uses.
	 */
	#defaultlanguage = "es_ES.UTF-8"
}
 
/*
 * [OPTIONAL] BotServ
 *
 * Includes botserv.example.conf, which is necessary for BotServ functionality.
 *
 * Remove this block to disable BotServ.
 */
include
{
	type = "file"
	name = "botserv.example.conf"
}
 
/*
 * [RECOMMENDED] ChanServ
 *
 * Includes chanserv.example.conf, which is necessary for ChanServ functionality.
 *
 * Remove this block to disable ChanServ.
 */
include
{
	type = "file"
	name = "chanserv.example.conf"
}
 
/*
 * [RECOMMENDED] Global
 *
 * Includes global.example.conf, which is necessary for Global functionality.
 *
 * Remove this block to disable Global.
 */
include
{
	type = "file"
	name = "global.example.conf"
}
 
/*
 * [OPTIONAL] HostServ
 *
 * Includes hostserv.example.conf, which is necessary for HostServ functionality.
 *
 * Remove this block to disable HostServ.
 */
include
{
	type = "file"
	name = "hostserv.example.conf"
}
 
/*
 * [OPTIONAL] MemoServ
 *
 * Includes memoserv.example.conf, which is necessary for MemoServ functionality.
 *
 * Remove this block to disable MemoServ.
 */
include
{
	type = "file"
	name = "memoserv.example.conf"
}
 
/*
 * [OPTIONAL] NickServ
 *
 * Includes nickserv.example.conf, which is necessary for NickServ functionality.
 *
 * Remove this block to disable NickServ.
 */
include
{
	type = "file"
	name = "nickserv.example.conf"
}
 
/*
 * [RECOMMENDED] OperServ
 *
 * Includes operserv.example.conf, which is necessary for OperServ functionality.
 *
 * Remove this block to disable OperServ.
 */
include
{
	type = "file"
	name = "operserv.example.conf"
}
 
/*
 * [RECOMMENDED] Logging Configuration
 *
 * This section is used for configuring what is logged and where it is logged to.
 * You may have multiple log blocks if you wish. Remember to properly secure any
 * channels you choose to have Anope log to!
 */
log
{
	/*
	 * Target(s) to log to, which may be one of the following:
	 *   - a channel name
	 *   - a filename
	 *   - globops
	 */
	target = "services.log"
 
	/* Log to both services.log and the channel #services
	 *
	 * Note that some older IRCds, such as Ratbox, require services to be in the
	 * log channel to be able to message it. To do this, configure service:channels to
	 * join your logging channel.
	 */
	#target = "services.log #services"
 
	/*
	 * The source(s) to only accept log messages from. Leave commented to allow all sources.
	 * This can be a users name, a channel name, one of our clients (eg, OperServ), or a server name.
	 */
	#source = ""
 
	/*
	 * The bot used to log generic messages which have no predefined sender if there
	 * is a channel in the target directive.
	 */
	bot = "Global"
 
	/*
	 * The number of days to keep logfiles, only useful if you are logging to a file.
	 * Set to 0 to never delete old logfiles.
	 *
	 * Note that Anope must run 24 hours a day for this feature to work correctly.
	 */
	logage = 7
 
	/*
	 * What types of log messages should be logged by this block. There are nine general categories:
	 *
	 *  admin      - Execution of admin commands (OperServ, etc).
	 *  override   - A services operator using their powers to execute a command they couldn't normally.
	 *  commands   - Execution of general commands.
	 *  servers    - Server actions, linking, squitting, etc.
	 *  channels   - Actions in channels such as joins, parts, kicks, etc.
	 *  users      - User actions such as connecting, disconnecting, changing name, etc.
	 *  other      - All other messages without a category.
	 *  rawio      - Logs raw input and output from services
	 *  debug      - Debug messages (log files can become VERY large from this).
	 *
	 * These options determine what messages from the categories should be logged. Wildcards are accepted, and
	 * you can also negate values with a ~. For example, "~operserv/akill operserv/*" would log all operserv
	 * messages except for operserv/akill. Note that processing stops at the first matching option, which
	 * means "* ~operserv/*" would log everything because * matches everything.
	 *
	 * Valid admin, override, and command options are:
	 *    pesudo-serv/commandname (eg, operserv/akill, chanserv/set)
	 *
	 * Valid server options are:
	 *    connect, quit, sync, squit
	 *
	 * Valid channel options are:
	 *    create, destroy, join, part, kick, leave, mode
	 *
	 * Valid user options are:
	 *    connect, disconnect, quit, nick, ident, host, mode, maxusers, oper
	 *
	 * Rawio and debug are simple yes/no answers, there are no types for them.
	 *
	 * Note that modules may add their own values to these options.
	 */
	admin = "*"
	override = "chanserv/* nickserv/* memoserv/set ~botserv/set botserv/*"
	commands = "~operserv/* *"
	servers = "*"
	#channels = "~mode *"
	users = "connect disconnect nick"
	other = "*"
	rawio = no
	debug = no
}
 
/*
 * A log block to globops some useful things.
 */
log
{
	target = "globops"
	admin = "global/* operserv/mode operserv/kick operserv/akill operserv/s*line operserv/noop operserv/jupe operserv/oline operserv/set operserv/svsnick operserv/svsjoin operserv/svspart nickserv/getpass */drop"
	servers = "squit"
	users = "oper"
	other = "expire/* bados akill/*"
}
 
/*
 * [RECOMMENDED] Oper Access Config
 *
 * This section is used to set up staff access to restricted oper only commands.
 * You may define groups of commands and privileges, as well as who may use them.
 *
 * This block is recommended, as without it you will be unable to access most oper commands.
 * It replaces the old ServicesRoot directive amongst others.
 *
 * The command names below are defaults and are configured in the *serv.conf's. If you configure
 * additional commands with permissions, such as commands from third party modules, the permissions
 * must be included in the opertype block before the command can be used.
 *
 * Available privileges:
 *  botserv/administration        - Can view and assign private BotServ bots
 *  chanserv/administration       - Can modify the settings of any channel (including changing of the owner!)
 *  chanserv/access/modify        - Can modify channel access and akick lists, and use /chanserv enforce
 *  chanserv/auspex               - Can see any information with /chanserv info
 *  chanserv/no-register-limit    - May register an unlimited number of channels and nicknames
 *  chanserv/kick                 - Can kick and ban users from channels through ChanServ
 *  memoserv/info                 - Can see any information with /memoserv info
 *  memoserv/set-limit            - Can set the limit of max stored memos on any user and channel
 *  memoserv/no-limit             - Can send memos through limits and throttles
 *  nickserv/access               - Can modify other users access and certificate lists
 *  nickserv/alist                - Can see the channel access list of other users
 *  nickserv/auspex               - Can see any information with /nickserv info
 *  nickserv/confirm              - Can confirm other users nicknames
 *  nickserv/drop                 - Can drop other users nicks
 *  operserv/config               - Can modify services's configuration
 *  protected                     - Can not be kicked from channels by Services
 *
 * Available commands:
 *   botserv/bot/del          botserv/bot/add               botserv/bot/change        botserv/set/private
 *   botserv/set/nobot
 *
 *   chanserv/access/list     chanserv/drop                 chanserv/getkey           chanserv/invite
 *   chanserv/list            chanserv/suspend              chanserv/topic
 *
 *   chanserv/saset/bantype   chanserv/saset/description    chanserv/saset/email       chanserv/saset/keepmodes
 *   chanserv/saset/founder   chanserv/saset/keeptopic      chanserv/saset/restricted
 *   chanserv/saset/peace     chanserv/saset/persist        chanserv/saset/private
 *   chanserv/saset/secure    chanserv/saset/securefounder  chanserv/saset/secureops
 *   chanserv/saset/signkick  chanserv/saset/successor      chanserv/saset/topiclock
 *   chanserv/saset/url       chanserv/saset/noexpire       chanserv/saset/autoop
 *
 *   memoserv/sendall        memoserv/staff
 *
 *   nickserv/getpass        nickserv/getemail      nickserv/suspend      nickserv/ajoin
 *   nickserv/list
 *
 *   nickserv/saset/autoop     nickserv/saset/email   nickserv/saset/greet     nickserv/saset/password
 *   nickserv/saset/display    nickserv/saset/kill    nickserv/saset/language  nickserv/saset/message
 *   nickserv/saset/private    nickserv/saset/secure  nickserv/saset/url       nickserv/saset/noexpire
 *   nickserv/saset/keepmodes
 *
 *   hostserv/set            hostserv/del           hostserv/list
 *
 *   global/global
 *
 *   operserv/news         operserv/stats        operserv/kick       operserv/exception    operserv/seen
 *   operserv/mode         operserv/session      operserv/modinfo    operserv/ignore       operserv/chanlist
 *   operserv/chankill     operserv/akill        operserv/sqline     operserv/snline       operserv/userlist
 *   operserv/oper         operserv/config       operserv/umode      operserv/logsearch
 *   operserv/modload      operserv/jupe         operserv/set        operserv/noop
 *   operserv/quit         operserv/update       operserv/reload     operserv/restart
 *   operserv/shutdown     operserv/svs          operserv/oline      operserv/kill
 *
 * Firstly, we define 'opertypes' which are named whatever we want ('Network Administrator', etc).
 * These can contain commands for oper-only strings (see above) which grants access to that specific command,
 * and privileges (which grant access to more general permissions for the named area).
 * Wildcard entries are permitted for both, e.g. 'commands = "operserv/*"' for all OperServ commands.
 *
 * Below are some default example types, but this is by no means exhaustive,
 * and it is recommended that you configure them to your needs.
 */
 
opertype
{
	/* The name of this opertype */
	name = "Helper"
 
	/* What commands (see above) this opertype has */
	commands = "hostserv/*"
}
 
opertype
{
	/* The name of this opertype */
	name = "Services Operator"
 
	/* What opertype(s) this inherits from. Seperate with a comma. */
	inherits = "Helper, Another Helper"
 
	/* What commands (see above) this opertype may use */
	commands = "chanserv/list chanserv/suspend chanserv/topic memoserv/staff nickserv/list nickserv/suspend operserv/mode operserv/chankill operserv/akill operserv/session operserv/modinfo operserv/sqline operserv/oper operserv/kick operserv/ignore operserv/snline"
 
	/* What privs (see above) this opertype has */
	privs = "chanserv/auspex chanserv/no-register-limit memoserv/* nickserv/auspex nickserv/confirm"
 
	/*
	 * Modes to be set on users when they identify to accounts linked to this opertype.
	 *
	 * This can be used to automatically oper users who identify for services operator accounts, and is
	 * useful for setting modes such as Plexus's user mode +N.
	 *
	 * Note that some IRCds, such as InspIRCd, do not allow directly setting +o, and this will not work.
	 */
	#modes = "+o"
}
 
opertype
{
	name = "Services Administrator"
 
	inherits = "Services Operator"
 
	commands = "chanserv/access/list chanserv/drop chanserv/getkey chanserv/saset/noexpire memoserv/sendall nickserv/saset/* nickserv/getemail operserv/news operserv/jupe operserv/svs operserv/stats operserv/oline operserv/noop operserv/forbid global/*"
 
	privs = "*"
}
 
opertype
{
	name = "Services Root"
 
	commands = "*"
 
	privs = "*"
}
 
/*
 * After defining different types of operators in the above opertype section, we now define who is in these groups
 * through 'oper' blocks, similar to ircd access.
 *
 * The default is to comment these out (so NOBODY will have Services access).
 * You probably want to add yourself and a few other people at minimum.
 *
 * As with all permissions, make sure to only give trustworthy people access to Services.
 */
 
#oper
{
	/* The nickname of this services oper */
	#name = "nick1"
 
	/* The opertype this person will have */
	type = "Services Root"
 
	/* If set, the user must be an oper on the IRCd to gain their Services
	 * oper privileges.
	 */
	require_oper = yes
 
	/* An optional password. If defined the user must login using "/msg OperServ LOGIN" first */
	#password = "secret"
 
	/* An optional SSL fingerprint. If defined, it's required to be able to use this opertype. */
	#certfp = "ed3383b3f7d74e89433ddaa4a6e5b2d7"
 
	/* An optional list of user@host masks. If defined the user must be connected from one of them */
	#host = "*@*.anope.org ident@*"
 
	/* An optional vHost to set on users who identify for this oper block.
	 * This will override HostServ vHosts, and may not be available on all IRCds
	 */
	#vhost = "oper.mynet"
}
 
#oper
{
	name = "nick2"
	type = "Services Administrator"
}
 
#oper
{
	name = "nick3"
	type = "Helper"
}
 
/*
 * [OPTIONAL] Mail Config
 *
 * This section contains settings related to the use of e-mail from Services.
 * If the usemail directive is set to yes, unless specified otherwise, all other
 * directives are required.
 *
 * NOTE: Users can find the IP of the machine services is running on by examining
 * mail headers. If you do not want your IP known, you should set up a mail relay
 * to strip the relevant headers.
 */
mail
{
	/*
	 * If set, this option enables the mail commands in Services. You may choose
	 * to disable it if you have no Sendmail-compatible mailer installed. Whilst
	 * this directive (and entire block) is optional, it is required if
	 * nickserv:registration is set to yes.
	 */
	usemail = yes
 
	/*
	 * This is the command-line that will be used to call the mailer to send an
	 * e-mail. It must be called with all the parameters needed to make it
	 * scan the mail input to find the mail recipient; consult your mailer
	 * documentation.
	 *
	 * Postfix users must use the compatible sendmail utility provided with
	 * it. This one usually needs no parameters on the command-line. Most
	 * sendmail applications (or replacements of it) require the -t option
	 * to be used.
	 */
	sendmailpath = "/usr/sbin/sendmail -t"
 
	/*
	 * This is the e-mail address from which all the e-mails are to be sent from.
	 * It should really exist.
	 */
	sendfrom = "services@localhost.net"
 
	/*
	 * This controls the minimum amount of time a user must wait before sending
	 * another e-mail after they have sent one. It also controls the minimum time
	 * a user must wait before they can receive another e-mail.
	 *
	 * This feature prevents users from being mail bombed using Services and
	 * it is highly recommended that it be used.
	 *
	 * This directive is optional, but highly recommended.
	 */
	delay = 5m
 
	/*
	 * If set, Services will not attempt to put quotes around the TO: fields
	 * in e-mails.
	 *
	 * This directive is optional, and as far as we know, it's only needed
	 * if you are using ESMTP or QMail to send out e-mails.
	 */
	#dontquoteaddresses = yes
 
	/*
	 * The subject and message of emails sent to users when they register accounts.
	 */
	registration_subject = "Nickname registration for %n"
	registration_message = "Hi,
 
				You have requested to register the nickname %n on %N.
				Please type \" /msg NickServ CONFIRM %c \" to complete registration.
 
				If you don't know why this mail was sent to you, please ignore it silently.
 
				%N administrators."
 
	/*
	 * The subject and message of emails sent to users when they request a new password.
	 */
	reset_subject = "Reset password request for %n"
	reset_message = "Hi,
 
			You have requested to have the password for %n reset.
			To reset your password, type \" /msg NickServ CONFIRM %n %c \"
 
			If you don't know why this mail was sent to you, please ignore it silently.
 
			%N administrators."
 
	/*
	 * The subject and message of emails sent to users when they request a new email address.
	 */
	emailchange_subject = "Email confirmation"
	emailchange_message = "Hi,
 
			You have requested to change your email address to %e.
			Please type \" /msg NickServ CONFIRM %c \" to confirm this change.
 
			If you don't know why this mail was sent to you, please ignore it silently.
 
			%N administrators."
 
	/*
	 * The subject and message of emails sent to users when they receive a new memo.
	 */
	memo_subject = "New memo"
	memo_message = "Hi %n,
 
			You've just received a new memo from %s. This is memo number %d.
 
			Memo text:
 
			%t"
}
 
/*
 * [REQUIRED] Database configuration.
 *
 * This section is used to configure databases used by Anope.
 * You should at least load one database method, otherwise any data you
 * have will not be stored!
 */
 
/*
 * [DEPRECATED] db_old
 *
 * This is the old binary database format from late Anope 1.7.x, Anope 1.8.x, and
 * early Anope 1.9.x. This module only loads these databases, and will NOT save them.
 * You should only use this to upgrade old databases to a newer database format by loading
 * other database modules in addition to this one, which will be used when saving databases.
 */
#module
{
	name = "db_old"
 
	/*
	 * This is the encryption type used by the databases. This must be set correctly or
	 * your passwords will not work. Valid options are: md5, oldmd5, sha1, and plain.
	 * You must also be sure to load the correct encryption module below in the Encryption
	 * Modules section so that your passwords work.
	 */
	#hash = "md5"
}
 
/*
 * [RECOMMENDED] db_flatfile
 *
 * This is the default flatfile database format.
 */
module
{
	name = "db_flatfile"
 
	/*
	 * The database name db_flatfile should use
	 */
	database = "anope.db"
 
	/*
	 * Sets the number of days backups of databases are kept. If you don't give it,
	 * or if you set it to 0, Services won't backup the databases.
	 *
	 * NOTE: Services must run 24 hours a day for this feature to work.
	 *
	 * This directive is optional, but recommended.
	 */
	keepbackups = 3
 
	/*
	 * Allows Services to continue file write operations (i.e. database saving)
	 * even if the original file cannot be backed up. Enabling this option may
	 * allow Services to continue operation under conditions where it might
	 * otherwise fail, such as a nearly-full disk.
	 *
	 * NOTE: Enabling this option can cause irrecoverable data loss under some
	 * conditions, so make CERTAIN you know what you're doing when you enable it!
	 *
	 * This directive is optional, and you are discouraged against enabling it.
	 */
	#nobackupokay = yes
 
	/*
	 * If enabled, services will fork a child process to save databases.
	 *
	 * This is only useful with very large databases, with hundreds
	 * of thousands of objects, that have a noticeable delay from
	 * writing databases.
	 *
	 * If your database is large enough cause a noticeable delay when
	 * saving you should consider a more powerful alternative such
	 * as db_sql or db_redis, which incrementally update their
	 * databases asynchronously in real time.
	 */
	fork = no
}
 
/*
 * db_sql and db_sql_live
 *
 * db_sql module allows saving and loading databases using one of the SQL engines.
 * This module loads the databases once on startup, then incrementally updates
 * objects in the database as they are changed within Anope in real time. Changes
 * to the SQL tables not done by Anope will have no effect and will be overwritten.
 *
 * db_sql_live module allows saving and loading databases using one of the SQL engines.
 * This module reads and writes to SQL in real time. Changes to the SQL tables
 * will be immediately reflected into Anope. This module should not be loaded
 * in conjunction with db_sql.
 *
 */
#module
{
	name = "db_sql"
	#name = "db_sql_live"
 
	/*
	 * The SQL service db_sql(_live) should use, these are configured in modules.conf.
	 * For MySQL, this should probably be mysql/main.
	 */
	engine = "sqlite/main"
 
	/*
	 * An optional prefix to prepended to the name of each created table.
	 * Do not use the same prefix for other programs.
	 */
	#prefix = "anope_db_"
 
	/* Whether or not to import data from another database module in to SQL on startup.
	 * If you enable this, be sure that the database services is configured to use is
	 * empty and that another database module to import from is loaded before db_sql.
	 * After you enable this and do a database import you should disable it for
	 * subsequent restarts.
	 *
	 * Note that you can not import databases using db_sql_live. If you want to import
	 * databases and use db_sql_live you should import them using db_sql, then shut down
	 * and start services with db_sql_live.
	 */
	import = false
}
 
/*
 * db_redis.
 *
 * This module allows using Redis (http://redis.io) as a database backend.
 * This module requires that m_redis is loaded and configured properly.
 *
 * Redis 2.8 supports keyspace notifications which allows Redis to push notifications
 * to Anope about outside modifications to the database. This module supports this and
 * will internally reflect any changes made to the database immediately once notified.
 * See docs/REDIS for more information regarding this.
 */
#module
{
	name = "db_redis"
 
	/*
	 * Redis database to use. This must be configured with m_redis.
	 */
	engine = "redis/main"
}
 
/*
 * [RECOMMENDED] Encryption modules.
 *
 * The encryption modules are used when dealing with passwords. This determines how
 * the passwords are stored in the databases, and does not add any security as
 * far as transmitting passwords over the network goes.
 *
 * Without any encryption modules loaded users will not be able to authenticate unless
 * there is another module loaded that provides authentication checking, such as
 * m_ldap_authentication or m_sql_authentication.
 *
 * With enc_none, passwords will be stored in plain text, allowing for passwords
 * to be recovered later but it isn't secure and therefore is not recommended.
 *
 * The other encryption modules use one-way encryption, so the passwords can not
 * be recovered later if those are used.
 *
 * The first encryption module loaded is the primary encryption module. All new passwords are
 * encrypted by this module. Old passwords stored in another encryption method are
 * automatically re-encrypted by the primary encryption module on next identify.
 *
 * NOTE: enc_old is Anope's previous (broken) MD5 implementation which is present in
 * versions prior to Anope 1.7.17. If your databases were made using that module,
 * use this and not enc_md5.
 *
 * NOTE: enc_sha1 relies on how the OS stores 2+ byte data internally, and is
 * potentially broken when moving between 2 different OSes, such as moving from
 * Linux to Windows. It is recommended that you use enc_sha256 instead if you want
 * to use an SHA-based encryption. If you choose to do so, it is also recommended
 * that you first try to get everyone's passwords converted to enc_sha256 before
 * switching OSes by placing enc_sha256 at the beginning of the list.
 *
 */
 
#module { name = "enc_bcrypt" }
module { name = "enc_sha256" }
#module { name = "enc_md5" }
#module { name = "enc_sha1" }
 
/*
 * When using enc_none, passwords will be stored without encryption. This isn't secure
 * therefore it is not recommended.
 */
#module { name = "enc_none" }
 
/*
 * enc_old is Anope's previous (broken) MD5 implementation used from 1.4.x to 1.7.16.
 * If your databases were made using that module, load it here to allow conversion to the primary
 * encryption method.
 */
#module { name = "enc_old" }
 
 
/* Extra (optional) modules. */
include
{
	type = "file"
	name = "modules.example.conf"
}
 
/*
 * Chanstats module.
 * Requires a MySQL Database.
 */
#include
{
	type = "file"
	name = "chanstats.example.conf"
}
 
/*
 * IRC2SQL Gateway
 * This module collects data about users, channels and servers. It doesn't build stats
 * itself, however, it gives you the database, it's up to you how you use it.
 *
 * Requires a MySQL Database and MySQL version 5.5 or higher
 */
#include
{
	type = "file"
	name = "irc2sql.example.conf"
}

Services Configuration

NickServ

/*
 * Example configuration file for NickServ.
 */
 
/*
 * First, create the service.
 */
service
{
	/*
	 * The name of the NickServ client.
	 * If you change this value, you probably want to change the client directive in the configuration for the nickserv module too.
	 */
	nick = "NickServ"
 
	/*
	 * The username of the NickServ client.
	 */
	user = "services"
 
	/*
	 * The hostname of the NickServ client.
	 */
	host = "services.host"
 
	/*
	 * The realname of the NickServ client.
	 */
	gecos = "Nickname Registration Service"
 
	/*
	 * The modes this client should use.
	 * Do not modify this unless you know what you are doing.
	 *
	 * These modes are very IRCd specific. If left commented, sane defaults
	 * are used based on what protocol module you have loaded.
	 *
	 * Note that setting this option incorrectly could potentially BREAK some, if
	 * not all, usefulness of the client. We will not support you if this client is
	 * unable to do certain things if this option is enabled.
	 */
	#modes = "+o"
 
	/*
	 * An optional comma separated list of channels this service should join. Outside
	 * of log channels this is not very useful, as the service will just idle in the
	 * specified channels, and will not accept any types of commands.
	 *
	 * Prefixes may be given to the channels in the form of mode characters or prefix symbols.
	 */
	#channels = "@#services,#mychan"
}
 
/*
 * Core NickServ module.
 *
 * Provides essential functionality for NickServ.
 */
module
{
	name = "nickserv"
 
	/*
	 * The name of the client that should be NickServ.
	 */
	client = "NickServ"
 
	/*
	 * Force users to give an e-mail address when they register a nick.
	 *
	 * This directive defaults to "yes" and is recommended to be enabled. This is required if e-mail registration is enabled.
	 */
	forceemail = yes
 
	/*
	 * Require users who change their email address to confirm they
	 * own their new email.
	 */
	confirmemailchanges = no
 
	/*
	 * A message sent to users on connect if they use an unregistered nick.
	 *
	 * This directive is optional.
	 */
	#unregistered_notice = "Your nickname is not registered. To register it, use: /msg NickServ REGISTER password email"
 
	/*
	 * The default options for newly registered nicks. Note that changing these options
	 * will have no effect on nicks which are already registered. The list must be separated
	 * by spaces.
	 *
	 * The options are:
	 * -   killprotect: Kill nick if not identified within 60 seconds
	 * -    kill_quick: Kill nick if not identified within 20 seconds, this one overrides the above
	 *                    option and the above must be specified with this one
	 * -     ns_secure: Enable nickname security, requiring the nick's password before any operations
	 *                    can be done on it
	 * -    ns_private: Hide the nick from NickServ's LIST command
	 * -    hide_email: Hide's the nick's e-mail address from NickServ's INFO command
	 * -     hide_mask: Hide's the nick's last or current user@host from NickServ's INFO command
	 * -     hide_quit: Hide's the nick's last quit message
	 * -   memo_signon: Notify user if they have a new memo when they sign into the nick
	 * -  memo_receive: Notify user if they have a new memo as soon as it's received
	 * -     memo_mail: Notify user if they have a new memo by mail
	 * -        autoop: User will be automatically opped in channels they enter and have access to
	 * -           msg: Services messages will be sent as PRIVMSGs instead of NOTICEs, requires
	 *                    options:useprivmsg to be enabled as well
	 * -  ns_keepmodes: Enables keepmodes, which retains user modes across sessions
	 *
	 * This directive is optional, if left blank, the options will default to ns_secure, memo_signon, and
	 * memo_receive. If you really want no defaults, use "none" by itself as the option.
	 */
	defaults = "ns_secure ns_private hide_email hide_mask memo_signon memo_receive autoop"
 
	/*
	 * The minimum length of time between consecutive uses of NickServ's REGISTER command. This
	 * directive is optional, but recommended. If not set, this restriction will be disabled.
	 */
	regdelay = 30s
 
	/*
	 * The length of time before a nick's registration expires.
	 *
	 * This directive is optional, but recommended. If not set, the default is 21 days.
	 */
	expire = 21d
 
	/*
	 * Prevents the use of the ACCESS and CERT (excluding their LIST subcommand), DROP, FORBID, SUSPEND,
	 * GETPASS and SET PASSWORD commands by services operators on other services operators.
	 *
	 * This directive is optional, but recommended.
	 */
	secureadmins = yes
 
	/*
	 * If set, Services will set the channel modes a user has access to upon identifying, assuming
	 * they are not already set.
	 *
	 * This directive is optional.
	 */
	modeonid = yes
 
	/*
	 * If set, Services will set these user modes on any user who identifies.
	 *
	 * This directive is optional.
	 */
	#modesonid = "+R"
 
	/*
	 * If set, Services will not show netsplits in the last quit message field
	 * of NickServ's INFO command.
	 */
	hidenetsplitquit = no
 
	/*
	 * If set, is the length of time NickServ's killquick and kill options wait before
	 * forcing users off of protected nicknames.
	 */
	killquick = 20s
	kill = 60s
 
	/*
	 * If set, forbids the registration of nicks that contain an existing
	 * nick with Services access. For example, if Tester is a Services Oper,
	 * you can't register NewTester or Tester123 unless you are an IRC
	 * Operator.
	 *
	 * NOTE: If you enable this, you will have to be logged in as an IRC
	 * operator in order to register a Services Root nick when setting up
	 * Anope for the first time.
	 *
	 * This directive is optional.
	 */
	#restrictopernicks = yes
 
	/*
	 * The username, and possibly hostname, used for fake users created when Services needs to
	 * hold a nickname.
	 */
	enforceruser = "enforcer"
	enforcerhost = "services.host"
 
	/*
	 * The length of time Services hold nicknames.
	 *
	 * This directive is optional, but recommended. If not set it defaults to 1 minute.
	 */
	releasetimeout = 1m
 
	/*
	 * When a user's nick is forcibly changed to enforce a "nick kill", their new nick will start
	 * with this value. The rest will be made up of 6 or 7 digits.
	 * Make sure this is a valid nick and Nicklen+7 is not longer than the allowed Nicklen on your ircd.
	 *
	 * This directive is optional. If not set it defaults to "Guest"
	 */
	guestnickprefix = "Guest"
 
	/*
	 * If set, Services do not allow ownership of nick names, only ownership of accounts.
	 */
	nonicknameownership = no
 
	/*
	 * The maximum length of passwords
	 *
	 * This directive is optional. If not set it defaults to 32.
	 */
	passlen = 32
}
 
/*
 * Core NickServ commands.
 *
 * In Anope modules can provide (multiple) commands, each of which has a unique command name. Once these modules
 * are loaded you can then configure the commands to be added to any client you like with any name you like.
 *
 * Additionally, you may provide a permission name that must be in the opertype of users executing the command.
 *
 * Sane defaults are provided below that do not need to be edited unless you wish to change the default behavior.
 */
 
/* Command group configuration for NickServ.
 *
 * Commands may optionally be placed into groups to make NickServ's HELP output easier to understand.
 * Remove the following groups to use the old behavior of simply listing all NickServ commands from HELP.
 */
command_group
{
	name = "nickserv/admin"
	description = _("Services Operator commands")
}
 
/* Give it a help command. */
command { service = "NickServ"; name = "HELP"; command = "generic/help"; }
 
/*
 * ns_access
 *
 * Provides the command nickserv/access.
 *
 * Used for configuring what hosts have access to your account.
 */
module
{
	name = "ns_access"
 
	/*
	 * The maximum number of entries allowed on a nickname's access list.
	 * If not set, the default is 32. This number cannot be set to 0.
	 */
	accessmax = 32
 
	/*
	 * If set, Services will add the usermask of registering users to the access list of their
	 * newly created account. If not set, users will always have to identify to NickServ before
	 * being recognized, unless they manually add an address to the access list of their account.
	 * This directive is optional.
	 */
	addaccessonreg = yes
}
command { service = "NickServ"; name = "ACCESS"; command = "nickserv/access"; }
 
/*
 * ns_ajoin
 *
 * Provides the command nickserv/ajoin.
 *
 * Used for configuring channels to join once you identify.
 */
module
{
	name = "ns_ajoin"
 
	/*
	 * The maximum number of channels a user can have on NickServ's AJOIN command.
	 */
	ajoinmax = 10
}
command { service = "NickServ"; name = "AJOIN"; command = "nickserv/ajoin"; }
 
/*
 * ns_alist
 *
 * Provides the command nickserv/alist.
 *
 * Used for viewing what channels you have access to.
 */
module { name = "ns_alist" }
command { service = "NickServ"; name = "ALIST"; command = "nickserv/alist"; }
 
/*
 * ns_cert
 *
 * Provides the command nickserv/cert.
 *
 * Used for configuring your SSL certificate list, which can be used to automatically identify you.
 */
module
{
	name = "ns_cert"
 
	/*
	 * The maximum number of entries allowed on a nickname's certificate fingerprint list.
	 * The default is 5. This number cannot be set to 0.
	 */
	max = 5
}
command { service = "NickServ"; name = "CERT"; command = "nickserv/cert"; }
 
/*
 * ns_drop
 *
 * Provides the command nickserv/drop.
 *
 * Used for unregistering names.
 */
module { name = "ns_drop" }
command { service = "NickServ"; name = "DROP"; command = "nickserv/drop"; }
 
/*
 * ns_getemail
 *
 * Provides the command nickserv/getemail.
 *
 * Used for getting registered accounts by searching for emails.
 */
module { name = "ns_getemail" }
command { service = "NickServ"; name = "GETEMAIL"; command = "nickserv/getemail"; permission = "nickserv/getemail"; group = "nickserv/admin"; }
 
/*
 * ns_getpass
 *
 * Provides the command nickserv/getpass.
 *
 * Used for getting users passwords.
 *
 * Requires no encryption is being used.
 */
#module { name = "ns_getpass" }
#command { service = "NickServ"; name = "GETPASS"; command = "nickserv/getpass"; permission = "nickserv/getpass"; }
 
/*
 * ns_group
 *
 * Provides the commands nickserv/group, nickserv/glist, and nickserv/ungroup.
 *
 * Used for controlling nick groups.
 */
module
{
	name = "ns_group"
 
	/*
	 * The maximum number of nicks allowed in a group.
	 *
	 * This directive is optional, but recommended. If not set or set to 0, no limits will be applied.
	 */
	maxaliases = 16
 
	/*
	 * If set, the NickServ GROUP command won't allow any group changes. This is recommended to
	 * prevent users from accidentally dropping their nicks, as it forces users to explicitly
	 * drop their nicks before adding it to another group.
	 *
	 * This directive is optional, but recommended.
	 */
	nogroupchange = yes
}
command { service = "NickServ"; name = "GLIST"; command = "nickserv/glist"; }
command { service = "NickServ"; name = "GROUP"; command = "nickserv/group"; }
command { service = "NickServ"; name = "UNGROUP"; command = "nickserv/ungroup"; }
 
/*
 * ns_identify
 *
 * Provides the command nickserv/identify.
 *
 * Used for identifying to accounts.
 */
module { name = "ns_identify" }
command { service = "NickServ"; name = "ID"; command = "nickserv/identify"; hide = true; }
command { service = "NickServ"; name = "IDENTIFY"; command = "nickserv/identify"; }
 
/*
 * ns_info
 *
 * Provides the commands:
 * nickserv/info. - Used for gathering information about an account.
 * nickserv/set/hide, nickserv/saset/hide - Used for configuring which options are publically shown in nickserv/info.
 *
 */
module { name = "ns_info" }
command { service = "NickServ"; name = "INFO"; command = "nickserv/info"; }
 
command { service = "NickServ"; name = "SET HIDE"; command = "nickserv/set/hide"; }
command { service = "NickServ"; name = "SASET HIDE"; command = "nickserv/saset/hide"; permission = "nickserv/saset/hide"; }
 
 
/*
 * ns_list
 *
 * Provides the commands:
 *   nickserv/list - Used for retrieving and searching the registered account list.
 *   nickserv/set/private, nickserv/saset/private - Used for configuring whether or a users account shows up in nickserv/list.
 *
 */
module
{
	name = "ns_list"
 
	/*
	 * The maximum number of nicks to be returned for a NickServ LIST command.
	 */
	listmax = 50
}
command { service = "NickServ"; name = "LIST"; command = "nickserv/list"; }
 
command { service = "NickServ"; name = "SET PRIVATE"; command = "nickserv/set/private"; }
command { service = "NickServ"; name = "SASET PRIVATE"; command = "nickserv/saset/private"; permission = "nickserv/saset/private"; }
 
 
/*
 * ns_logout
 *
 * Provides the command nickserv/logout.
 *
 * Used for logging out of your account.
 */
module { name = "ns_logout" }
command { service = "NickServ"; name = "LOGOUT"; command = "nickserv/logout"; }
 
/*
 * ns_recover
 *
 * Provides the command nickserv/recover.
 *
 * Used for recovering your nick from services or another user.
 */
module
{
	name = "ns_recover"
 
	/*
	 * If set, Services will svsnick and svsjoin users who use the recover
	 * command on an identified user to the nick and channels of the recovered user.
	 *
	 * This directive is opional.
	 */
	restoreonrecover = yes
}
command { service = "NickServ"; name = "RECOVER"; command = "nickserv/recover"; }
# Uncomment below to emulate 1.8's behavior of ghost and release.
#command { service = "NickServ"; name = "GHOST"; command = "nickserv/recover"; }
#command { service = "NickServ"; name = "RELEASE"; command = "nickserv/recover"; }
 
/*
 * ns_register
 *
 * Provides the commands nickserv/confirm, nickserv/register, and nickserv/resend.
 *
 * Used for registering accounts.
 */
module
{
	name = "ns_register"
 
	/*
	 * Registration confirmation setting. Set to "none" for no registration confirmation,
	 * "mail" for email confirmation, and "admin" to have services operators manually confirm
	 * every registration. Set to "disable" to completely disable all registrations.
	 */
	registration = "none"
 
	/*
	 * The minimum length of time between consecutive uses of NickServ's RESEND command.
	 *
	 * This directive is optional, but recommended. If not set, this restriction will be disabled.
	 */
	resenddelay = 90s
 
	/*
	 * Prevents users from registering their nick if they are not connected
	 * for at least the given number of seconds.
	 *
	 * This directive is optional.
	 */
	#nickregdelay = 30s
 
	/*
	 * The length of time a user using an unconfirmed account has
	 * before the account will be released for general use again.
	 */
	#unconfirmedexpire = 1d
}
command { service = "NickServ"; name = "CONFIRM"; command = "nickserv/confirm"; }
command { service = "NickServ"; name = "REGISTER"; command = "nickserv/register"; }
command { service = "NickServ"; name = "RESEND"; command = "nickserv/resend"; }
 
/*
 * ns_resetpass
 *
 * Provides the command nickserv/resetpass.
 *
 * Used for resetting passwords by emailing users a temporary one.
 */
module { name = "ns_resetpass" }
command { service = "NickServ"; name = "RESETPASS"; command = "nickserv/resetpass"; }
 
/*
 * ns_set
 *
 * Provides the commands:
 *   nickserv/set, nickserv/saset - Dummy help wrappers for the SET and SASET commands.
 *   nickserv/set/autoop, nickserv/saset/autoop - Determines whether or not modes are automatically set users when joining a channel.
 *   nickserv/set/display, nickserv/saset/display - Used for setting a users display name.
 *   nickserv/set/email, nickserv/saset/email - Used for setting a users email address.
 *   nickserv/set/keepmodes, nickserv/saset/keepmodes - Configure whether or not services should retain a user's modes across sessions.
 *   nickserv/set/kill, nickserv/saset/kill - Used for configuring nickname protection.
 *   nickserv/set/language, nickserv/saset/language - Used for configuring what language services use.
 *   nickserv/set/message, nickserv/saset/message - Used to configure how services send messages to you.
 *   nickserv/set/password, nickserv/saset/password  - Used for changing a users password.
 *   nickserv/set/secure, nickserv/saset/secure - Used for configuring whether a user can identify by simply being recognized by nickserv/access.
 *   nickserv/saset/noexpire - Used for configuring noexpire, which prevents nicks from expiring.
 */
module
{
	name = "ns_set"
 
	/*
	 * Allow the use of the IMMED option in the NickServ SET KILL command.
	 *
	 * This directive is optional.
	 */
	#allowkillimmed = yes
}
 
command { service = "NickServ"; name = "SET"; command = "nickserv/set"; }
command { service = "NickServ"; name = "SASET"; command = "nickserv/saset"; permission = "nickserv/saset/"; group = "nickserv/admin"; }
 
command { service = "NickServ"; name = "SET AUTOOP"; command = "nickserv/set/autoop"; }
command { service = "NickServ"; name = "SASET AUTOOP"; command = "nickserv/saset/autoop"; permission = "nickserv/saset/autoop"; }
 
command { service = "NickServ"; name = "SET DISPLAY"; command = "nickserv/set/display"; }
command { service = "NickServ"; name = "SASET DISPLAY"; command = "nickserv/saset/display"; permission = "nickserv/saset/display"; }
 
command { service = "NickServ"; name = "SET EMAIL"; command = "nickserv/set/email"; }
command { service = "NickServ"; name = "SASET EMAIL"; command = "nickserv/saset/email"; permission = "nickserv/saset/email"; }
 
command { service = "NickServ"; name = "SET KEEPMODES"; command = "nickserv/set/keepmodes"; }
command { service = "NickServ"; name = "SASET KEEPMODES"; command = "nickserv/saset/keepmodes"; permission = "nickserv/saset/keepmodes"; }
 
command { service = "NickServ"; name = "SET KILL"; command = "nickserv/set/kill"; }
command { service = "NickServ"; name = "SASET KILL"; command = "nickserv/saset/kill"; permission = "nickserv/saset/kill"; }
 
command { service = "NickServ"; name = "SET LANGUAGE"; command = "nickserv/set/language"; }
command { service = "NickServ"; name = "SASET LANGUAGE"; command = "nickserv/saset/language"; permission = "nickserv/saset/language"; }
 
command { service = "NickServ"; name = "SET MESSAGE"; command = "nickserv/set/message"; }
command { service = "NickServ"; name = "SASET MESSAGE"; command = "nickserv/saset/message"; permission = "nickserv/saset/message"; }
 
command { service = "NickServ"; name = "SET PASSWORD"; command = "nickserv/set/password"; }
command { service = "NickServ"; name = "SASET PASSWORD"; command = "nickserv/saset/password"; permission = "nickserv/saset/password"; }
 
command { service = "NickServ"; name = "SET SECURE"; command = "nickserv/set/secure"; }
command { service = "NickServ"; name = "SASET SECURE"; command = "nickserv/saset/secure"; permission = "nickserv/saset/secure"; }
 
command { service = "NickServ"; name = "SASET NOEXPIRE"; command = "nickserv/saset/noexpire"; permission = "nickserv/saset/noexpire"; }
 
 
/*
 * ns_set_misc
 *
 * Provides the command nickserv/set/misc.
 *
 * Allows you to create arbitrary commands to set data, and have that data show up in nickserv/info.
 * A field named misc_description may be given for use with help output.
 */
module { name = "ns_set_misc" }
command { service = "NickServ"; name = "SET URL"; command = "nickserv/set/misc"; misc_description = _("Associate a URL with your account"); }
command { service = "NickServ"; name = "SASET URL"; command = "nickserv/saset/misc"; misc_description = _("Associate a URL with this account"); permission = "nickserv/saset/url"; group = "nickserv/admin"; }
#command { service = "NickServ"; name = "SET ICQ"; command = "nickserv/set/misc"; misc_description = _("Associate an ICQ account with your account"); }
#command { service = "NickServ"; name = "SASET ICQ"; command = "nickserv/saset/misc"; misc_description = _("Associate an ICQ account with this account"); permission = "nickserv/saset/icq"; group = "nickserv/admin"; }
#command { service = "NickServ"; name = "SET TWITTER"; command = "nickserv/set/misc"; misc_description = _("Associate a Twitter account with your account"); }
#command { service = "NickServ"; name = "SASET TWITTER"; command = "nickserv/saset/misc"; misc_description = _("Associate a Twitter account with this account"); permission = "nickserv/saset/twitter"; group = "nickserv/admin"; }
#command { service = "NickServ"; name = "SET FACEBOOK"; command = "nickserv/set/misc"; misc_description = _("Associate a Facebook URL with your account"); }
#command { service = "NickServ"; name = "SASET FACEBOOK"; command = "nickserv/saset/misc"; misc_description = _("Associate a Facebook URL with this account"); permission = "nickserv/saset/facebook"; group = "nickserv/admin"; }
 
/*
 * ns_status
 *
 * Provides the nickserv/status command.
 *
 * Used to determine if a user is recognized or identified by services.
 */
module { name = "ns_status" }
command { service = "NickServ"; name = "STATUS"; command = "nickserv/status"; }
 
/*
 * ns_suspend
 *
 * Provides the commands nickserv/suspend and nickserv/unsuspend.
 *
 * Used to suspend and unsuspend nicknames. Suspended nicknames can not be used but their settings are preserved.
 */
module
{
	name = "ns_suspend"
 
	/*
	 * The length of time before a suspended nick becomes unsuspended.
	 *
	 * This directive is optional. If not set, the default is never.
	 */
	#suspendexpire = 90d
 
	/*
	 * Settings to show to non-opers in NickServ's INFO output.
	 * Comment to completely disable showing any information about
	 * suspended nicknames to non-opers.
	 */
	show = "suspended, by, reason, on, expires"
}
command { service = "NickServ"; name = "SUSPEND"; command = "nickserv/suspend"; permission = "nickserv/suspend"; group = "nickserv/admin"; }
command { service = "NickServ"; name = "UNSUSPEND"; command = "nickserv/unsuspend"; permission = "nickserv/suspend"; group = "nickserv/admin"; }
 
/*
 * ns_update
 *
 * Provides the command nickserv/update.
 *
 * Used to update your status on all channels, turn on your vHost, etc.
 */
module { name = "ns_update" }
command { service = "NickServ"; name = "UPDATE"; command = "nickserv/update"; }
 
 
/*
 * Extra NickServ related modules.
 */
 
/*
 * ns_maxemail
 *
 * Limits how many times the same email address may be used in Anope
 * to register accounts.
 */
#module
{
	name = "ns_maxemail"
 
	/*
	 * The limit to how many registered nicks can use the same e-mail address. If set to 0 or left
	 * commented, there will be no limit enforced when registering new accounts or using
	 * /msg NickServ SET EMAIL.
	 */
	maxemails = 1
}


ChanServ

/*
 * Example configuration file for ChanServ.
 */
 
/*
 * First, create the service.
 */
service
{
	/*
	 * The name of the ChanServ client.
	 * If you change this value, you probably want to change the client directive in the configuration for the chanserv module too.
	 */
	nick = "ChanServ"
 
	/*
	 * The username of the ChanServ client.
	 */
	user = "services"
 
	/*
	 * The hostname of the ChanServ client.
	 */
	host = "services.host"
 
	/*
	 * The realname of the ChanServ client.
	 */
	gecos = "Channel Registration Service"
 
	/*
	 * The modes this client should use.
	 * Do not modify this unless you know what you are doing.
	 *
	 * These modes are very IRCd specific. If left commented, sane defaults
	 * are used based on what protocol module you have loaded.
	 *
	 * Note that setting this option incorrectly could potentially BREAK some, if
	 * not all, usefulness of the client. We will not support you if this client is
	 * unable to do certain things if this option is enabled.
	 */
	#modes = "+o"
 
	/*
	 * An optional comma separated list of channels this service should join. Outside
	 * of log channels this is not very useful, as the service will just idle in the
	 * specified channels, and will not accept any types of commands.
	 *
	 * Prefixes may be given to the channels in the form of mode characters or prefix symbols.
	 */
	#channels = "@#services,#mychan"
}
 
/*
 * Core ChanServ module.
 *
 * Provides essential functionality for ChanServ.
 */
module
{
	name = "chanserv"
 
	/*
	 * The name of the client that should be ChanServ.
	 */
	client = "ChanServ"
 
	/*
	 * The default options for newly registered channels. Note that changing these options
	 * will have no effect on channels which are already registered. The list must be separated
	 * by spaces.
	 *
	 * The options are:
	 * -      keeptopic: Retain topic when the channel is not in use
	 * -          peace: Disallow users from kicking or removing modes from others who are of the same
	 *                     access level or superior
	 * -     cs_private: Hide the channel from ChanServ's LIST command
	 * -     restricted: Kick/ban users who are restricted from the channel
	 * -      cs_secure: Enable channel security, requiring the user to be identified with NickServ in
	 *                     order to be considered for being on the access list of the channel
	 * -      secureops: Only allow operator status to be given if the user is on the access list
	 * -  securefounder: Only allow the real founder of the channel to drop the channel, change it's
	 *                     password, or change the founder or successor
	 * -       signkick: Use of ChanServ's KICK command will cause the user's nick to be signed to the kick.
	 * - signkick_level: Same as above, but the kick will not be signed if the user is at the same access
	 *                     level or superior to the target
	 * -      topiclock: Disallow the topic to be changed except with ChanServ's TOPIC command
	 * -        persist: Keep the channel open at all times
	 * -       noautoop: Disables autoop on the channel
	 * -  cs_keep_modes: Enables keep modes on the channel, which retains modes when the channel is
	 *                     not in use.
	 * -           none: No defaults
	 *
	 * This directive is optional, if left blank, the options will default to keeptopic, cs_secure, securefounder,
	 * and signkick. If you really want no defaults, use "none" by itself as the option.
	 */
	defaults = "keeptopic peace cs_secure securefounder signkick"
 
	/*
	 * The maximum number of channels which may be registered to a single nickname.
	 *
	 * This directive is optional, but recommended.
	 * If not set, there will be no restriction on the numbers of channels a single nickname can have registered.
	 */
	maxregistered = 20
 
	/*
	 * The length of time before a channel registration expires.
	 *
	 * This directive is optional, but recommended.
	 * If not set, the default is 14 days.
	 */
	expire = 14d
 
	/*
	 * The maximum number of entries on a channel's access list.
	 * If not set, the default is 1024. This can be set to 0 for unlimited.
	 */
	accessmax = 1024
 
	/*
	 * The length of time ChanServ stays in a channel after kicking a user from a channel they are not
	 * permitted to be in. This only occurs when the user is the only one in the channel.
	 */
	inhabit = 15s
 
	/*
	 * Allow only IRC Operators to use ChanServ.
	 *
	 * This directive is optional.
	 */
	#opersonly = yes
 
	/*
	 * Modes that will not be allowed to be locked. Oper only modes such as +O
	 * are always restricted from regular users and are not affected by this.
	 * Comment out for no restrictions.
	 */
	#nomlock = "P"
 
	/*
	 * Modes that are required to be set and only set on all registered channels.
	 * These modes can not be locked or unlocked. The registered channel mode is
	 * automatically always required, if such a mode exists.
	 */
	#require = "r"
 
	/*
	 * The maximum length of the reason field for user commands such as chanserv/kick
	 * and chanserv/ban.
	 */
	reasonmax = 200
 
	/*
	 * If set, prevents channel access entries from containing hostmasks.
	 */
	disallow_hostmask_access = false
 
	/*
	 * If set, prevents channels from being on access lists.
	 */
	disallow_channel_access = false
 
	/*
	 * If set, ChanServ will always lower the timestamp of registered channels to their registration date.
	 * This prevents several race conditions where unauthorized users can join empty registered channels and set
	 * modes etc. prior to services deopping them.
	 */
	always_lower_ts = false
}
 
/*
 * ChanServ privilege configuration.
 *
 * ChanServ privileges are used to determine who has what access in channels. By default the core has its own
 * set of privileges it uses for various commands, which are defined below. Privilege ranks are used to
 * determine how powerful privileges are relative to other privileges, which is used by Anope to determine
 * who has greater access in a channel.
 *
 * If you load cs_access, you may define a level for the privilege, which is used by chanserv/access and chanserv/levels.
 * The levels defined will be used as the default levels for newly registered channels.
 * The level "founder" is a special level which means anyone with the privilege FOUNDER on the channel
 * has that permission. Additionally, the level "disabled" means that no one can use the privilege, including founders.
 *
 * If you load cs_flags, you may define a flag associated with that privilege for use in chanserv/flags.
 *
 * If you load cs_xop, you may define a XOP command to associate the privilege with.
 *
 * The name of privileges are uesd to associate them with channel modes. If you are using an IRCd that allows you to define additional
 * channel status modes, such as InspIRCd, you can associate privileges (and thus access levels, flags, xop) with the mode by naming
 * the privileges appropriately. For example, if you had a channel mode called admin, you could create AUTOADMIN, ADMIN, and ADMINME
 * privileges which would automatically be associated with that channel mode.
 *
 * Defining new privileges here is not useful unless you have a module (eg, a third party one) made to check for
 * the specific level you are defining.
 *
 * Sane defaults are provided below that do not need to be edited unless you wish to change the default behavior.
 */
 
/*
 * ACCESS_CHANGE privilege.
 *
 * Used by chanserv/access, chanserv/flags and chanserv/xop.
 *
 * Users with this permission can modify the permissions of others.
 */
privilege
{
	name = "ACCESS_CHANGE"
	rank = 0
	level = 10
	flag = "f"
	xop = "SOP"
}
 
/*
 * ACCESS_LIST privilege.
 *
 * Used by chanserv/access, chanserv/flags, and chanserv/xop.
 *
 * Users with this permission can view the access list of channels.
 */
privilege
{
	name = "ACCESS_LIST"
	rank = 10
	level = 3
	flag = "f"
	xop = "VOP"
}
 
/*
 * AKICK privilege.
 *
 * Used by chanserv/akick and chanserv/enforce.
 *
 * Users with this permission can modify the AKICK list.
 */
privilege
{
	name = "AKICK"
	rank = 250
	level = 10
	flag = "K"
	xop = "SOP"
}
 
/*
 * ASSIGN privilege.
 *
 * Used by botserv/assign.
 *
 * Users with this permission can assign and unassign BotServ bots to and from the channel.
 */
privilege
{
	name = "ASSIGN"
	rank = 270
	level = "founder"
	flag = "s"
	xop = "QOP"
}
 
/*
 * AUTOHALFOP privilege.
 *
 * Used by the core.
 *
 * Users with this permission get halfop on join.
 */
privilege
{
	name = "AUTOHALFOP"
	rank = 100
	level = 4
	flag = "H"
	xop = "HOP"
}
 
/*
 * AUTOOP privilege.
 *
 * Used by the core.
 *
 * Users with this permission get op on join.
 */
privilege
{
	name = "AUTOOP"
	rank = 210
	level = 5
	flag = "O"
	xop = "AOP"
}
 
/*
 * AUTOOWNER privilege.
 *
 * Used by the core.
 *
 * Users with this permission get owner on join.
 */
privilege
{
	name = "AUTOOWNER"
	rank = 330
	level = 9999
	flag = "Q"
	xop = "QOP"
}
 
/*
 * AUTOPROTECT privilege.
 *
 * Used by the core.
 *
 * Users with this permission get admin on join.
 */
privilege
{
	name = "AUTOPROTECT"
	rank = 240
	level = 10
	flag = "A"
	xop = "SOP"
}
 
/*
 * AUTOVOICE privilege.
 *
 * Used by the core.
 *
 * Users with this permission get voice on join.
 */
privilege
{
	name = "AUTOVOICE"
	rank = 50
	level = 3
	flag = "V"
	xop = "VOP"
}
 
/*
 * BADWORDS privilege.
 *
 * Used by botserv/badwords.
 *
 * Users with this permission can modify BotServ's BADWORDS list.
 */
privilege
{
	name = "BADWORDS"
	rank = 260
	level = 10
	flag = "K"
	xop = "SOP"
}
 
/*
 * BAN privilege.
 *
 * Used by chanserv/ban.
 *
 * Users with this permission can use the BAN command.
 */
privilege
{
	name = "BAN"
	rank = 150
	level = 4
	flag = "b"
	xop = "HOP"
}
 
/*
 * FANTASIA privilege.
 *
 * Used by botserv/main and chanserv/xop.
 *
 * Users with this permission can use fantasy commands in the channel.
 */
privilege
{
	name = "FANTASIA"
	rank = 30
	level = 3
	flag = "c"
	xop = "VOP"
}
 
/*
 * FOUNDER privilege.
 *
 * Used by chanserv/access, chanserv/akick,
 * chanserv/drop, chanserv/set/founder,
 * chanserv/set/securefounder, chanserv/set/successor and chanserv/xop.
 *
 * Users with this permission are treated as founders and can use
 * commands restricted to founders.
 */
privilege
{
	name = "FOUNDER"
	rank = 360
	level = 10000
	flag = "F"
	xop = "QOP"
}
 
/*
 * GETKEY privilege.
 *
 * Used by chanserv/getkey and nickserv/ajoin.
 *
 * Users with this permission can get they channel key with GETKEY and
 * can use nickserv/ajoin to join channels with keys.
 */
privilege
{
	name = "GETKEY"
	rank = 180
	level = 5
	flag = "G"
	xop = "AOP"
}
 
/*
 * HALFOP privilege.
 *
 * Used by chanserv/mode, chanserv/halfop and chanserv/dehalfop.
 *
 * Users with this permission can use ChanServ to halfop and dehalfop
 * others in the channel.
 */
privilege
{
	name = "HALFOP"
	rank = 120
	level = 5
	flag = "h"
	xop = "AOP"
}
 
/*
 * HALFOPME privilege.
 *
 * Used by chanserv/mode, chanserv/halfop and chanserv/dehalfop.
 *
 * Users with this permission can use ChanServ to halfop and dehalfop
 * themselves in the channel.
 */
privilege
{
	name = "HALFOPME"
	rank = 110
	level = 4
	flag = "h"
	xop = "HOP"
}
 
/*
 * INFO privilege.
 *
 * Used by botserv/info and chanserv/info.
 *
 * Users with this permission are allowed to get the full INFO output
 * from BotServ and ChanServ.
 */
privilege
{
	name = "INFO"
	rank = 80
	level = 9999
	flag = "I"
	xop = "QOP"
}
 
/*
 * INVITE privilege.
 *
 * Used by chanserv/invite and nickserv/ajoin.
 *
 * Users with this permission can invite users through ChanServ and
 * join invite only channels with nickserv/ajoin.
 */
privilege
{
	name = "INVITE"
	rank = 190
	level = 5
	flag = "i"
	xop = "AOP"
}
 
/*
 * KICK privilege.
 *
 * Used by chanserv/kick.
 *
 * Users with this permission can use the KICK command.
 */
privilege
{
	name = "KICK"
	rank = 130
	level = 4
	flag = "k"
	xop = "HOP"
}
 
/*
 * MEMO privilege.
 *
 * Used by memoserv/del, memoserv/ignore, memoserv/info, memoserv/list,
 * memoserv/main, memoserv/read and memoserv/set.
 *
 * Users with this permission can manage channel memos.
 */
privilege
{
	name = "MEMO"
	rank = 280
	level = 10
	flag = "m"
	xop = "SOP"
}
 
/*
 * MODE privilege.
 *
 * Used by chanserv/mode.
 *
 * Users with this permission can set modes through ChanServ and change
 * the mode lock.
 */
privilege
{
	name = "MODE"
	rank = 170
	level = 9999
	flag = "s"
	xop = "QOP"
}
 
/*
 * NOKICK privilege.
 *
 * Used by botserv/kick.
 *
 * Users with this permission are spared from automated BotServ kicks.
 */
privilege
{
	name = "NOKICK"
	rank = 20
	level = 1
	flag = "N"
	xop = "VOP"
}
 
/*
 * OP privilege.
 *
 * Used by chanserv/mode, chanserv/modes.
 *
 * Users with this permission can use ChanServ to op and deop
 * others in the channel.
 */
privilege
{
	name = "OP"
	rank = 230
	level = 5
	flag = "o"
	xop = "SOP"
}
 
/*
 * OPME privilege.
 *
 * Used by chanserv/mode, chanserv/modes.
 *
 * Users with this permission can use ChanServ to op and deop
 * themselves in the channel.
 */
privilege
{
	name = "OPME"
	rank = 220
	level = 5
	flag = "o"
	xop = "AOP"
}
 
/*
 * OWNER privilege.
 *
 * Used by chanserv/mode and chanserv/modes.
 *
 * Users with this permission can use ChanServ to owner and deowner
 * others in the channel.
 */
privilege
{
	name = "OWNER"
	rank = 350
	level = "founder"
	flag = "q"
	xop = "QOP"
}
 
/*
 * OWNERME privilege.
 *
 * Used by chanserv/mode and chanserv/modes.
 *
 * Users with this permission can use ChanServ to owner and deowner
 * themselves in the channel.
 */
privilege
{
	name = "OWNERME"
	rank = 340
	level = 9999
	flag = "q"
	xop = "QOP"
}
 
/*
 * PROTECT privilege.
 *
 * Used by chanserv/mode and chanserv/modes.
 *
 * Users with this permission can use ChanServ to protect and deprotect
 * others in the channel.
 */
privilege
{
	name = "PROTECT"
	rank = 310
	level = 9999
	flag = "a"
	xop = "QOP"
}
 
/*
 * PROTECTME privilege.
 *
 * Used by chanserv/mode and chanserv/modes.
 *
 * Users with this permission can use ChanServ to protect and deprotect
 * themselves in the channel.
 */
privilege
{
	name = "PROTECTME"
	rank = 300
	level = 10
	flag = "a"
	xop = "AOP"
}
 
/*
 * SAY privilege.
 *
 * Used by botserv/control.
 *
 * Users with this permission can use the BotServ bot in the channel to
 * say or do a /me with the provided message.
 */
privilege
{
	name = "SAY"
	rank = 90
	level = 5
	flag = "B"
	xop = "AOP"
}
 
/*
 * SET privilege.
 *
 * Used by botserv/kick, botserv/set, chanserv/clone, chanserv/log,
 * chanserv/saset/noexpire and chanserv/set.
 *
 * Users with this permission can set what BotServ will kick for, change
 * BotServ and ChanServ settings, clone ChanServ channel setings, and
 * set ChanServ logging options.
 */
privilege
{
	name = "SET"
	rank = 320
	level = 9999
	flag = "s"
	xop = "QOP"
}
 
/*
 * SIGNKICK privilege.
 *
 * Used by chanserv/ban and chanserv/kick.
 *
 * Users with this permission won't get their nick shown in the kick
 * through ChanServ when the setting SIGNKICK is set to LEVEL.
 */
privilege
{
	name = "SIGNKICK"
	rank = 140
	level = 9999
	flag = "K"
	xop = "QOP"
}
 
/*
 * TOPIC privilege.
 *
 * Used by chanserv/topic.
 *
 * Users with this permission can change the channel topic through ChanServ.
 */
privilege
{
	name = "TOPIC"
	rank = 160
	level = 5
	flag = "t"
	xop = "AOP"
}
 
/*
 * UNBAN privilege.
 *
 * Used by chanserv/unban.
 *
 * Users with this permission can unban themselves and others through ChanServ.
 */
privilege
{
	name = "UNBAN"
	rank = 200
	level = 4
	flag = "u"
	xop = "HOP"
}
 
/*
 * VOICE privilege.
 *
 * Used by chanserv/mode and chanserv/modes.
 *
 * Users with this permission can use ChanServ to voice and devoice
 * others in the channel.
 */
privilege
{
	name = "VOICE"
	rank = 70
	level = 4
	flag = "v"
	xop = "HOP"
}
 
/*
 * VOICEME privilege.
 *
 * Used by chanserv/mode and chanserv/modes.
 *
 * Users with this permission can use ChanServ to voice and devoice
 * themselves in the channel.
 */
privilege
{
	name = "VOICEME"
	rank = 60
	level = 3
	flag = "v"
	xop = "VOP"
}
 
/*
 * Core ChanServ commands.
 *
 * In Anope modules can provide (multiple) commands, each of which has a unique command name. Once these modules
 * are loaded you can then configure the commands to be added to any client you like with any name you like.
 *
 * Additionally, you may provide a permission name that must be in the opertype of users executing the command.
 *
 * Sane defaults are provided below that do not need to be edited unless you wish to change the default behavior.
 */
 
/* Command group configuration for ChanServ.
 *
 * Commands may optionally be placed into groups to make ChanServ's HELP output easier to understand.
 * Remove the following groups to use the old behavior of simply listing all ChanServ commands from HELP.
 */
command_group
{
	name = "chanserv/access"
	description = _("Used to manage the list of privileged users")
}
 
command_group
{
	name = "chanserv/status"
	description = _("Used to modify the channel status of you or other users")
}
 
command_group
{
	name = "chanserv/management"
	description = _("Used to manage channels")
}
 
command_group
{
	name = "chanserv/admin"
	description = _("Services Operator commands")
}
 
/* Give it a help command. */
command { service = "ChanServ"; name = "HELP"; command = "generic/help"; }
 
/*
 * cs_access
 *
 * Provides commands chanserv/access and chanserv/levels.
 * Provides the access system "levels".
 *
 * Used for giving users access in channels using a levels system. Allows allows redefining which privileges
 * are representated by given level on a per channel basis.
 *
 * The "LIST" subcommand of chanserv/access will show every access entry on the channel, including access
 * entries not added by cs_access. The "level" of these entries will be the representation of the access
 * entry by the other access system, which could be an XOP command name, or a set of flags.
 */
module { name = "cs_access" }
command { service = "ChanServ"; name = "ACCESS"; command = "chanserv/access"; group = "chanserv/access"; }
command { service = "ChanServ"; name = "LEVELS"; command = "chanserv/levels"; group = "chanserv/access"; }
 
/*
 * cs_akick
 *
 * Provides the command chanserv/akick.
 *
 * Used for preventing users from joining channels.
 */
module
{
	name = "cs_akick"
 
	/*
	 * The maximum number of entries on a channel's autokick list.
	 */
	autokickmax = 32
 
	/*
	 * The default reason for an autokick if none is given.
	 */
	autokickreason = "User has been banned from the channel"
}
command { service = "ChanServ"; name = "AKICK"; command = "chanserv/akick"; group = "chanserv/management"; }
 
/*
 * cs_ban
 *
 * Provides the command chanserv/ban.
 *
 * The configuration option 'kick' may be set in a command block for this command to control
 * whether or not users will be kicked from the channel once banned. The default is 'yes'.
 *
 * The configuration option 'mode' may be set to control which mode is set, such as BAN or QUIET.
 * The default is BAN.
 *
 * Used for banning users from channels.
 */
module { name = "cs_ban" }
command { service = "ChanServ"; name = "BAN"; command = "chanserv/ban"; }
 
/*
 * cs_clone
 *
 * Provides the command chanserv/clone.
 *
 * Used for copying channel settings from one channel to another.
 */
module { name = "cs_clone" }
command { service = "ChanServ"; name = "CLONE"; command = "chanserv/clone"; group = "chanserv/management"; }
 
/*
 * cs_drop
 *
 * Provides the command chanserv/drop.
 *
 * Used for unregistering channels.
 */
module { name = "cs_drop" }
command { service = "ChanServ"; name = "DROP"; command = "chanserv/drop"; }
 
/*
 * cs_enforce
 *
 * Provides the command chanserv/enforce.
 *
 * Used to enforce various channel settings such as secureops and restricted.
 */
module { name = "cs_enforce" }
command { service = "ChanServ"; name = "ENFORCE"; command = "chanserv/enforce"; group = "chanserv/management"; }
 
/*
 * cs_entrymsg
 *
 * Provides the command chanserv/entrymsg.
 *
 * Used to configure entry messages sent to users when they join a channel.
 */
module
{
	name = "cs_entrymsg"
 
	/* The maximum number of entrymsgs allowed per channel. If not set, defaults to 5. */
	maxentries = 5
}
command { service = "ChanServ"; name = "ENTRYMSG"; command = "chanserv/entrymsg"; group = "chanserv/management"; }
 
/*
 * cs_flags
 *
 * Provides the command chanserv/flags.
 * Provides the access system "flags".
 *
 * Used for giving users access in channels.
 *
 * The "LIST" subcommand of chanserv/flags will show every access entry on the channel, including access
 * entries not added by cs_flags. The "Flags" of these entries will be the flags representation of the
 * privilege set granted by the access entry.
 */
module { name = "cs_flags" }
command { service = "ChanServ"; name = "FLAGS"; command = "chanserv/flags"; group = "chanserv/access"; }
 
/*
 * cs_getkey
 *
 * Provides the command chanserv/getkey.
 *
 * Used for getting the key for channels.
 */
module { name = "cs_getkey" }
command { service = "ChanServ"; name = "GETKEY"; command = "chanserv/getkey"; }
 
/*
 * cs_info
 *
 * Provides the command chanserv/info.
 *
 * Used for getting information about channels.
 */
module { name = "cs_info" }
command { service = "ChanServ"; name = "INFO"; command = "chanserv/info"; }
 
/*
 * cs_invite
 *
 * Provides the command chanserv/invite.
 *
 * Used for inviting yourself in to channels.
 */
module { name = "cs_invite" }
command { service = "ChanServ"; name = "INVITE"; command = "chanserv/invite"; }
 
/*
 * cs_kick
 *
 * Provides the command chanserv/kick.
 *
 * Used for kicking users from channels.
 */
module { name = "cs_kick" }
command { service = "ChanServ"; name = "KICK"; command = "chanserv/kick"; }
 
/*
 * cs_list
 *
 * Provides the commands:
 *   chanserv/list - Used for retrieving and searching the registered channel list.
 *   chanserv/set/private - Used for setting whether channels should show up in chanserv/list.
 */
module
{
	name = "cs_list"
 
	/*
	 * The maximum number of channels to be returned for a ChanServ LIST command.
	 */
	listmax = 50
}
command { service = "ChanServ"; name = "LIST"; command = "chanserv/list"; }
 
command { service = "ChanServ"; name = "SET PRIVATE"; command = "chanserv/set/private"; }
 
 
/*
 * cs_log
 *
 * Provides the command chanserv/log.
 *
 * Use for configuring what actions on channels are logged and where.
 */
module
{
	name = "cs_log"
 
	/* Default log settings for newly registered channels */
 
	#default
	{
		command = "chanserv/modes"
		method = "MESSAGE @"
	}
 
	#default
	{
		service = "ChanServ"
		command = "ACCESS"
		method = "MESSAGE @"
	}
 
	#default
	{
		command = "chanserv/xop"
		method = "MESSAGE @"
	}
 
	#default
	{
		service = "ChanServ"
		command = "FLAGS"
		method = "MESSAGE @"
	}
}
command { service = "ChanServ"; name = "LOG"; command = "chanserv/log"; group = "chanserv/management"; }
 
/*
 * cs_mode
 *
 * Provides the command chanserv/mode and chanserv/modes.
 *
 * Used for changing mode locks and changing modes. Multiple commands may be mapped to chanserv/modes, the
 * configuration directive 'set' and 'unset' are used to tell chanserv/modes which modes should be set or
 * unset when the command is executed.
 */
module
{
	name = "cs_mode"
 
	/*
	 * Default modes for mode lock, these are set on newly registered channels.
	 *
	 * If not set, the default is +nt.
	 */
	mlock = "+nt"
}
command { service = "ChanServ"; name = "MODE"; command = "chanserv/mode"; group = "chanserv/management"; }
 
command { service = "ChanServ"; name = "OWNER"; command = "chanserv/modes"; group = "chanserv/status"; set = "OWNER" }
command { service = "ChanServ"; name = "DEOWNER"; command = "chanserv/modes"; group = "chanserv/status"; unset = "OWNER" }
 
command { service = "ChanServ"; name = "PROTECT"; command = "chanserv/modes"; group = "chanserv/status"; set = "PROTECT" }
command { service = "ChanServ"; name = "DEPROTECT"; command = "chanserv/modes"; group = "chanserv/status"; unset = "PROTECT" }
 
command { service = "ChanServ"; name = "OP"; command = "chanserv/modes"; group = "chanserv/status"; set = "OP" }
command { service = "ChanServ"; name = "DEOP"; command = "chanserv/modes"; group = "chanserv/status"; unset = "OP" }
 
command { service = "ChanServ"; name = "HALFOP"; command = "chanserv/modes"; group = "chanserv/status"; set = "HALFOP" }
command { service = "ChanServ"; name = "DEHALFOP"; command = "chanserv/modes"; group = "chanserv/status"; unset = "HALFOP" }
 
command { service = "ChanServ"; name = "VOICE"; command = "chanserv/modes"; group = "chanserv/status"; set = "VOICE" }
command { service = "ChanServ"; name = "DEVOICE"; command = "chanserv/modes"; group = "chanserv/status"; unset = "VOICE" }
 
 
/*
 * cs_register
 *
 * Provides the commands chanserv/register.
 *
 * Used for registering channels.
 */
module { name = "cs_register" }
command { service = "ChanServ"; name = "REGISTER"; command = "chanserv/register"; }
 
/*
 * cs_seen
 *
 * Provides the commands chanserv/seen and operserv/seen.
 *
 * Records the last time a user was seen and what they were doing and allows users to request this data.
 * Also allows administrators to view stats about seen data and purge the database.
 */
module
{
	name = "cs_seen"
 
	/* If set, uses the older 1.8 style seen, which is less resource intensive */
	simple = false
 
	/* Sets the time to keep seen entries in the seen database. */
	purgetime = "30d"
 
	/* Sets the delay between checks for expired seen entries. */
	expiretimeout = "1d"
}
command { service = "OperServ"; name = "SEEN"; command = "operserv/seen"; permission = "operserv/seen"; }
 
/*
 * cs_set
 *
 * Provides the commands:
 *   chanserv/set and chanserv/saset - Dummy help wrappers for the SET commands.
 *   chanserv/set/autoop - Used for configuring whether or not ChanServ automatically gives channel status to users.
 *   chanserv/set/bantype - Used for controlling what format of bans are placed on channels.
 *   chanserv/set/description - Used for changing channels descriptions.
 *   chanserv/set/founder - Used for changing a channel's founder.
 *   chanserv/set/keepmodes - Used for enabling or disabling keepmodes, which retains channel modes.
 *   chanserv/set/peace - Used for configuring if users are able to kick other users with higher access than them.
 *   chanserv/set/persist - Used for setting whether ChanServ should stay in channels after the last user leaves.
 *   chanserv/set/restricted - Used for setting whether users not on a channel's access list can join.
 *   chanserv/set/secure - Used for setting whether users who are recognized for accounts should have their access in channels.
 *   chanserv/set/securefounder - Used for setting whether users with founder level access in channels have true founder or not.
 *   chanserv/set/secureops - Used for restricting who can have channel op privilege in a channel to those whom have access in the channel.
 *   chanserv/set/signkick - Used for setting signkick, which appends the kicker's name to kicks sent through ChanServ.
 *   chanserv/set/successor - Used for setting channel successors, which become channel founders if the founders' account expires.
 *   chanserv/saset/noexpire - Used for setting noexpire, which prevents channels from expiring.
 *
 * This is a dummy command to provide a help wrapper for the various SET commands.
 */
module
{
	name = "cs_set"
 
	/*
	 * The default ban type for newly registered channels.
	 *
	 * defbantype can be:
	 *
	 * 0: ban in the form of *!user@host
	 * 1: ban in the form of *!*user@host
	 * 2: ban in the form of *!*@host
	 * 3: ban in the form of *!*user@*.domain
	 */
	defbantype = 2
 
	/*
	 * If set, persisent channels have their creation times lowered to their
	 * original registration dates.
	 */
	persist_lower_ts = true
}
command { service = "ChanServ"; name = "SET"; command = "chanserv/set"; group = "chanserv/management"; }
command { service = "ChanServ"; name = "SET AUTOOP"; command = "chanserv/set/autoop"; }
command { service = "ChanServ"; name = "SET BANTYPE"; command = "chanserv/set/bantype"; }
command { service = "ChanServ"; name = "SET DESCRIPTION"; command = "chanserv/set/description"; }
command { service = "ChanServ"; name = "SET DESC"; command = "chanserv/set/description"; }
command { service = "ChanServ"; name = "SET FOUNDER"; command = "chanserv/set/founder"; }
command { service = "ChanServ"; name = "SET KEEPMODES"; command = "chanserv/set/keepmodes"; }
command { service = "ChanServ"; name = "SET PEACE"; command = "chanserv/set/peace"; }
command { service = "ChanServ"; name = "SET PERSIST"; command = "chanserv/set/persist"; }
command { service = "ChanServ"; name = "SET RESTRICTED"; command = "chanserv/set/restricted"; }
command { service = "ChanServ"; name = "SET SECURE"; command = "chanserv/set/secure"; }
command { service = "ChanServ"; name = "SET SECUREFOUNDER"; command = "chanserv/set/securefounder"; }
command { service = "ChanServ"; name = "SET SECUREOPS"; command = "chanserv/set/secureops"; }
command { service = "ChanServ"; name = "SET SIGNKICK"; command = "chanserv/set/signkick"; }
command { service = "ChanServ"; name = "SET SUCCESSOR"; command = "chanserv/set/successor"; }
command { service = "ChanServ"; name = "SET NOEXPIRE"; command = "chanserv/saset/noexpire"; permission = "chanserv/saset/noexpire"; }
 
/*
 * cs_set_misc
 *
 * Provides the command chanserv/set/misc.
 *
 * Allows you to create arbitrary commands to set data, and have that data show up in chanserv/info.
 * A field named misc_description may be given for use with help output.
 */
module { name = "cs_set_misc" }
command { service = "ChanServ"; name = "SET URL"; command = "chanserv/set/misc"; misc_description = _("Associate a URL with the channel"); }
command { service = "ChanServ"; name = "SET EMAIL"; command = "chanserv/set/misc"; misc_description = _("Associate an E-mail address with the channel"); }
 
/*
 * cs_status
 *
 * Provides the command chanserv/status.
 *
 * Used for determining a user's access on a channel and whether
 * or not they match any autokick entries.
 */
module { name = "cs_status" }
command { service = "ChanServ"; name = "STATUS"; command = "chanserv/status"; }
 
/*
 * cs_suspend
 *
 * Provides the commands chanserv/suspend and chanserv/unsuspend.
 *
 * Used for suspending and unsuspending channels. Suspended channels can not be used but their settings are stored.
 */
module
{
	name = "cs_suspend"
 
	/*
	 * The length of time before a suspended channel expires.
	 *
	 * This directive is optional.
	 * If not set, the default is never.
	 */
	expire = 90d
 
	/*
	 * Settings to show to non-opers in ChanServ's INFO output.
	 * Comment to completely disable showing any information about
	 * suspended channels to non-opers.
	 */
	show = "suspended, by, reason, on, expires"
}
command { service = "ChanServ"; name = "SUSPEND"; command = "chanserv/suspend"; permission = "chanserv/suspend"; group = "chanserv/admin"; }
command { service = "ChanServ"; name = "UNSUSPEND"; command = "chanserv/unsuspend"; permission = "chanserv/suspend"; group = "chanserv/admin"; }
 
/*
 * cs_sync
 *
 * Provides the command chanserv/sync.
 *
 * Used to sync users channel status modes with what access they have.
 */
module { name = "cs_sync" }
command { service = "ChanServ"; name = "SYNC"; command = "chanserv/sync"; group = "chanserv/management"; }
 
/*
 * cs_topic
 *
 * Provides the commands:
 *   chanserv/topic - Used for changing the channel topic. Useful in conjunction with chanserv/set/topiclock.
 *   chanserv/set/keeptopic - Used for configuring if ChanServ is to restore the channel topic when a channel is created.
 *
 */
module { name = "cs_topic" }
command { service = "ChanServ"; name = "TOPIC"; command = "chanserv/topic"; group = "chanserv/management"; }
command { service = "ChanServ"; name = "SET KEEPTOPIC"; command = "chanserv/set/keeptopic"; }
 
/*
 * cs_unban
 *
 * Provides the command chanserv/unban.
 *
 * Used for unbanning users from channels.
 */
module { name = "cs_unban" }
command { service = "ChanServ"; name = "UNBAN"; command = "chanserv/unban"; }
 
/*
 * cs_updown
 *
 * Provides the commands chanserv/up and chanserv/down.
 *
 * Used for setting or removing your status modes on a channel.
 */
module { name = "cs_updown" }
command { service = "ChanServ"; name = "DOWN"; command = "chanserv/down"; group = "chanserv/status"; }
command { service = "ChanServ"; name = "UP"; command = "chanserv/up"; group = "chanserv/status"; }
 
/*
 * cs_xop
 *
 * Provides the command chanserv/xop.
 * Provides the access system "XOP".
 *
 * Used for giving users access in channels. Many commands may be linked to chanserv/xop, but the
 * privileges given by each is determined by the privilege:xop settings above. These commands should
 * be ordered from highest to lowest, as each command inherits the privileges of the commands below
 * it.
 *
 * The "LIST" subcommand of chanserv/xop will show only XOP access entries of the given XOP type. You
 * can not view the entire access list at once, and instead should use another access system to do that.
 */
module { name = "cs_xop" }
command { service = "ChanServ"; name = "QOP"; command = "chanserv/xop"; group = "chanserv/access"; }
command { service = "ChanServ"; name = "SOP"; command = "chanserv/xop"; group = "chanserv/access"; }
command { service = "ChanServ"; name = "AOP"; command = "chanserv/xop"; group = "chanserv/access"; }
command { service = "ChanServ"; name = "HOP"; command = "chanserv/xop"; group = "chanserv/access"; }
command { service = "ChanServ"; name = "VOP"; command = "chanserv/xop"; group = "chanserv/access"; }
 
 
/*
 * Extra ChanServ related modules.
 */
 
/*
 * cs_statusupdate
 *
 * This module automatically updates users status on channels when the
 * channel's access list is modified.
 */
module { name = "cs_statusupdate" }

MemoServ

/*
 * Example configuration file for MemoServ.
 */
 
/*
 * First, create the service.
 */
service
{
	/*
	 * The name of the MemoServ client.
	 * If you change this value, you probably want to change the client directive in the configuration for the memoserv module too.
	 */
	nick = "MemoServ"
 
	/*
	 * The username of the MemoServ client.
	 */
	user = "services"
 
	/*
	 * The hostname of the MemoServ client.
	 */
	host = "services.host"
 
	/*
	 * The realname of the MemoServ client.
	 */
	gecos = "Memo Service"
 
	/*
	 * The modes this client should use.
	 * Do not modify this unless you know what you are doing.
	 *
	 * These modes are very IRCd specific. If left commented, sane defaults
	 * are used based on what protocol module you have loaded.
	 *
	 * Note that setting this option incorrectly could potentially BREAK some, if
	 * not all, usefulness of the client. We will not support you if this client is
	 * unable to do certain things if this option is enabled.
	 */
	#modes = "+o"
 
	/*
	 * An optional comma separated list of channels this service should join. Outside
	 * of log channels this is not very useful, as the service will just idle in the
	 * specified channels, and will not accept any types of commands.
	 *
	 * Prefixes may be given to the channels in the form of mode characters or prefix symbols.
	 */
	#channels = "@#services,#mychan"
}
 
/*
 * Core MemoServ module.
 *
 * Provides essential functionality for MemoServ.
 */
module
{
	name = "memoserv"
	/*
	 * The name of the client that should be MemoServ. Clients are configured
	 * with the service blocks.
	 */
	client = "MemoServ"
 
	/*
	 * The maximum number of memos a user is allowed to keep by default. Normal users may set the
	 * limit anywhere between 0 and this value. Services Admins can change it to any value or
	 * disable it.
	 *
	 * This directive is optional, but recommended. If not set, the limit is disabled
	 * by default, and normal users can set any limit they want.
	 */
	maxmemos = 20
 
	/*
	 * The delay between consecutive uses of the MemoServ SEND command. This can help prevent spam
	 * as well as denial-of-service attacks from sending large numbers of memos and filling up disk
	 * space (and memory). The default 3-second wait means a maximum average of 150 bytes of memo
	 * per second per user under the current IRC protocol.
	 *
	 * This directive is optional, but recommended.
	 */
	senddelay = 3s
}
 
/*
 * Core MemoServ commands.
 *
 * In Anope modules can provide (multiple) commands, each of which has a unique command name. Once these modules
 * are loaded you can then configure the commands to be added to any client you like with any name you like.
 *
 * Additionally, you may provide a permission name that must be in the opertype of users executing the command.
 *
 * Sane defaults are provided below that do not need to be edited unless you wish to change the default behavior.
 */
 
/* Give it a help command. */
command { service = "MemoServ"; name = "HELP"; command = "generic/help"; }
 
/*
 * ms_cancel
 *
 * Provides the command memoserv/cancel.
 *
 * Used to cancel memos already sent but not yet read.
 */
module { name = "ms_cancel" }
command { service = "MemoServ"; name = "CANCEL"; command = "memoserv/cancel"; }
 
/*
 * ms_check
 *
 * Provides the command memoserv/check.
 *
 * Used to check if a sent memo has been read.
 */
module { name = "ms_check" }
command { service = "MemoServ"; name = "CHECK"; command = "memoserv/check"; }
 
/*
 * ms_del
 *
 * Provides the command memoserv/del.
 *
 * Used to delete your memos.
 */
module { name = "ms_del" }
command { service = "MemoServ"; name = "DEL"; command = "memoserv/del"; }
 
/*
 * ms_ignore
 *
 * Provides the command memoserv/ignore.
 *
 * Used to ignore memos from specific users.
 */
module { name = "ms_ignore" }
command { service = "MemoServ"; name = "IGNORE"; command = "memoserv/ignore"; }
 
/*
 * ms_info
 *
 * Provides the command memoserv/info.
 *
 * Used to show memo related information about an account or a channel.
 */
module { name = "ms_info" }
command { service = "MemoServ"; name = "INFO"; command = "memoserv/info"; }
 
/*
 * ms_list
 *
 * Provides the command memoserv/list.
 *
 * Used to list your current memos.
 */
module { name = "ms_list" }
command { service = "MemoServ"; name = "LIST"; command = "memoserv/list"; }
 
/*
 * ms_read
 *
 * Provides the command memoserv/read.
 *
 * Used to read your memos.
 */
module { name = "ms_read" }
command { service = "MemoServ"; name = "READ"; command = "memoserv/read"; }
 
/*
 * ms_rsend
 *
 * Provides the command memoserv/rsend.
 *
 * Used to send a memo requiring a receipt be sent back once it is read.
 *
 * Requires configuring memoserv:memoreceipt.
 */
#module
{
	name = "ms_rsend"
 
	/*
	 * Only allow Services Operators to use ms_rsend.
	 *
	 * This directive is optional.
	 */
	operonly = false
}
#command { service = "MemoServ"; name = "RSEND"; command = "memoserv/rsend"; }
 
/*
 * ms_send
 *
 * Provides the command memoserv/send.
 *
 * Used to send memos.
 */
module { name = "ms_send" }
command { service = "MemoServ"; name = "SEND"; command = "memoserv/send"; }
 
/*
 * ms_sendall
 *
 * Provides the command memoserv/sendall.
 *
 * Used to send a mass memo to every registered user.
 */
module { name = "ms_sendall" }
command { service = "MemoServ"; name = "SENDALL"; command = "memoserv/sendall"; permission = "memoserv/sendall"; }
 
/*
 * ms_set
 *
 * Provides the command memoserv/set.
 *
 * Used to set settings such as how you are notified of new memos, and your memo limit.
 */
module { name = "ms_set" }
command { service = "MemoServ"; name = "SET"; command = "memoserv/set"; }
 
/*
 * ms_staff
 *
 * Provides the command memoserv/staff.
 *
 * Used to send a memo to all registered staff members.
 */
module { name = "ms_staff" }
command { service = "MemoServ"; name = "STAFF"; command = "memoserv/staff"; permission = "memoserv/staff"; }

OperServ

/*
 * Example configuration file for OperServ.
 */
 
/*
 * First, create the service.
 */
service
{
	/*
	 * The name of the OperServ client.
	 * If you change this value, you probably want to change the client directive in the configuration for the operserv module too.
	 */
	nick = "OperServ"
 
	/*
	 * The username of the OperServ client.
	 */
	user = "services"
 
	/*
	 * The hostname of the OperServ client.
	 */
	host = "services.host"
 
	/*
	 * The realname of the OperServ client.
	 */
	gecos = "Operator Service"
 
	/*
	 * The modes this client should use.
	 * Do not modify this unless you know what you are doing.
	 *
	 * These modes are very IRCd specific. If left commented, sane defaults
	 * are used based on what protocol module you have loaded.
	 *
	 * Note that setting this option incorrectly could potentially BREAK some, if
	 * not all, usefulness of the client. We will not support you if this client is
	 * unable to do certain things if this option is enabled.
	 */
	#modes = "+o"
 
	/*
	 * An optional comma separated list of channels this service should join. Outside
	 * of log channels this is not very useful, as the service will just idle in the
	 * specified channels, and will not accept any types of commands.
	 *
	 * Prefixes may be given to the channels in the form of mode characters or prefix symbols.
	 */
	#channels = "@#services,#mychan"
}
 
/*
 * Core OperServ module.
 *
 * Provides essential functionality for OperServ.
 */
module
{
	name = "operserv"
 
	/*
	 * The name of the client that should be OperServ.
	 */
	client = "OperServ"
 
	/*
	 * These define the default expiration times for, respectively, AKILLs, CHANKILLs, SNLINEs,
	 * and SQLINEs.
	 */
	autokillexpiry = 30d
	chankillexpiry = 30d
	snlineexpiry = 30d
	sqlineexpiry = 30d
 
	/*
	 * If set, this option will make Services send an AKILL command immediately after it has been
	 * added with AKILL ADD. This eliminates the need for killing the user after the AKILL has
	 * been added.
	 *
	 * This directive is optional, but recommended.
	 */
	akillonadd = yes
 
	/*
	 * If set, this option will make Services send an (SVS)KILL command immediately after SNLINE ADD.
	 * This eliminates the need for killing the user after the SNLINE has been added.
	 *
	 * This directive is optional.
	 */
	killonsnline = yes
 
	/*
	 * If set, this option will make Services send an (SVS)KILL command immediately after SQLINE ADD.
	 * This eliminates the need for killing the user after the SQLINE has been added.
	 *
	 * This directive is optional.
	 */
	killonsqline = yes
 
	/*
	 * Adds the nickname of the IRC Operator issuing an AKILL to the kill reason.
	 *
	 * This directive is optional.
	 */
	addakiller = yes
 
	/*
	 * Adds akill IDs to akills. Akill IDs are given to users in their ban reason and can be used to easily view,
	 * modify, or remove an akill from the ID.
	 */
	akillids = yes
 
	/*
	 * If set, only IRC Operators will be permitted to use OperServ, regardless of command access restrictions.
	 *
	 * This directive is optional, but recommended.
	 */
	opersonly = yes
}
 
/*
 * Core OperServ commands.
 *
 * In Anope modules can provide (multiple) commands, each of which has a unique command name. Once these modules
 * are loaded you can then configure the commands to be added to any client you like with any name you like.
 *
 * Additionally, you may provide a permission name that must be in the opertype of users executing the command.
 *
 * Sane defaults are provided below that do not need to be edited unless you wish to change the default behavior.
 */
 
/* Give it a help command. */
command { service = "OperServ"; name = "HELP"; command = "generic/help"; }
 
/*
 * os_akill
 *
 * Provides the command operserv/akill.
 *
 * Used to ban users from the network.
 */
module { name = "os_akill" }
command { service = "OperServ"; name = "AKILL"; command = "operserv/akill"; permission = "operserv/akill"; }
 
/*
 * os_chankill
 *
 * Provides the command operserv/chankill.
 *
 * Used to akill users from an entire channel.
 */
module { name = "os_chankill" }
command { service = "OperServ"; name = "CHANKILL"; command = "operserv/chankill"; permission = "operserv/chankill"; }
 
/*
 * os_defcon
 *
 * Provides the command operserv/defcon.
 *
 * Allows you to set services in defcon mode, which can be used to restrict services access
 * during bot attacks.
 */
#module
{
	name = "os_defcon"
 
	/*
	 * Default DefCon level (1-5) to use when starting Services up. Level 5 constitutes normal operation
	 * while level 1 constitutes the most restrictive operation. If this setting is left out or set to
	 * 0, DefCon will be disabled and the rest of this block will be ignored.
	 */
	#defaultlevel = 5
 
	/*
	 * The following 4 directives define what operations will take place when DefCon is set to levels
	 * 1 through 4. Each level is a list that must be separated by spaces.
	 *
	 * The following operations can be defined at each level:
	 * - nonewchannels: Disables registering new channels
	 * - nonewnicks: Disables registering new nicks
	 * - nomlockchanges: Disables changing MLOCK on registered channels
	 * - forcechanmodes: Forces all channels to have the modes given in the later chanmodes directive
	 * - reducedsessions: Reduces the session limit to the value given in the later sessionlimit directive
	 * - nonewclients: KILL any new clients trying to connect
	 * - operonly: Services will ignore all non-IRCops
	 * - silentoperonly: Services will silently ignore all non-IRCops
	 * - akillnewclients: AKILL any new clients trying to connect
	 * - nonewmemos: No new memos will be sent to block MemoServ attacks
	 */
	level4 = "nonewchannels nonewnicks nomlockchanges reducedsessions"
	level3 = "nonewchannels nonewnicks nomlockchanges forcechanmodes reducedsessions"
	level2 = "nonewchannels nonewnicks nomlockchanges forcechanmodes reducedsessions silentoperonly"
	level1 = "nonewchannels nonewnicks nomlockchanges forcechanmodes reducedsessions silentoperonly akillnewclients"
 
	/*
	 * New session limit to use when a DefCon level is using "reduced" session limiting.
	 */
	#sessionlimit = 2
 
	/*
	 * Length of time to add an AKILL for when DefCon is preventing new clients from connecting to the
	 * network.
	 */
	#akillexpire = 5m
 
	/*
	 * The channel modes to set on all channels when the DefCon channel mode system is in use.
	 *
	 * Note 1: Choose these modes carefully, because when DefCon switches to a level which does NOT have
	 * the mode setting selected, Services will set the reverse on all channels, e.g. if this setting
	 * is +RN when DefCon is used, all channels will be set to +RN, when DefCon is removed, all
	 * channels will be set to -RN. You don't want to set this to +k for example, because when DefCon
	 * is removed, all channels are set -k, removing the key from previously keyed channels.
	 *
	 * Note 2: MLOCKed modes will not be lost.
	 */
	#chanmodes = "+R"
 
	/*
	 * This value can be used to automatically return the network to DefCon level 5 after the specified
	 * time period, just in case any IRC Operator forgets to remove a DefCon setting.
	 *
	 * This directive is optional.
	 */
	#timeout = 15m
 
	/*
	 * If set, Services will send a global message on DefCon level changes.
	 *
	 * This directive is optional.
	 */
	#globalondefcon = yes
 
	/*
	 * If set, Services will send the global message defined in the message directive on DefCon level
	 * changes.
	 *
	 * This directive is optional.
	 */
	#globalondefconmore = yes
 
	/*
	 * Defines the message that will be sent on DefCon level changes when globalondefconmore is set.
	 *
	 * This directive is required only when globalondefconmore is set.
	 */
	#message = "Put your message to send your users here. Don't forget to uncomment globalondefconmore"
 
	/*
	 * Defines the message that will be sent when DefCon is returned to level 5. This directive is optional,
	 * and will also override globalondefcon and globalondefconmore when set.
	 */
	#offmessage = "Services are now back to normal, sorry for any inconvenience"
 
	/*
	 * Defines the reason to use when clients are KILLed or AKILLed from the network while the proper
	 * DefCon operation is in effect.
	 */
	#akillreason = "This network is currently not accepting connections, please try again later."
}
#command { service = "OperServ"; name = "DEFCON"; command = "operserv/defcon"; }
 
/*
 * os_dns
 *
 * Provides the command operserv/dns.
 *
 * This module requires that m_dns is loaded.
 *
 * This module allows controlling a DNS zone. This is useful for
 * controlling what servers users are placed on for load balancing,
 * and to automatically remove split servers.
 *
 * To use this module you must set a nameserver record for services
 * so that DNS queries go to services.
 *
 * Alternatively, you may use a slave DNS server to hide service's IP,
 * provide query caching, and provide better fault tolerance.
 *
 * To do this using BIND, configure similar to:
 *
 * options { max-refresh-time 60; };
 * zone "irc.example.com" IN {
 *   type slave;
 *   masters { 127.0.0.1 port 5353; };
 * };
 *
 * Where 127.0.0.1:5353 is the IP and port services are listening on.
 * We recommend you externally firewall both UDP and TCP to the port
 * Anope is listening on.
 *
 * Finally set a NS record for irc.example.com. to BIND or services.
 */
#module
{
	name = "os_dns"
 
	/* TTL for records. This should be very low if your records change often. */
	ttl = 1m
 
	/* If a server drops this many users the server is automatically removed from the DNS zone.
	 * This directive is optional.
	 */
	user_drop_mark = 50
 
	/* The time used for user_drop_mark. */
	user_drop_time = 1m
 
	/* When a server is removed from the zone for dropping users, it is readded after this time.
	 * This directive is optional.
	 */
	user_drop_readd_time = 5m
 
	/* If set, when a server splits, it is automatically removed from the zone. */
	remove_split_servers = yes
 
	/* If set, when a server connects to the network, it will be automatically added to
	 * the zone if it is a known server.
	 */
	readd_connected_servers = no
}
#command { service = "OperServ"; name = "DNS"; command = "operserv/dns"; permission = "operserv/dns"; }
 
/*
 * os_config
 *
 * Provides the command operserv/config.
 *
 * Used to view and set configuration options while services are running.
 */
module { name = "os_config" }
command { service = "OperServ"; name = "CONFIG"; command = "operserv/config"; permission = "operserv/config"; }
 
/*
 * os_forbid
 *
 * Provides the command operserv/forbid.
 *
 * Used to forbid specific nicks, channels, emails, etc. from being used.
 */
module { name = "os_forbid" }
command { service = "OperServ"; name = "FORBID"; command = "operserv/forbid"; permission = "operserv/forbid"; }
 
/*
 * os_ignore
 *
 * Provides the command operserv/ignore.
 *
 * Used to make Services ignore users.
 */
module { name = "os_ignore" }
command { service = "OperServ"; name = "IGNORE"; command = "operserv/ignore"; permission = "operserv/ignore"; }
 
/*
 * os_info
 *
 * Provides the command operserv/info.
 *
 * Used to add oper only notes to users and channels.
 */
module { name = "os_info" }
command { service = "OperServ"; name = "INFO"; command = "operserv/info"; permission = "operserv/info"; }
 
/*
 * os_jupe
 *
 * Provides the command operserv/jupe.
 *
 * Used to disconnect servers from the network and prevent them from relinking.
 */
module { name = "os_jupe" }
command { service = "OperServ"; name = "JUPE"; command = "operserv/jupe"; permission = "operserv/jupe"; }
 
/*
 * os_kick
 *
 * Provides the command operserv/kick.
 *
 * Used to kick users from channels.
 */
module { name = "os_kick" }
command { service = "OperServ"; name = "KICK"; command = "operserv/kick"; permission = "operserv/kick"; }
 
/*
 * os_kill
 *
 * Provides the command operserv/kill.
 *
 * Used to forcibly disconnect users from the network.
 */
module { name = "os_kill" }
command { service = "OperServ"; name = "KILL"; command = "operserv/kill"; permission = "operserv/kill"; }
 
/*
 * os_list
 *
 * Provides the commands operserv/chanlist and operserv/userlist.
 *
 * Used to list and search the channels and users currently on the network.
 */
module { name = "os_list" }
command { service = "OperServ"; name = "CHANLIST"; command = "operserv/chanlist"; permission = "operserv/chanlist"; }
command { service = "OperServ"; name = "USERLIST"; command = "operserv/userlist"; permission = "operserv/userlist"; }
 
/*
 * os_login
 *
 * Provides the commands operserv/login and operserv/logout.
 *
 * Used to login to OperServ, only required if your oper block requires this.
 */
module { name = "os_login" }
command { service = "OperServ"; name = "LOGIN"; command = "operserv/login"; }
command { service = "OperServ"; name = "LOGOUT"; command = "operserv/logout"; }
 
/*
 * os_logsearch
 *
 * Provides the command operserv/logsearch.
 *
 * Used to search services log files.
 */
module
{
	name = "os_logsearch"
 
	/* The log file name to search. There should be a log{} block configured to log
	 * to a file of this name.
	 */
	logname = "services.log"
}
command { service = "OperServ"; name = "LOGSEARCH"; command = "operserv/logsearch"; permission = "operserv/logsearch"; }
 
/*
 * os_mode
 *
 * Provides the commands operserv/mode and operserv/umode.
 *
 * Used to change user and channel modes.
 */
module { name = "os_mode" }
command { service = "OperServ"; name = "UMODE"; command = "operserv/umode"; permission = "operserv/umode"; }
command { service = "OperServ"; name = "MODE"; command = "operserv/mode"; permission = "operserv/mode"; }
 
/*
 * os_modinfo
 *
 * Provides the commands operserv/modinfo and operserv/modlist.
 *
 * Used to show information about loaded modules.
 */
module { name = "os_modinfo" }
command { service = "OperServ"; name = "MODINFO"; command = "operserv/modinfo"; permission = "operserv/modinfo"; }
command { service = "OperServ"; name = "MODLIST"; command = "operserv/modlist"; permission = "operserv/modinfo"; }
 
/*
 * os_module
 *
 * Provides the commands operserv/modload, operserv/modreload, and operserv/modunload.
 *
 * Used to load, reload, and unload modules.
 */
module { name = "os_module" }
command { service = "OperServ"; name = "MODLOAD"; command = "operserv/modload"; permission = "operserv/modload"; }
command { service = "OperServ"; name = "MODRELOAD"; command = "operserv/modreload"; permission = "operserv/modload"; }
command { service = "OperServ"; name = "MODUNLOAD"; command = "operserv/modunload"; permission = "operserv/modload"; }
 
/*
 * os_news
 *
 * Provides the commands operserv/logonnews, operserv/opernews, and operserv/randomnews.
 *
 * Used to configure news notices shown to users when they connect, and opers when they oper.
 */
module
{
	name = "os_news"
 
	/*
	 * The service bot names to use to send news to users on connection
	 * and to opers when they oper.
	 */
	announcer = "Global"
	oper_announcer = "OperServ"
 
	/*
	 * The number of LOGON/OPER news items to display when a user logs on.
	 *
	 * This directive is optional, if not set it will default to 3.
	 */
	#newscount = 3
}
command { service = "OperServ"; name = "LOGONNEWS"; command = "operserv/logonnews"; permission = "operserv/news"; }
command { service = "OperServ"; name = "OPERNEWS"; command = "operserv/opernews"; permission = "operserv/news"; }
command { service = "OperServ"; name = "RANDOMNEWS"; command = "operserv/randomnews"; permission = "operserv/news"; }
 
/*
 * os_noop
 *
 * Provides the command operserv/noop.
 *
 * Used to NOOP a server, which prevents users from opering on that server.
 */
module { name = "os_noop" }
command { service = "OperServ"; name = "NOOP"; command = "operserv/noop"; permission = "operserv/noop"; }
 
/*
 * os_oline
 *
 * Provides the command operserv/oline.
 *
 * Used to set oper flags on users, and is specific to UnrealIRCd.
 * See /helpop ?svso on your IRCd for more information.
 */
module { name = "os_oline" }
command { service = "OperServ"; name = "OLINE"; command = "operserv/oline"; permission = "operserv/oline"; }
 
/*
 * os_oper
 *
 * Provides the command operserv/oper.
 *
 * Used to configure opers and show information about opertypes.
 */
module { name = "os_oper" }
command { service = "OperServ"; name = "OPER"; command = "operserv/oper"; permission = "operserv/oper"; }
 
/*
 * os_reload
 *
 * Provides the command operserv/reload.
 *
 * Used to reload the services.conf configuration file.
 */
module { name = "os_reload" }
command { service = "OperServ"; name = "RELOAD"; command = "operserv/reload"; permission = "operserv/reload"; }
 
/*
 * os_session
 *
 * Provides the commands operserv/exception and operserv/session.
 *
 * This module enables session limiting. Session limiting prevents users from connecting more than a certain
 * number of times from the same IP at the same time - thus preventing most types of cloning.
 * Once a host reaches it's session limit, all clients attempting to connect from that host will
 * be killed. Exceptions to the default session limit can be defined via the exception list.
 *
 * Used to manage the session limit exception list, and view currently active sessions.
 */
module
{
	name = "os_session"
 
	/*
	 * Default session limit per host. Once a host reaches its session limit, all clients attempting
	 * to connect from that host will be killed.
	 *
	 * This directive is required if os_session is loaded.
	 */
	defaultsessionlimit = 3
 
	/*
	 * The maximum session limit that may be set for a host in an exception.
	 *
	 * This directive is required if os_session is loaded.
	 */
	maxsessionlimit = 100
 
	/*
	 * Sets the default expiry time for session exceptions.
	 *
	 * This directive is required if os_session is loaded.
	 */
	exceptionexpiry = 1d
 
	/*
	 * The message that will be NOTICE'd to a user just before they are removed from the network because
	 * their host's session limit has been exceeded. It may be used to give a slightly more descriptive
	 * reason for the impending kill as opposed to simply "Session limit exceeded".
	 *
	 * This directive is optional, if not set, nothing will be sent.
	 */
	sessionlimitexceeded = "The session limit for your IP %IP% has been exceeded."
 
	/*
	 * Same as above, but should be used to provide a website address where users can find out more
	 * about session limits and how to go about applying for an exception.
	 *
	 * Note: This directive has been intentionally commented out in an effort to remind you to change
	 * the URL it contains. It is recommended that you supply an address/URL where people can get help
	 * regarding session limits.
	 *
	 * This directive is optional, if not set, nothing will be sent.
	 */
	#sessionlimitdetailsloc = "Please visit http://your.website.url/ for more information about session limits."
 
	/*
	 * If set and is not 0, this directive tells Services to add an AKILL if the number of subsequent kills
	 * for the same host exceeds this value, preventing the network from experiencing KILL floods.
	 *
	 * This directive is optional.
	 */
	maxsessionkill = 15
 
	/*
	 * Sets the expiry time for AKILLs set for hosts exceeding the maxsessionkill directive limit.
	 *
	 * This directive is optional, if not set, defaults to 30 minutes.
	 */
	sessionautokillexpiry = 30m
 
	/*
	 * Sets the CIDR value used to determine which IP addresses represent the same person.
	 * By default this would limit 3 connections per IPv4 IP and 3 connections per IPv6 IP.
	 * If you are receiving IPv6 clone attacks it may be useful to set session_ipv6_cidr to
	 * 64 or 48.
	 */
	session_ipv4_cidr = 32
	session_ipv6_cidr = 128
}
command { service = "OperServ"; name = "EXCEPTION"; command = "operserv/exception"; permission = "operserv/exception"; }
command { service = "OperServ"; name = "SESSION"; command = "operserv/session"; permission = "operserv/session"; }
 
/*
 * os_set
 *
 * Provides the command operserv/set.
 *
 * Used to set various settings such as superadmin, debug mode, etc.
 */
module
{
	name = "os_set"
 
	/*
	 * If set, Services Admins will be able to use SUPERADMIN [ON|OFF] which will temporarily grant
	 * them extra privileges such as being a founder on ALL channels.
	 *
	 * This directive is optional.
	 */
	#superadmin = yes
}
command { service = "OperServ"; name = "SET"; command = "operserv/set"; permission = "operserv/set"; }
 
/*
 * os_shutdown
 *
 * Provides the commands operserv/quit, operserv/restart, and operserv/shutdown.
 *
 * Used to quit, restart, or shutdown services.
 */
module { name = "os_shutdown" }
command { service = "OperServ"; name = "QUIT"; command = "operserv/quit"; permission = "operserv/quit"; }
command { service = "OperServ"; name = "RESTART"; command = "operserv/restart"; permission = "operserv/restart"; }
command { service = "OperServ"; name = "SHUTDOWN"; command = "operserv/shutdown"; permission = "operserv/shutdown"; }
 
/*
 * os_stats
 *
 * Provides the operserv/stats command.
 *
 * Used to show statistics about services.
 */
module { name = "os_stats" }
command { service = "OperServ"; name = "STATS"; command = "operserv/stats"; permission = "operserv/stats"; }
 
/*
 * os_svs
 *
 * Provides the commands operserv/svsnick, operserv/svsjoin, and operserv/svspart.
 *
 * Used to force users to change nicks, join and part channels.
 */
module { name = "os_svs" }
command { service = "OperServ"; name = "SVSNICK"; command = "operserv/svsnick"; permission = "operserv/svs"; }
command { service = "OperServ"; name = "SVSJOIN"; command = "operserv/svsjoin"; permission = "operserv/svs"; }
command { service = "OperServ"; name = "SVSPART"; command = "operserv/svspart"; permission = "operserv/svs"; }
 
/*
 * os_sxline
 *
 * Provides the operserv/snline and operserv/sqline commands.
 *
 * Used to ban real names, nick names, and possibly channels.
 */
module { name = "os_sxline" }
command { service = "OperServ"; name = "SNLINE"; command = "operserv/snline"; permission = "operserv/snline"; }
command { service = "OperServ"; name = "SQLINE"; command = "operserv/sqline"; permission = "operserv/sqline"; }
 
/*
 * os_update
 *
 * Provides the operserv/update command.
 *
 * Use to immediately update the databases.
 */
module { name = "os_update" }
command { service = "OperServ"; name = "UPDATE"; command = "operserv/update"; permission = "operserv/update"; }

BotServ

/*
 * Example configuration file for BotServ.
 */
 
/*
 * First, create the service. If you do not want to have a 'BotServ', but do want the ability to have
 * ChanServ assigned to channels for the use of fantasy commands, you may delete the below 'service' block.
 *
 * Note that deleting a 'service' block for a pseudoclient that is already online will not remove the
 * client, the client becomes no different from a normal service bot, so you will have to use botserv/bot
 * to manually delete the client.
 *
 * You may then waant to map some of the below commands to other services, like placing botserv/bot on
 * OperServ so you can delete the below client, and mapping assign and unassign to ChanServ so users are
 * able to control whether or not ChanServ is in the channel. You may also want to map botserv/set/nobot
 * to OperServ so you can restrict who can assign the other core service clients.
 */
service
{
	/*
	 * The name of the BotServ client.
	 * If you change this value, you probably want to change the client directive in the configuration for the botserv module too.
	 */
	nick = "BotServ"
 
	/*
	 * The username of the BotServ client.
	 */
	user = "services"
 
	/*
	 * The hostname of the BotServ client.
	 */
	host = "services.host"
 
	/*
	 * The realname of the BotServ client.
	 */
	gecos = "Bot Service"
 
	/*
	 * The modes this client should use.
	 * Do not modify this unless you know what you are doing.
	 *
	 * These modes are very IRCd specific. If left commented, sane defaults
	 * are used based on what protocol module you have loaded.
	 *
	 * Note that setting this option incorrectly could potentially BREAK some, if
	 * not all, usefulness of the client. We will not support you if this client is
	 * unable to do certain things if this option is enabled.
	 */
	#modes = "+o"
 
	/*
	 * An optional comma separated list of channels this service should join. Outside
	 * of log channels this is not very useful, as the service will just idle in the
	 * specified channels, and will not accept any types of commands.
	 *
	 * Prefixes may be given to the channels in the form of mode characters or prefix symbols.
	 */
	#channels = "@#services,#mychan"
}
 
/*
 * Core BotServ module.
 *
 * Provides essential functionality for BotServ.
 */
module
{
	name = "botserv"
 
	/*
	 * The name of the client that should be BotServ.
	 *
	 * This directive is optional.
	 */
	client = "BotServ"
 
	/*
	 * The default bot options for newly registered channels. Note that changing these options
	 * will have no effect on channels which are already registered. The list must be separated
	 * by spaces.
	 *
	 * The options are:
	 * -    dontkickops: Channel operators will be protected against BotServ kicks
	 * - dontkickvoices: Voiced users will be protected against BotServ kicks
	 * -          greet: The channel's BotServ bot will greet incoming users that have set a greet
	 *                     in their NickServ settings
	 * -        fantasy: Enables the use of BotServ fantasy commands in the channel
	 *
	 * This directive is optional, if left blank, there will be no defaults.
	 */
	defaults = "greet fantasy"
 
	/*
	 * The minimum number of users there must be in a channel before the bot joins it. The best
	 * value for this setting is 1 or 2. This can be 0, the service bots will not part unless
	 * specifically unassigned, and will keep the channel open.
	 */
	minusers = 1
 
	/*
	 * The bots are currently not affected by any modes or bans when they try to join a channel.
	 * But some people may want to make it act like a real bot, that is, for example, remove all
	 * the bans affecting the bot before joining the channel, remove a ban that affects the bot
	 * set by a user when it is in the channel, and so on. Since it consumes a bit more CPU
	 * time, you should not enable this on larger networks.
	 *
	 * This directive is optional.
	 */
	#smartjoin = yes
 
	/*
	 * Modes to set on service bots when they join channels, comment this out for no modes
	 *
	 * This directive is optional.
	 */
	botmodes = "ao"
 
	/*
	 * User modes to set on service bots. Read the comment about the service:modes directive
	 * on why this can be a bad idea to set.
	 */
	#botumodes = "i"
}
 
/*
 * Core BotServ commands.
 *
 * In Anope modules can provide (multiple) commands, each of which has a unique command name. Once these modules
 * are loaded you can then configure the commands to be added to any client you like with any name you like.
 *
 * Additionally, you may provide a permission name that must be in the opertype of users executing the command.
 *
 * Sane defaults are provided below that do not need to be edited unless you wish to change the default behavior.
 */
 
/* Give it a help command. */
command { service = "BotServ"; name = "HELP"; command = "generic/help"; }
 
/*
 * bs_assign
 *
 * Provides the commands:
 *   botserv/assign - Used to assign BotServ bots to channels
 *   botserv/unassign - Used to unassign BotServ bots
 *   botserv/set/nobot - Used to prohibit channels from being assigned BotServ bots.
 *
 * Used for assigning and unassigning bots to channels.
 */
module { name = "bs_assign" }
command { service = "BotServ"; name = "ASSIGN"; command = "botserv/assign"; }
command { service = "BotServ"; name = "UNASSIGN"; command = "botserv/unassign"; }
command { service = "BotServ"; name = "SET NOBOT"; command = "botserv/set/nobot"; permission = "botserv/set/nobot"; }
 
/*
 * bs_autoassign
 *
 * Allows service bots to be automatically assigned to channels upon registration.
 */
#module
{
	name = "bs_autoassign"
 
	/*
	 * Automatically assign ChanServ to channels upon registration.
	 */
	bot = "ChanServ"
}
 
/*
 * bs_badwords
 *
 * Provides the command botserv/badwords.
 *
 * Used for controlling the channel badword list.
 */
module
{
	name = "bs_badwords"
 
	/*
	 * The maximum number of entries a single bad words list can have.
	 */
	badwordsmax = 32
 
	/*
	 * If set, BotServ will use case sensitive checking for badwords.
	 *
	 * This directive is optional.
	 */
	#casesensitive = yes
}
command { service = "BotServ"; name = "BADWORDS"; command = "botserv/badwords"; }
 
/*
 * bs_bot
 *
 * Provides the command botserv/bot.
 *
 * Used for administrating BotServ bots.
 */
module { name = "bs_bot" }
command { service = "BotServ"; name = "BOT"; command = "botserv/bot"; }
 
/*
 * bs_botlist
 *
 * Provides the command botserv/botlist.
 *
 * Used for listing all available bots.
 */
module { name = "bs_botlist" }
command { service = "BotServ"; name = "BOTLIST"; command = "botserv/botlist"; }
 
/*
 * bs_control
 *
 * Provides the commands botserv/act and botserv/say.
 *
 * Used for making the bot message a channel.
 */
module { name = "bs_control" }
command { service = "BotServ"; name = "ACT"; command = "botserv/act"; }
command { service = "BotServ"; name = "SAY"; command = "botserv/say"; }
 
/*
 * bs_info
 *
 * Provides the command botserv/info.
 *
 * Used for getting information on bots or channels.
 */
module { name = "bs_info" }
command { service = "BotServ"; name = "INFO"; command = "botserv/info"; }
 
/*
 * bs_kick
 *
 * Provides the commands:
 *   botserv/kick - Dummy help wrapper for the KICK command.
 *   botserv/kick/amsg - Configures BotServ's AMSG kicker.
 *   botserv/kick/badwords - Configures BotServ's badwords kicker.
 *   botserv/kick/bolds - Configures BotServ's bold text kiceker.
 *   botserv/kick/caps - Configures BotServ's capital letters kicker.
 *   botserv/kick/colors - Configures BotServ's color kicker.
 *   botserv/kick/flood - Configures BotServ's flood kicker.
 *   botserv/kick/italics - Configures BotServ's italics kicker.
 *   botserv/kick/repeat - Configures BotServ's repeat kicker.
 *   botserv/kick/reverses - Configures BotServ's reverse kicker.
 *   botserv/kick/underlines - Configures BotServ's reverse kicker.
 *   botserv/set/dontkickops - Used for preventing BotServ from kicking channel operators.
 *   botserv/set/dontkickvoices - Used for preventing BotServ from kicking voices.
 *
 * Used for configuring what bots should kick for.
 */
module
{
	name = "bs_kick"
 
	/*
	 * The amount of time that data for a user is valid in BotServ. If the data exceeds this time,
	 * it is reset or deleted depending on the case. Do not set it too high, otherwise your
	 * resources will be slightly affected.
	 */
	keepdata = 10m
 
	/*
	 * If set, the bots will use a kick reason that does not state the word when it is kicking.
	 * This is especially useful if you have young people on your network.
	 *
	 * This directive is optional.
	 */
	gentlebadwordreason = yes
}
command { service = "BotServ"; name = "KICK"; command = "botserv/kick"; }
command { service = "BotServ"; name = "KICK AMSG"; command = "botserv/kick/amsg"; }
command { service = "BotServ"; name = "KICK BADWORDS"; command = "botserv/kick/badwords"; }
command { service = "BotServ"; name = "KICK BOLDS"; command = "botserv/kick/bolds"; }
command { service = "BotServ"; name = "KICK CAPS"; command = "botserv/kick/caps"; }
command { service = "BotServ"; name = "KICK COLORS"; command = "botserv/kick/colors"; }
command { service = "BotServ"; name = "KICK FLOOD"; command = "botserv/kick/flood"; }
command { service = "BotServ"; name = "KICK ITALICS"; command = "botserv/kick/italics"; }
command { service = "BotServ"; name = "KICK REPEAT"; command = "botserv/kick/repeat"; }
command { service = "BotServ"; name = "KICK REVERSES"; command = "botserv/kick/reverses"; }
command { service = "BotServ"; name = "KICK UNDERLINES"; command = "botserv/kick/underlines"; }
 
command { service = "BotServ"; name = "SET DONTKICKOPS"; command = "botserv/set/dontkickops"; }
command { service = "BotServ"; name = "SET DONTKICKVOICES"; command = "botserv/set/dontkickvoices"; }
 
 
/*
 * bs_set
 *
 * Provides the commands:
 *   botserv/set/private - Used to prohibit specific BotServ bots from being assigned to channels.
 */
module { name = "bs_set" }
command { service = "BotServ"; name = "SET"; command = "botserv/set"; }
command { service = "BotServ"; name = "SET BANEXPIRE"; command = "botserv/set/banexpire"; }
command { service = "BotServ"; name = "SET PRIVATE"; command = "botserv/set/private"; permission = "botserv/set/private"; }
 
/*
 * greet
 *
 * Provides the commands:
 *   botserv/set/greet - Used for enabling or disabling BotServ's greet messages in a channel.
 *   nickserv/set/greet, nickserv/saset/greet - Used for changing a users greet message, which is displayed when they enter channels.
 */
module { name = "greet" }
command { service = "BotServ"; name = "SET GREET"; command = "botserv/set/greet"; }
command { service = "NickServ"; name = "SET GREET"; command = "nickserv/set/greet"; }
command { service = "NickServ"; name = "SASET GREET"; command = "nickserv/saset/greet"; permission = "nickserv/saset/greet"; }
 
/*
 * GREET privilege.
 *
 * Used by 'greet'.
 *
 * Users with this privilege have their greet shown when they join channels.
 */
privilege
{
	name = "GREET"
	rank = 40
	level = 5
	flag = "g"
	xop = "AOP"
}
 
 
/*
 * fantasy
 *
 * Allows 'fantaisist' commands to be used in channels.
 *
 * Provides the commands:
 *   botserv/set/fantasy - Used for enabling or disabling BotServ's fantasist commands.
 */
module
{
	name = "fantasy"
 
	/*
	 * Defines the prefixes for fantasy commands in channels. One of these characters will have to be prepended
	 * to all fantasy commands. If you choose "!", for example, fantasy commands will be "!kick",
	 * "!op", etc. This directive is optional, if left out, the default fantasy character is "!".
	 */
	#fantasycharacter = "!."
}
command { service = "BotServ"; name = "SET FANTASY"; command = "botserv/set/fantasy"; }
 
/*
 * Fantasy commands
 *
 * Fantasy commands can be executed in channels that have a BotServ bot by prefixing the
 * command with one of the fantasy characters configured in botserv's fantasycharacter
 * directive.
 *
 * Sane defaults are provided below that do not need to be edited unless you wish to change the default behavior.
 */
fantasy { name = "ACCESS"; command = "chanserv/access"; }
fantasy { name = "AKICK"; command = "chanserv/akick"; }
fantasy { name = "AOP"; command = "chanserv/xop"; }
fantasy { name = "BAN"; command = "chanserv/ban"; }
fantasy { name = "CLONE"; command = "chanserv/clone"; }
fantasy { name = "DEHALFOP"; command = "chanserv/modes"; }
fantasy { name = "DEOP"; command = "chanserv/modes"; }
fantasy { name = "DEOWNER"; command = "chanserv/modes"; }
fantasy { name = "DEPROTECT"; command = "chanserv/modes"; }
fantasy { name = "DEVOICE"; command = "chanserv/modes"; }
fantasy { name = "DOWN"; command = "chanserv/down"; }
fantasy { name = "ENFORCE"; command = "chanserv/enforce"; }
fantasy { name = "ENTRYMSG"; command = "chanserv/entrymsg"; }
fantasy { name = "FLAGS"; command = "chanserv/flags"; }
fantasy { name = "HALFOP"; command = "chanserv/modes"; }
fantasy { name = "HELP"; command = "generic/help"; prepend_channel = false; }
fantasy { name = "HOP"; command = "chanserv/xop"; }
fantasy { name = "INFO"; command = "chanserv/info"; prepend_channel = false; }
fantasy { name = "INVITE"; command = "chanserv/invite"; }
fantasy { name = "K"; command = "chanserv/kick"; }
fantasy { name = "KB"; command = "chanserv/ban"; }
fantasy { name = "KICK"; command = "chanserv/kick"; }
fantasy { name = "LEVELS"; command = "chanserv/levels"; }
fantasy { name = "LIST"; command = "chanserv/list"; prepend_channel = false; }
fantasy { name = "LOG"; command = "chanserv/log"; }
fantasy { name = "MODE"; command = "chanserv/mode"; }
fantasy { name = "MUTE"; command = "chanserv/ban"; kick = no; mode = "QUIET"; }
fantasy { name = "OP"; command = "chanserv/modes"; }
fantasy { name = "OWNER"; command = "chanserv/modes"; }
fantasy { name = "PROTECT"; command = "chanserv/modes"; }
fantasy { name = "QOP"; command = "chanserv/xop"; }
fantasy { name = "SEEN"; command = "chanserv/seen"; prepend_channel = false; }
fantasy { name = "SOP"; command = "chanserv/xop"; }
fantasy { name = "STATUS"; command = "chanserv/status"; }
fantasy { name = "SUSPEND"; command = "chanserv/suspend"; permission = "chanserv/suspend"; }
fantasy { name = "SYNC"; command = "chanserv/sync"; }
fantasy { name = "TOPIC"; command = "chanserv/topic"; }
fantasy { name = "UNBAN"; command = "chanserv/unban"; }
fantasy { name = "UNSUSPEND"; command = "chanserv/unsuspend"; permission = "chanserv/suspend"; }
fantasy { name = "UP"; command = "chanserv/up"; }
fantasy { name = "VOICE"; command = "chanserv/modes"; }
fantasy { name = "VOP"; command = "chanserv/xop"; }

HostServ

/*
 * Example configuration file for HostServ.
 */
 
/*
 * First, create the service.
 */
service
{
	/*
	 * The name of the HostServ client.
	 * If you change this value, you probably want to change the client directive in the configuration for the hostserv module too.
	 */
	nick = "HostServ"
 
	/*
	 * The username of the HostServ client.
	 */
	user = "services"
 
	/*
	 * The hostname of the HostServ client.
	 */
	host = "services.host"
 
	/*
	 * The realname of the HostServ client.
	 */
	gecos = "vHost Service"
 
	/*
	 * The modes this client should use.
	 * Do not modify this unless you know what you are doing.
	 *
	 * These modes are very IRCd specific. If left commented, sane defaults
	 * are used based on what protocol module you have loaded.
	 *
	 * Note that setting this option incorrectly could potentially BREAK some, if
	 * not all, usefulness of the client. We will not support you if this client is
	 * unable to do certain things if this option is enabled.
	 */
	#modes = "+o"
 
	/*
	 * An optional comma separated list of channels this service should join. Outside
	 * of log channels this is not very useful, as the service will just idle in the
	 * specified channels, and will not accept any types of commands.
	 *
	 * Prefixes may be given to the channels in the form of mode characters or prefix symbols.
	 */
	#channels = "@#services,#mychan"
}
 
/*
 * Core HostServ module.
 *
 * Provides essential functionality for HostServ.
 */
module
{
	name = "hostserv"
 
	/*
	 * The name of the client that should be HostServ.
	 */
	client = "HostServ"
 
	/*
	 * If enabled, vhosts are activated on users immediately when they are set.
	 */
	activate_on_set = false
}
 
/*
 * Core HostServ commands.
 *
 * In Anope modules can provide (multiple) commands, each of which has a unique command name. Once these modules
 * are loaded you can then configure the commands to be added to any client you like with any name you like.
 *
 * Additionally, you may provide a permission name that must be in the opertype of users executing the command.
 *
 * Sane defaults are provided below that do not need to be edited unless you wish to change the default behavior.
 */
 
/* Give it a help command. */
command { service = "HostServ"; name = "HELP"; command = "generic/help"; }
 
/*
 * hs_del
 *
 * Provides the commands hostserv/del and hostserv/delall.
 *
 * Used for removing users' vHosts.
 */
module { name = "hs_del" }
command { service = "HostServ"; name = "DEL"; command = "hostserv/del"; permission = "hostserv/del"; }
command { service = "HostServ"; name = "DELALL"; command = "hostserv/delall"; permission = "hostserv/del"; }
 
/*
 * hs_group
 *
 * Provides the command hostserv/group.
 *
 * Used for grouping one vHost to many nicks.
 */
module
{
	name = "hs_group"
 
	/*
	 * Upon nickserv/group, this option syncs the nick's main vHost to the grouped nick.
	 */
	syncongroup = false
 
	/*
	 * This makes vhosts act as if they are per account.
	 */
	synconset = false
}
command { service = "HostServ"; name = "GROUP"; command = "hostserv/group"; }
 
/*
 * hs_list
 *
 * Provides the command hostserv/list.
 *
 * Used for listing actively set vHosts.
 */
module { name = "hs_list" }
command { service = "HostServ"; name = "LIST"; command = "hostserv/list"; permission = "hostserv/list"; }
 
/*
 * hs_off
 *
 * Provides the command hostserv/off.
 *
 * Used for turning off your vHost.
 */
module { name = "hs_off" }
command { service = "HostServ"; name = "OFF"; command = "hostserv/off"; }
 
/*
 * hs_on
 *
 * Provides the command hostserv/on.
 *
 * Used for turning on your vHost.
 */
module { name = "hs_on" }
command { service = "HostServ"; name = "ON"; command = "hostserv/on"; }
 
/*
 * hs_request
 *
 * Provides the commands hostserv/request, hostserv/activate, hostserv/reject, and hostserv/waiting.
 *
 * Used to manage vHosts requested by users.
 */
module
{
	name = "hs_request"
 
	/*
	 * If set, Services will send a memo to the user requesting a vHost when it's been
	 * approved or rejected.
	 */
	#memouser = yes
 
	/*
	 * If set, Services will send a memo to all Services staff when a new vHost is requested.
	 */
	#memooper = yes
}
command { service = "HostServ"; name = "REQUEST"; command = "hostserv/request"; }
command { service = "HostServ"; name = "ACTIVATE"; command = "hostserv/activate"; permission = "hostserv/set"; }
command { service = "HostServ"; name = "REJECT"; command = "hostserv/reject"; permission = "hostserv/set"; }
command { service = "HostServ"; name = "WAITING"; command = "hostserv/waiting"; permission = "hostserv/set"; }
 
/*
 * hs_set
 *
 * Provides the commands hostserv/set and hostserv/setall.
 *
 * Used for setting users' vHosts.
 */
module { name = "hs_set" }
command { service = "HostServ"; name = "SET"; command = "hostserv/set"; permission = "hostserv/set"; }
command { service = "HostServ"; name = "SETALL"; command = "hostserv/setall"; permission = "hostserv/set"; }

Other Configuration

Global

/*
 * Example configuration file for Global.
 */
 
/*
 * First, create the service.
 */
service
{
	/*
	 * The name of the Global client.
	 * If you change this value, you probably want to change the client directive in the configuration for the global module too.
	 */
	nick = "Global"
 
	/*
	 * The username of the Global client.
	 */
	user = "services"
 
	/*
	 * The hostname of the Global client.
	 */
	host = "services.host"
 
	/*
	 * The realname of the Global client.
	 */
	gecos = "Global Noticer"
 
	/*
	 * The modes this client should use.
	 * Do not modify this unless you know what you are doing.
	 *
	 * These modes are very IRCd specific. If left commented, sane defaults
	 * are used based on what protocol module you have loaded.
	 *
	 * Note that setting this option incorrectly could potentially BREAK some, if
	 * not all, usefulness of the client. We will not support you if this client is
	 * unable to do certain things if this option is enabled.
	 */
	#modes = "+o"
 
	/*
	 * An optional comma separated list of channels this service should join. Outside
	 * of log channels this is not very useful, as the service will just idle in the
	 * specified channels, and will not accept any types of commands.
	 *
	 * Prefixes may be given to the channels in the form of mode characters or prefix symbols.
	 */
	#channels = "@#services,#mychan"
}
 
/*
 * Core Global module.
 *
 * Provides essential functionality for Global.
 */
module
{
	name = "global"
 
	/*
	 * The name of the client that should be Global.
	 */
	client = "Global"
 
	/*
	 * This is the global message that will be sent when Services are being
	 * shutdown/restarted.
	 *
	 * This directive is optional.
	 */
	#globaloncycledown = "Services are restarting, they will be back shortly - please be good while we're gone"
 
	/*
	 * This is the global message that will be sent when Services (re)join the
	 * network.
	 *
	 * This directive is optional.
	 */
	#globaloncycleup = "Services are now back online - have a nice day"
 
	/*
	 * If set, Services will hide the IRC Operator's nick in a global
	 * message/notice.
	 *
	 * This directive is optional.
	 */
	#anonymousglobal = yes
}
 
/*
 * Core Global commands.
 *
 * In Anope modules can provide (multiple) commands, each of which has a unique command name. Once these modules
 * are loaded you can then configure the commands to be added to any client you like with any name you like.
 *
 * Additionally, you may provide a permission name that must be in the opertype of users executing the command.
 *
 * Sane defaults are provided below that do not need to be edited unless you wish to change the default behavior.
 */
 
/* Give it a help command. */
command { service = "Global"; name = "HELP"; command = "generic/help"; }
 
/*
 * gl_global
 *
 * Provides the command global/global.
 *
 * Used for sending a message to every online user.
 */
module { name = "gl_global" }
command { service = "Global"; name = "GLOBAL"; command = "global/global"; permission = "global/global"; }

Modules

/*
 * [OPTIONAL] Non-Core Modules
 *
 * The following blocks are used to load all non-core modules, including 3rd-party modules.
 * Modules can be prevented from loading by commenting out the line, other modules can be added by
 * adding a module block. These modules will be loaded prior to Services connecting to your network.
 *
 * Note that some of these modules are labeled EXTRA, and must be enabled prior to compiling by
 * running the 'extras' script on Linux and UNIX.
 */
 
/*
 * help
 *
 * Provides the command generic/help.
 *
 * This is a generic help command that can be used with any client.
 */
module { name = "help" }
 
/*
 * m_dns
 *
 * Adds support for the DNS protocol. By itself this module does nothing useful,
 * but other modules such as m_dnsbl and os_dns require this.
 */
#module
{
	name = "m_dns"
 
	/*
	 * The nameserver to use for resolving hostnames, must be an IP or a resolver configuration file.
	 * The below should work fine on all unix like systems. Windows users will have to find their nameservers
	 * from ipconfig /all and put the IP here.
	 */
	nameserver = "/etc/resolv.conf"
	#nameserver = "127.0.0.1"
 
	/*
	 * How long to wait in seconds before a DNS query has timed out.
	 */
	timeout = 5
 
 
	/* Only edit below if you are expecting to use os_dns or otherwise answer DNS queries. */
 
	/*
	 * The IP and port services use to listen for DNS queries.
	 * Note that ports less than 1024 are privileged on UNIX/Linux systems, and
	 * require Anope to be started as root. If you do this, it is recommended you
	 * set options:user and options:group so Anope can change users after binding
	 * to this port.
	 */
	ip = "0.0.0.0"
	port = 53
 
 
	/*
	 * SOA record information.
	 */
 
	/* E-mail address of the DNS administrator. */
	admin = "admin@example.com"
 
	/* This should be the names of the public facing nameservers serving the records. */
	nameservers = "ns1.example.com ns2.example.com"
 
	/* The time slave servers are allowed to cache. This should be reasonably low
	 * if you want your records to be updated without much delay.
	 */
	refresh = 3600
 
	/* A notify block. There should probably be one per nameserver listed in 'nameservers'.
	 */
	notify
	{
		ip = "192.0.2.0"
		port = 53
	}
}
 
/*
 * m_dnsbl
 *
 * Allows configurable DNS blacklists to check connecting users against. If a user
 * is found on the blacklist they will be immediately banned. This is a crucial module
 * to prevent bot attacks.
 */
#module
{
	name = "m_dnsbl"
 
	/*
	 * If set, Services will check clients against the DNSBLs when services connect to its uplink.
	 * This is not recommended, and on large networks will open a very large amount of DNS queries.
	 * Whilst services are not drastically affected by this, your nameserver/DNSBL might care.
	 */
	check_on_connect = no
 
	/*
	 * If set, Services will check clients when coming back from a netsplit. This can cause a large number
	 * of DNS queries open at once. Whilst services are not drastically affected by this, your nameserver/DNSBL
	 * might care.
	 */
	check_on_netburst = no
 
	/*
	 * If set, OperServ will add clients found in the DNSBL to the akill list. Without it, OperServ simply sends
	 * a timed G/K-line to the IRCd and forgets about it. Can be useful if your akill list is being fill up by bots.
	 */
	add_to_akill = yes
 
	blacklist
	{
		/* Name of the blacklist. */
		name = "rbl.efnetrbl.org"
 
		/* How long to set the ban for. */
		time = 4h
 
		/* Reason for akill.
		 * %n is the nick of the user
		 * %u is the ident/username of the user
		 * %g is the realname of the user
		 * %h is the hostname of the user
		 * %i is the IP of the user
		 * %r is the reason (configured below). Will be nothing if not configured.
		 * %N is the network name set in networkinfo:networkname
		 */
		reason = "You are listed in the efnet RBL, visit http://rbl.efnetrbl.org/?i=%i for info"
 
		/* Replies to ban and their reason. If this is totally omitted all replies get banned. */
		1 = "Open Proxy"
		/* Don't ban for result 2 or 3 */
		#2 = "spamtrap666"
		#3 = "spamtrap50"
		4 = "TOR"
		5 = "Drones / Flooding"
	}
 
	blacklist
	{
		name = "dnsbl.dronebl.org"
		time = 4h
		reason = "You have a host listed in the DroneBL. For more information, visit http://dronebl.org/lookup_branded?ip=%i&network=%N"
	}
}
 
/*
 * m_helpchan
 *
 * Gives users who are op in the specified help channel usermode +h (helpop).
 */
#module
{
	name = "m_helpchan"
 
	helpchannel = "#help"
}
 
/*
 * m_httpd
 *
 * Allows services to serve web pages. By itself, this module does nothing useful.
 *
 * Note that using this will allow users to get the IP of your services.
 * To prevent this we recommend using a reverse proxy or a tunnel.
 */
#module
{
	name = "m_httpd"
 
	httpd
	{
		/* Name of this service. */
		name = "httpd/main"
 
		/* IP to listen on. */
		ip = "0.0.0.0"
 
		/* Port to listen on. */
		port = 8080
 
		/* Time before connections to this server are timed out. */
		timeout = 30
 
		/* Listen using SSL. Requires an SSL module. */
		#ssl = yes
 
		/* If you are using a reverse proxy that sends one of the
		 * extforward_headers set below, set this to its IP.
		 * This allows services to obtain the real IP of users by
		 * reading the forwarded-for HTTP header.
		 */
		#extforward_ip = "192.168.0.255"
 
		/* The header to look for. These probably work as is. */
		extforward_header = "X-Forwarded-For Forwarded-For"
	}
}
 
/*
 * m_ldap [EXTRA]
 *
 * This module allows other modules to use LDAP. By itself, this module does nothing useful.
 */
#module
{
	name = "m_ldap"
 
	ldap
	{
		server = "ldap://127.0.0.1"
		port = 389
 
		/*
		 * Admin credentials used for performing searches and adding users.
		 */
		admin_binddn = "cn=Manager,dc=anope,dc=org"
		admin_password = "secret"
	}
}
 
/*
 * m_ldap_authentication [EXTRA]
 *
 * This module allows many commands such as IDENTIFY, RELEASE, RECOVER, GHOST, etc. use
 * LDAP to authenticate users. Requires m_ldap.
*/
#module
{
	name = "m_ldap_authentication"
 
	/*
	 * The distinguished name used for searching for users's accounts.
	 */
	basedn = "ou=users,dc=anope,dc=org"
 
	/*
	 * The search filter used to look up users's accounts.
	 * %account is replaced with the user's account.
	 * %object_class is replaced with the object_class configured below.
	 */
	search_filter = "(&(uid=%account)(objectClass=%object_class))"
 
	/*
	 * The object class used by LDAP to store user account information.
	 * This is used for adding new users to LDAP if registration is allowed.
	 */
	object_class = "anopeUser"
 
	/*
	 * The attribute value used for account names.
	 */
	username_attribute = "uid"
 
	/*
	 * The attribute value used for email addresses.
	 * This directive is optional.
	 */
	email_attribute = "email"
 
	/*
	 * The attribute value used for passwords.
	 * Used when registering new accounts in LDAP.
	 */
	password_attribute = "userPassword"
 
	/*
	 * If set, the reason to give the users who try to "/msg NickServ REGISTER".
	 * If not set, then registration is not blocked.
	 */
	#disable_register_reason = "To register on this network visit http://some.misconfigured.site/register"
 
	/*
	 * If set, the reason to give the users who try to "/msg NickServ SET EMAIL".
	 * If not set, then email changing is not blocked.
	 */
	#disable_email_reason = "To change your email address visit http://some.misconfigured.site"
}
 
/*
 * m_ldap_oper [EXTRA]
 *
 * This module dynamically ties users to Anope opertypes when they identify
 * via LDAP group membership. Requires m_ldap.
 *
 * Note that this doesn't give the user privileges on the IRCd, only in Services.
 */
#module
{
	name = "m_ldap_oper"
 
	/*
	 * An optional binddn to use when searching for groups.
	 * %a is replaced with the account name of the user.
	 */
	#binddn = "cn=Manager,dc=anope,dc=org"
 
	/*
	 * An optional password to bind with.
	 */
	#password = "secret"
 
	/*
	 * The base DN where the groups are.
	 */
	basedn = "ou=groups,dc=anope,dc=org"
 
	/*
	 * The filter to use when searching for users.
	 * %a is replaced with the account name of the user.
	 */
	filter = "(member=uid=%a,ou=users,dc=anope,dc=org)"
 
	/*
	 * The attribute of the group that is the name of the opertype.
	 * The cn attribute should match a known opertype in the config.
	 */
	opertype_attribute = "cn"
}
 
/*
 * m_mysql [EXTRA]
 *
 * This module allows other modules to use MySQL.
 */
#module
{
	name = "m_mysql"
 
	mysql
	{
		/* The name of this service. */
		name = "mysql/main"
		database = "anope"
		server = "127.0.0.1"
		username = "anope"
		password = "mypassword"
		port = 3306
	}
}
/*
 * m_redis
 *
 * This module allows other modules to use Redis.
 */
#module
{
	name = "m_redis"
 
	/* A redis database */
	redis
	{
		/* The name of this service */
		name = "redis/main"
 
		/*
		 * The redis database to use. New connections default to 0.
		 */
		db = 0
 
		ip = "127.0.0.1"
		port = 6379
	}
}
 
/*
 * m_regex_pcre [EXTRA]
 *
 * Provides the regex engine regex/pcre, which uses the Perl Compatible Regular Expressions library.
 */
#module { name = "m_regex_pcre" }
 
/*
 * m_regex_posix [EXTRA]
 *
 * Provides the regex engine regex/posix, which uses the POSIX compliant regular expressions.
 * This is likely the only regex module you will not need extra libraries for.
 */
#module { name = "m_regex_posix" }
 
/*
 * m_regex_tre [EXTRA]
 *
 * Provides the regex engine regex/tre, which uses the TRE regex library.
 */
#module { name = "m_regex_tre" }
 
/*
 * m_rewrite
 *
 * Allows rewriting commands sent to/from clients.
 */
#module { name = "m_rewrite" }
#command
{
	service = "ChanServ"; name = "CLEAR"; command = "rewrite"
 
	/* Enable m_rewrite. */
	rewrite = true
 
	/* Source message to match. A $ can be used to match anything. */
	rewrite_source = "CLEAR $ USERS"
 
	/*
	 * Message to rewrite the source message to. A $ followed by a number, eg $0, gets
	 * replaced by the number-th word from the source_message, starting from 0.
	 */
	rewrite_target = "KICK $1 *"
 
	/*
	 * The command description. This only shows up in HELP's output.
	 * Comment this option to prevent the command from showing in the
	 * HELP command.
	 */
	rewrite_description = "Clears all users from a channel"
}
 
/*
 * m_proxyscan
 *
 * This module allows you to scan connecting clients for open proxies.
 * Note that using this will allow users to get the IP of your services.
 *
 * Currently the two supported proxy types are HTTP and SOCKS5.
 *
 * The proxy scanner works by attempting to connect to clients when they
 * connect to the network, and if they have a proxy running instruct it to connect
 * back to services. If services are able to connect through the proxy to itself
 * then it knows it is an insecure proxy, and will ban it.
 */
#module
{
	name = "m_proxyscan"
 
	/*
	 * The target IP services tells the proxy to connect back to. This must be a publicly
	 * available IP that remote proxies can connect to.
	 */
	#target_ip = "127.0.0.1"
 
	/*
	 * The port services tells the proxy to connect to.
	 */
	target_port = 7226
 
	/*
	 * The listen IP services listen on for incoming connections from suspected proxies.
	 * This probably will be the same as target_ip, but may not be if you are behind a firewall (NAT).
	 */
	#listen_ip = "127.0.0.1"
 
	/*
	 * The port services should listen on for incoming connections from suspected proxies.
	 * This most likely will be the same as target_port.
	 */
	listen_port = 7226
 
	/*
	 * An optional notice sent to clients upon connect.
	 */
	#connect_notice = "We will now scan your host for insecure proxies. If you do not consent to this scan please disconnect immediately."
 
	/*
	 * Who the notice should be sent from.
	 */
	#connect_source = "OperServ"
 
	/*
	 * If set, OperServ will add infected clients to the akill list. Without it, OperServ simply sends
	 * a timed G/K-line to the IRCd and forgets about it. Can be useful if your akill list is being filled up by bots.
	 */
	add_to_akill = yes
 
	/*
	 * How long before connections should be timed out.
	 */
	timeout = 5
 
	proxyscan
	{
		/* The type of proxy to check for. A comma separated list is allowed. */
		type = "HTTP"
 
		/* The ports to check. */
		port = "80,8080"
 
		/* How long to set the ban for. */
		time = 4h
 
		/*
		 * The reason to ban the user for.
		 * %h is replaced with the type of proxy found.
		 * %i is replaced with the IP of proxy found.
		 * %p is replaced with the port.
		 */
		reason = "You have an open proxy running on your host (%t:%i:%p)"
	}
}
 
/*
 * m_sasl
 *
 * Some IRCds allow "SASL" authentication to let users identify to Services
 * during the IRCd user registration process. If this module is loaded, Services will allow
 * authenticating users through this mechanism. Supported mechanisms are:
 * PLAIN, EXTERNAL.
 */
#module { name = "m_sasl" }
 
/*
 * m_sasl_dh-aes [EXTRA]
 *
 * Add the DH-AES mechanism to SASL.
 * Requires m_sasl to be loaded.
 * Requires openssl.
 */
#module { name = "m_sasl_dh-aes" }
 
/*
 * m_sasl_dh-blowfish [EXTRA]
 *
 * Add the DH-BLOWFISH mechanism to SASL.
 * Requires m_sasl to be loaded.
 * Requires openssl.
 */
#module { name = "m_sasl_dh-blowfish" }
 
/*
 * m_ssl_gnutls [EXTRA]
 *
 * This module provides SSL services to Anope using GnuTLS, for example to
 * connect to the uplink server(s) via SSL.
 *
 * You may only load either m_ssl_gnutls or m_ssl_openssl, bot not both.
 */
#module
{
	name = "m_ssl_gnutls"
 
	/*
	 * An optional certificate and key for m_ssl_gnutls to give to the uplink.
	 *
	 * You can generate your own certificate and key pair by using:
	 *
	 *   certtool --generate-privkey --bits 2048 --outfile anope.key
	 *   certtool --generate-self-signed --load-privkey anope.key --outfile anope.crt
	 *
	 */
	cert = "data/anope.crt"
	key = "data/anope.key"
 
	/*
	 * Diffie-Hellman parameters to use when acting as a server. This is only
	 * required for TLS servers that want to use ephemeral DH cipher suites.
	 *
	 * This is NOT required for Anope to connect to the uplink server(s) via SSL.
	 *
	 * You can generate DH parameters by using:
	 *
	 *   certtool --generate-dh-params --bits 2048 --outfile dhparams.pem
	 *
	 */
#	dhparams = "data/dhparams.pem"
}
 
/*
 * m_ssl_openssl [EXTRA]
 *
 * This module provides SSL services to Anope using OpenSSL, for example to
 * connect to the uplink server(s) via SSL.
 *
 * You may only load either m_ssl_openssl or m_ssl_gnutls, bot not both.
 *
 */
#module
{
	name = "m_ssl_openssl"
 
	/*
	 * An optional certificate and key for m_ssl_openssl to give to the uplink.
	 *
	 * You can generate your own certificate and key pair by using:
	 *
	 *   openssl genrsa -out anope.key 2048
	 *   openssl req -new -x509 -key anope.key -out anope.crt -days 1095
	 */
	cert = "data/anope.crt"
	key = "data/anope.key"
}
 
/*
 * m_sql_authentication [EXTRA]
 *
 * This module allows authenticating users against an external SQL database using a custom
 * query.
 */
#module
{
	name = "m_sql_authentication"
 
	/* SQL engine to use. Should be configured elsewhere with m_mysql, m_sqlite, etc. */
	engine = "mysql/main"
 
	/* Query to execute to authenticate. A non empty result from this query is considered a success,
	 * and the user will be authenticated.
	 *
	 * @a@ is replaced with the user's account name
	 * @p@ is replaced with the user's password
	 * @n@ is replaced with the user's nickname
	 * @i@ is replaced with the user's IP
	 *
	 * Note that @n@ and @i@ may not always exist in the case of a user identifying outside of the normal
	 * nickserv/identify command, such as through the web panel.
	 *
	 * Furthermore, if a field named email is returned from this query the user's email is
	 * set to its value.
	 *
	 *
	 * We've included some example queries for some popular website/forum systems.
	 *
	 * Drupal 6: "SELECT `mail` AS `email` FROM `users` WHERE `name` = @a@ AND `pass` = MD5(@p@) AND `status` = 1"
	 * e107 cms: "SELECT `user_email` AS `email` FROM `e107_user` WHERE `user_loginname` = @a@ AND `user_password` = MD5(@p@)"
	 * SMF Forum: "SELECT `email_address` AS `email` FROM `smf_members` WHERE `member_name` = @a@ AND `passwd` = SHA1(CONCAT(LOWER(@a@), @p@))"
	 * vBulletin: "SELECT `email` FROM `user` WHERE `username` = @a@ AND `password` = MD5(CONCAT(MD5(@p@), `salt`))"
	 * IP.Board: "SELECT `email` FROM `ibf_members` WHERE `name` = @a@ AND `members_pass_hash` = MD5(CONCAT(MD5(`members_pass_salt`), MD5(@p@)))"
	 */
	query = "SELECT `email_addr` AS `email` FROM `my_users` WHERE `username` = @a@ AND `password` = MD5(CONCAT('salt', @p@))"
 
	/*
	 * If set, the reason to give the users who try to "/msg NickServ REGISTER".
	 * If not set, then registration is not blocked.
	 */
	#disable_reason = "To register on this network visit http://some.misconfigured.site/register"
 
	/*
	 * If set, the reason to give the users who try to "/msg NickServ SET EMAIL".
	 * If not set, then email changing is not blocked.
	 */
	#disable_email_reason = "To change your email address visit http://some.misconfigured.site"
}
 
/*
 * m_sql_log [EXTRA]
 *
 * This module adds an additional target option to log{} blocks
 * that allows logging Service's logs to SQL. To log to SQL, add
 * the SQL service name to log:targets prefixed by sql_log:. For
 * example:
 *
 * log
 * {
 *     targets = "services.log sql_log:mysql/main"
 *     ...
 * }
 *
 * By default this module logs to the table `logs`, and will create
 * it if it doesn't exist. This module does not create any indexes (keys)
 * on the table and it is recommended you add them yourself as necessary.
 */
#module { name = "m_sql_log" }
 
/*
 * m_sql_oper [EXTRA]
 *
 * This module allows granting users services operator privileges and possibly IRC Operator
 * privileges based on an external SQL database using a custom query.
 */
#module
{
	name = "m_sql_oper"
 
	/* SQL engine to use. Should be configured elsewhere with m_mysql, m_sqlite, etc. */
	engine = "mysql/main"
 
	/* Query to execute to determine if a user should have operator privileges.
	 * A field named opertype must be returned in order to link the user to their oper type.
	 * The oper types must be configured earlier in services.conf.
	 *
	 * If a field named modes is returned from this query then those modes are set on the user.
	 * Without this, only a simple +o is sent.
	 *
	 * @a@ is replaced with the user's account name
	 * @i@ is replaced with the user's IP
	 */
	query = "SELECT `opertype` FROM `my_users` WHERE `user_name` = @a@"
}
 
/*
 * m_sqlite [EXTRA]
 *
 * This module allows other modules to use SQLite.
 */
#module
{
	name = "m_sqlite"
 
	/* A SQLite database */
	sqlite
	{
		/* The name of this service. */
		name = "sqlite/main"
 
		/* The database name, it will be created if it does not exist. */
		database = "anope.db"
	}
}
 
/*
 * webcpanel
 *
 * This module creates a web configuration panel that allows users and operators to perform any task
 * as they could over IRC. If you are using the default configuration you should be able to access
 * this panel by visiting http://127.0.0.1:8080 in your web browser from the machine Anope is running on.
 *
 * This module requires m_httpd.
 */
#module
{
	name = "webcpanel"
 
	/* Web server to use. */
	server = "httpd/main";
 
	/* Template to use. */
	template = "default";
 
	/* Page title. */
	title = "Anope IRC Services";
}
 
/*
 * m_xmlrpc
 *
 * Allows remote applications (websites) to execute queries in real time to retrieve data from Anope.
 * By itself this module does nothing, but allows other modules (m_xmlrpc_main) to receive and send XMLRPC queries.
 */
#module
{
	name = "m_xmlrpc"
 
	/* Web service to use. Requires m_httpd. */
	server = "httpd/main"
}
 
/*
 * m_xmlrpc_main
 *
 * Adds the main XMLRPC core functions.
 * Requires m_xmlrpc.
 */
#module { name = "m_xmlrpc_main" }

</code>

irc2sql

/*
 * Example configuration file for the irc2sql gateway
 *
 */
 
service
{
	/*
	 * The name of the StatServ client.
	 */
	nick = "StatServ"
 
	/*
	 * The username of the StatServ client.
	 */
	user = "StatServ"
 
	/*
	 * The hostname of the StatServ client.
	 */
	host = "services.host"
 
	/*
	 * The realname of the StatServ client.
	 */
	gecos = "Statistical Service"
 
	/*
	 * The modes this client should use.
	 * Do not modify this unless you know what you are doing.
	 *
	 * These modes are very IRCd specific. If left commented, sane defaults
	 * are used based on what protocol module you have loaded.
	 *
	 * Note that setting this option incorrectly could potentially BREAK some, if
	 * not all, usefulness of the client. We will not support you if this client is
	 * unable to do certain things if this option is enabled.
	 */
	#modes = "+o"
 
	/*
	 * An optional comma separated list of channels this service should join. Outside
	 * of log channels this is not very useful, as the service will just idle in the
	 * specified channels, and will not accept any types of commands.
	 *
	 * Prefixes may be given to the channels in the form of mode characters or prefix symbols.
	 */
	#channels = "@#services,#mychan"
}
 
module
{
	name = "irc2sql"
 
	/*
	 * The name of the client that should send the CTCP VERSION requests.
	 * It must already exist or must be defined in the following service block.
	 */
	client = "StatServ"
 
	/* 
	 * The name of the SQL engine to use.
	 * This must be MySQL and must match the name in the mysql{} block
	 */
	engine = "mysql/main"
 
	/*
	 * An optional prefix to prepended to the name of each created table.
	 * Do not use the same prefix for other programs.
	 */
	prefix = "anope_"
 
	/*
	 * GeoIP - Automatically adds users geoip location to the user table.
	 * Tables are created by irc2sql, you have to run the
	 * geoipupdate script after you started Anope to download
	 * and import the GeoIP database.
	 *
	 * The geoip database can be the smaller "country" database or the
	 * larger "city" database. Comment to disable geoip lookup.
	 */
	geoip_database = "country"
 
	/*
	 * Get the CTCP version from users
	 * The users connecting to the network will receive a CTCP VERSION
	 * request from the above configured services client
	 */
	ctcpuser = "yes"
 
	/*
	 * Send out CTCP VERSION requests to users during burst.
	 * Disable this if you restart Anope often and don't want to
	 * annoy your users.
	 */
	ctcpeob = "yes"
}

ChanStats

/*
 * Example configuration file for Chanstats.
 * Make sure BotServ, ChanServ and NickServ are running.
 */
 
module
{
	name = "m_chanstats"
 
	/*
	 * The name of this engine.
	 * This must match with the name of an SQL engine block.
	 */
 
	engine = "mysql/main"
 
	/*
	 * An optional prefix to prepended to the name of each created table.
	 * Do not use the same prefix for other programs.
	 */
	prefix = "anope_"
 
	smileyshappy = ":) :-) ;) ;-) :D :-D :P :-P"
	smileyssad = ":( :-( ;( ;-("
	smileysother = ":/ :-/"
 
	/*
	 * Enable Chanstats for newly registered nicks / channels.
	 */
	ns_def_chanstats = yes
	cs_def_chanstats = yes
}
command { service = "ChanServ"; name = "SET CHANSTATS"; command = "chanserv/set/chanstats"; }
command { service = "NickServ"; name = "SET CHANSTATS"; command = "nickserv/set/chanstats"; }
command { service = "NickServ"; name = "SASET CHANSTATS"; command = "nickserv/saset/chanstats"; }
 
module { name = "cs_fantasy_stats" }
command { service = "ChanServ"; name = "STATS"; command = "chanserv/stats"; }
command { service = "ChanServ"; name = "GSTATS"; command = "chanserv/gstats"; }
fantasy { name = "STATS"; command = "chanserv/stats"; }
fantasy { name = "GSTATS"; command = "chanserv/gstats"; }
 
module { name = "cs_fantasy_top" }
command { service = "ChanServ"; name = "TOP"; command = "chanserv/top"; }
command { service = "ChanServ"; name = "TOP10"; command = "chanserv/top10"; }
command { service = "ChanServ"; name = "GTOP"; command = "chanserv/gtop"; }
command { service = "ChanServ"; name = "GTOP10"; command = "chanserv/gtop10"; }
fantasy { name = "TOP"; command = "chanserv/top"; }
fantasy { name = "TOP10"; command = "chanserv/top10"; }
fantasy { name = "GTOP"; command = "chanserv/gtop"; }
fantasy { name = "GTOP10"; command = "chanserv/gtop10"; }